The assessment process must address all of the following items of evidence.
Ability to:
1. Access workplace information fuel supply requirements
2. Select, fit and use personal protective clothing and/or equipment
3. Confirm status of fuel supply system and related services. This may include confirming availability of auxiliary fuel
4. Conduct pre-start checks
5. Demonstrate set up and start up procedures in both manual and automatic modes and starting for normal operation and after emergency stops
6. Monitor fuel supply system operation. This typically includes monitoring:
fuel levels
bagasse belt height
temperature
fuel oil pressure (on auxiliary system)
speed
vibration
smell
noise
7. Take corrective action in response to abnormal or unacceptable performance
8. Demonstrate procedure for test firing burners
9. Demonstrate procedure for removing, inspecting, cleaning and replacing oil burners. This involves use of go/no go gauges on atomising tips
10. Demonstrate procedure for clearing fuel blockages or chokes throughout the system
11. Report and/or record corrective action as required
12. Demonstrate shift handover procedure and confirm that replacement operators are aware of equipment status and operating requirements prior to completing handover
13. Demonstrate procedure to take fuel supply system off-line
14. Demonstrate emergency procedures including operation of auxiliary/emergency fuel supply system
15. Demonstrate fuel storage and/or reclamation procedures as required in the workplace
16. Record operating information
17. Maintain work area to meet housekeeping standards
May include ability to:
18. Use process control systems
Knowledge of:
19. Relevant state OHS legislation, standards and codes of practice relating to work responsibilities
20. Safe work procedures including awareness of health and safety hazards related to operation of fuel supply system and associated control measures. Hazards typically include working with moving equipment, working on platforms, risk of bagasse forming an explosive dust and related risks of fire associated with hot work and spontaneous combustion
21. Hierarchy of hazard control measures
22. Purpose and limitations of protective clothing and equipment
23. Properties of bagasse and bagacillo and impact of variation on combustion
24. Impact of bagasse belt levels on system capacity to supply
25. Principles of flame management systems. This includes understanding of when and how to purge boiler before relighting in a flame out situation
26. Purpose and operation of auxiliary fuel supply
27. Functions and basic operating principles of fuel supply system, components and auxiliary equipment
28. Operating requirements and parameters
29. Supply system layout
30. The effect of fuel quality and supply on boiler operation
31. Relationship between viscosity and temperature for burner operation
32. Purpose of atomising steam and/or air
33. Purpose of purge cycle for the burner
34. Relationship between fuel supply system and other processes
35. Methods used to render equipment safe to inspect, maintain and/or clean including lock-out, tag-out and isolation procedures
36. Procedures for responding to emergency situations. This includes emergency shutdown procedure
37. Handover and long term shut down and storage procedures
38. Fuel storage requirements
39. Fuel reclamation options and procedures as appropriate for the workplace and fuel type
40. Environmental issues and controls
41. Requirements to liaise/advise related work areas
42. Housekeeping standards for the work area
43. Reporting and recording systems
May include knowledge of:
44. Basic operating principles of process control where relevant. This includes the relationship between control panels and systems and the physical equipment
Relationship with other standards
Pre-requisite units
There are no pre-requisite units for this competency standard.
Co-assessment of related units
Where the operator is required to operate a boiler, select the appropriate boiler operation unit.
Other units of competency relevant to the work role should be assessed in conjunction with this unit. This may include:
SUGZPCI2A Operate a process control interface
Resources required for assessment
Assessment must occur in a real or simulated workplace where the assessee has access to:
Bagasse fuel supply system and related equipment
Relevant codes and standards
Operating procedures and related advice on equipment operation
Personal protective clothing and equipment
Communication systems and equipment
Housekeeping standards and procedures
Workplace information recording systems, requirements and procedures
Assessment requirements
For information on how to assess this competency standard and who can assess, refer to the Assessment Guidelines for this Training Package.