The assessment process must address all of the following items of evidence.
Ability to:
1. Confirm status of weighbridge and related equipment at start up
2. Select, fit and use personal protective clothing and/or equipment
3. Demonstrate manual and automatic modes of operation as appropriate to workplace equipment
4. Demonstrate load weighing procedure. This includes confirming accuracy of weighbridge
5. Monitor weighbridge operation. This typically includes:
confirming correct bins are tipped
bin weights
zero of the bridge or within tolerance range
bin contents and fill height
bin delivery pushers and spotters as appropriate for equipment
6. Identify faults or non-conformance in operation
7. Take corrective action in response to abnormal or unacceptable performance
8. Use appropriate communication methods and equipment
9. Liaise with pushers and pin-pullers as required
10. Report and/or record corrective action as required
11. Complete weighbridge operation records
12. Maintain work area to meet housekeeping standards
May include the ability to:
13. Control yard movements of bins
14. Operate a tipping process
Knowledge of:
15. Relevant state OHS legislation, standards and codes of practice relating to work responsibilities, legislation relating to cane payment as it affects requirements weighing and sampling and weights and measures legislation
16. Functions and basic operating principles of weighbridge and related equipment components
17. Cut to crush sequence
18. The relationship between the weighbridge and downstream operations
19. Purpose and procedures for testing accuracy of weighbridge using test weights
20. Safe work procedures including awareness of health and safety hazards related to weighbridge operation and associated control measures
21. Purpose and limitations of protective clothing and equipment
22. Procedures for responding to emergency situations
23. Method to calculate net bin weight
24. Requirements to liaise/advise related work areas
25. Housekeeping standards for the work area
26. Reporting and recording systems
Relationship with other standards
Pre-requisite units
There are no pre-requisite units for this competency standard.
Co-assessment of related units
Other units of competency relevant to the work role should be assessed in conjunction with this unit. Where the weighbridge operator conducts yard control and/or tipping operations, the following related units are to be co-assessed with this unit.
Operate a tipping process
Control yard movements
Resources required for assessment
Assessment must occur in a real or simulated workplace where the assessee has access to:
Weighbridge and related equipment
Relevant codes of practice and industry standards
Operating procedures and related advice on equipment operation
Loaded cane bins
Personal protective clothing and equipment
Communication systems and equipment
Housekeeping standards and procedures
Workplace information recording systems, requirements and procedures
Assessment requirements
For information on how to assess this competency standard and who can assess, refer to the Assessment Guidelines for this Training Package.