Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

TDMMR107B Mapping and Delivery Guide
OPERATE AND MAINTAIN STEERING GEAR ARRANGEMENTS

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency TDMMR107B - OPERATE AND MAINTAIN STEERING GEAR ARRANGEMENTS
Description UNIT DESCRIPTOR:This unit involves the skills and knowledge required of a Master 5 or Skipper 3 to operate and maintain steering gear arrangements on a small commercial vessel.
Employability Skills Not applicable.
Learning Outcomes and Application The unit has applications in the qualification for a Master 5/Skipper 3 as per relevant sections of Part D of the National Standard for Commercial Vessels (NSCV), i.e. Certificate III in Transport&Distribution (Coastal Maritime Operations - Master Class 5).
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not applicable.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Operatesteering gear arrangements
  • Steering gear is operated in accordance with manufacturer's instructions
  • Problems encountered in the use of steering gear arrangements on the vessel are reported and/or rectified in accordance with established procedures
       
Element: Maintainsteering gear arrangements
  • Maintenance program for the steering gear arrangements on the vessel is prepared which fulfils all survey requirements
  • Checks of the vessel's steering gear are carried out in accordance with planned maintenance procedures and manufacturer's instructions
  • Any operational problems or faults with the vessel's steering gear are identified and appropriate maintenance action initiated
  • Lubricants are applied to moving parts of steering gear in accordance with manufacturer's instructions
  • Faulty steering gear equipment and parts are identified, reported and repaired or replaced in accordance with manufacturer's instructions and established procedures
  • Required adjustments to the steering gear arrangements are carried out in accordance with manufacturer's specifications
  • Records of maintenance work carried out are completed in accordance with planned procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

TDMMR107B OPERATE AND MAINTAIN STEERING GEAR ARRANGEMENTS

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package.

1

Critical aspects of evidence required to demonstrate competency in this unit

Assessment must confirm appropriate knowledge and skills to:

a

Operate and maintain steering gear arrangements on a small vessel

b

Identify problems related to the steering gear operation and maintenance and take appropriate action

c

Exercise all required safety, environmental and hazard control precautions and procedures during inspection and maintenance operations

d

Communicate effectively with others when operating and maintaining steering gear arrangements

2

Evidence required for demonstration of consistent performance

a

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

b

Consistently applies underpinning knowledge and skills when:

1

carrying out routine maintenance checks on steering gear arrangements

2

identifying and evaluating maintenance problems and determining appropriate courses of action

3

initiating and coordinating steering gear maintenance activities

4

applying safety precautions relevant to maintenance operations

c

Shows evidence of application of relevant workplace procedures, including:

1

relevant sections of State and Territory marine regulations, NSCV and USL Code

2

OH&S regulations and hazard prevention policies and procedures

3

job procedures and work instructions

4

relevant steering gear manufacturer's guidelines relating to routine maintenance procedures

5

environmental protection procedures when carrying out maintenance operations

d

Action is taken promptly to report and/or rectify defective steering gear equipment and components in accordance with established procedures

e

Work is completed systematically with required attention to detail

f

Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions among crew and others

(continued)

TDMMR107B OPERATE AND MAINTAIN STEERING GEAR ARRANGEMENTS

3

Context of assessment

a

Assessment of competency must comply with the assessment requirements of the relevant maritime regulations

b

Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation:

1

As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and

2

Appropriate practical assessment must occur:

i

at the registered training organisation; and/or

ii

on an appropriate working or training vessel

4Specific resources required for assessment

Access is required to opportunities to:

a

participate in a range of exercises, case studies and other simulated practical and knowledge assessments that demonstrate the skills and knowledge to operate and carry out maintenance on steering gear arrangements on a small vessel; and/or

b

operate and carry out maintenance on steering gear on an operational commercial or training small vessel


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

REQUIRED KNOWLEDGE

This describes the knowledge required for this unit.

1

Relevant sections of State and Territory regulations, NSCV and USL Code dealing with responsibilities of a Master 5/Skipper 3

2

Relevant OH&S legislation and policies

3

Principal design and safety features and component parts of steering gear arrangements used on small vessels

4

Basic principles of hydraulics

5

Procedures for operating typical steering gear arrangements found on small vessels

6

Procedures for the checking and inspecting of steering gear arrangements as part of routine maintenance procedures

7

Basic component parts, operation and survey requirements of steering gear arrangements on a small vessel

8

Repair and/or replacement procedures for steering gear arrangements and related components on board small vessels

9

Procedures for using hand tools for typical maintenance operations in steering gear arrangements on small vessels

10

Requirements for, and operation of, emergency steering systems

11

Safety, environmental and hazard control precautions and procedures relevant to inspection and maintenance of steering gear arrangements on small vessels

12

Maritime communication techniques needed during slipping and maintenance operations

13

Problems that may be experienced related to the operation and maintenance of steering gear arrangements and appropriate action and solutions

14

Maintenance records that must be maintained on a small vessel

REQUIRED SKILLS

This describes the basic skills required for this unit.

1

Use verbal communication skills required when operating and maintaining steering gear arrangements on a small vessel of less than 24 m in length

2

Read, interpret and apply operating and service manuals and instructions for operating and maintaining steering gear arrangements and related equipment, including all required OH&S procedures and precautions

3

Read and interpret material safety data sheets

4

Observe and interpret visual condition and indications of performance of the steering gear arrangements and related equipment

5

Complete any required operational and servicing records

6

Work safely and collaboratively with others when operating and maintaining steering gear arrangements and related equipment

7

Select and use relevant tools and equipment as per instructions

8

Recognise faulty equipment and take appropriate action as per operating instructions

9

Recognise routine problems when operating and maintaining steering gear arrangements and related equipment and take appropriate action

10

Adapt to differences in vessels, steering gear arrangements and related operating and servicing procedures

11

Operate steering gear arrangements on a small vessel of less than 24 m in length

TDMMR107B OPERATE AND MAINTAIN STEERING GEAR ARRANGEMENTS

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

VARIABLE

SCOPE

1. GENERAL CONTEXT

a.

Work must be carried out:

1

in compliance with the relevant sections of State and Territory marine regulations, NSCV and USL Code

b.

Work is performed:

1

within defined operational procedures, with responsibility for own outputs and limited responsibility for others in achieving the operation and maintenance of the steering gear arrangements for a small vessel

d.

Work requires:

1

preparing and implementing a planned steering gear maintenance program for a vessel up to 24 metres in length

2. WORKSITE ENVIRONMENT

a

Vessel may include:

1

any commercial vessel of less than 24 metres in length

b

Operation of the steering gear arrangements may be carried out:

1

when on passage

2

while manoeuvring

3

while preparing to get underway

c

Maintenance may include:

1

routine maintenance inspections

2

identification of any faults or operational problems

3

repairs of minor faults and imperfections in painted surfaces

4

identification of faulty equipment or fittings and arranging for repair or replacement

5

application of lubricants to moving parts of steering gear

d

Maintenance tools and equipment may include:

1

hand tools

2

greasing and lubrication tools

3

protective clothing and equipment such as:

i eye and ear protection

(continued)

TDMMR107B OPERATE AND MAINTAIN STEERING GEAR ARRANGEMENTS

VARIABLE

SCOPE

d

Maintenance tools and equipment may include:

ii safety boots

iii dust and fume masks

e

Documentation and records

may include:

1

planned maintenance procedures

2

maintenance schedules and records

3

steering gear manufacturer's instructions, specifications and recommended procedures

4

notices and instructions of relevant maritime authorities related to the maintenance of vessels

f

Applicable legislation, regulations and codes may include:

1

relevant sections of State and Territory marine regulations, NSCV and USL Code

2

relevant Commonwealth, State and Territory OH&S legislation

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Steering gear is operated in accordance with manufacturer's instructions 
Problems encountered in the use of steering gear arrangements on the vessel are reported and/or rectified in accordance with established procedures 
Maintenance program for the steering gear arrangements on the vessel is prepared which fulfils all survey requirements 
Checks of the vessel's steering gear are carried out in accordance with planned maintenance procedures and manufacturer's instructions 
Any operational problems or faults with the vessel's steering gear are identified and appropriate maintenance action initiated 
Lubricants are applied to moving parts of steering gear in accordance with manufacturer's instructions 
Faulty steering gear equipment and parts are identified, reported and repaired or replaced in accordance with manufacturer's instructions and established procedures 
Required adjustments to the steering gear arrangements are carried out in accordance with manufacturer's specifications 
Records of maintenance work carried out are completed in accordance with planned procedures 

Forms

Assessment Cover Sheet

TDMMR107B - OPERATE AND MAINTAIN STEERING GEAR ARRANGEMENTS
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

TDMMR107B - OPERATE AND MAINTAIN STEERING GEAR ARRANGEMENTS

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: