Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

TDMMR2807B Mapping and Delivery Guide
OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency TDMMR2807B - OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2
Description UNIT DESCRIPTOR:This unit involves the skills and knowledge required to operate and carry out basic routine servicing within the limits of responsibility and skill of a Marine Engine Driver Grade 2 on auxiliary systems on a small commercial vessel up to 750 kW propulsion power, including the steering gears; lubricating oil and cooling water systems; pumps, bilge and sea water systems; and fuel and fuel oil systems on the vessel.Note: Relevant State/Territory training and qualification requirements need to be fulfilled by any persons carrying out installation, maintenance and/or repair of refrigeration equipment especially with regard to preventing the escape of refrigerants into the atmosphere and to electrical work. Work on refrigeration systems only includes allowable basic operator servicing as per manufacturer's manual. Maintenance and repair of refrigeration systems on a vessel should only be performed by persons qualified under the relevant regulations.
Employability Skills Not applicable.
Learning Outcomes and Application The unit has application in the qualification for a Marine Engine Driver Grade 2 (MED 2) as per relevant sections of Part D of the National Standard for Commercial Vessels (NSCV), i.e. Certificate III in Transport&Distribution (Marine Engine Driving - Grade 2).
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not applicable.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Operate auxiliary systems
  • Auxiliary systems are operated as per instructions and specifications
  • Auxiliary systems are prepared, started and shut down in accordance with manufacturer's instructions
  • Records of performance are maintained on running sheets and operations logs in accordance with procedures
       
Element: Carry out basic, routine checking and servicing of auxiliary systems
  • The performance of auxiliary systems is routinely monitored in accordance with manufacturer's instructions
  • Poor performance and faults are identified and appropriate action initiated to report or rectify the problem as per standard operating procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

TDMMR2807B OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package.

1

Critical aspects of evidence required to demonstrate competency in this unit

Assessment must confirm appropriate knowledge and skills to:

a

Operate auxiliary systems on a small vessel

b

Carry out servicing and basic repairs of auxiliary systems on a small vessel

c

Identify typical problems related to the servicing of auxiliary systems on a small vessel and take appropriate action

d

Exercise all required safety, environmental and hazard control precautions and procedures during operation and routine servicing of auxiliary systems

e

Communicate effectively with others when operating and carrying out basic servicing on auxiliary systems on a small vessel

2

Evidence required for demonstration of consistent performance

a

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

b

Consistently applies underpinning knowledge and skills when:

1

operating auxiliary systems on a small commercial vessel

2

carrying out routine servicing of auxiliary systems on a small vessel

3

identifying and evaluating routine operational and basic servicing problems and determining appropriate courses of action

4

applying safety and pollution control precautions

c

Shows evidence of application of relevant workplace procedures, including:

1

relevant sections of State and Territory marine regulations, NSCV and USL Code

2

OH&S regulations and hazard prevention policies and procedures

3

job procedures and work instructions

4

manufacturer's guidelines relating to operating and routine servicing of auxiliary systems on a small vessel

5

environmental protection procedures when carrying out servicing operations

d

Action is taken promptly to report and/or rectify issues and problems identified with operating and servicing auxiliary systems

e

Work is completed systematically with required attention to detail

f

Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions among crew and others

(continued)

TDMMR2807B OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

3

Context of assessment

a

Assessment of competency must comply with the assessment requirements of the relevant maritime regulations

b

Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation:

1

As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and

2

Appropriate practical assessment must occur:

i

at the registered training organisation; and/or

ii

on an appropriate working or training vessel

4Specific resources required for assessment

Access is required to opportunities to:

a

participate in a range of exercises, case studies and other simulated practical and knowledge assessments that demonstrate the skills and knowledge to operate and service auxiliary systems on small vessels falling within the limits of responsibility of Marine Engine Driver Grade 2; and/or

b

operate and carry out routine servicing on auxiliary systems on an operational small commercial or training vessel within the limits of responsibility of a Marine Engine Driver Grade 2

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

REQUIRED KNOWLEDGE

This describes the knowledge required for this unit.

1

Relevant OH&S and pollution control legislation and codes of practice

2

Procedures for the operation and routine servicing of auxiliary systems on a small vessel

3

Safety, environmental and hazard control precautions and procedures relevant to the operation and routine servicing of auxiliary systems on a small vessel

4

Typical problems related to the during the operation and servicing of auxiliary systems on small vessels and appropriate action and solutions

5

Principal features and operating characteristics of typical steering systems and steering system components used on small vessels, including:

a

rudder construction

b

rudder types

c

rudder and stock support bearings

d

glands, packing and seals

e

tiller arm attachment

f

steering operation using hydraulic, cable, and rod and gear

g

requirements for the servicing and testing of steering and related hydraulic systems

6

Principal features and operating characteristics of typical pumping systems and pumping system components used on small vessels, including:

a

fire, bilge, and tank circulating systems

b

basic fault identification and servicing procedures

c

procedures for the prevention of corrosion in pumping systems

d

valve types, including their construction and maintenance

e

back flooding prevention procedures

f

strainers, mudboxes and footvalves

g

use of flexible materials, hoses, etc.

h

drive systems, belts, clutches, motors, etc.

7

Principal features and operating characteristics of typical fuel and fuel oil systems used on small vessels, including:

a

basic principles of operation of fuel and fuel oil systems

b

hazards when working with fuel and fuel oil systems

c

environmental issues and responsibilities concerning operation and servicing of fuel and fuel oil systems

TDMMR2807B OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

8

Principal features and operating characteristics of typical refrigeration system used on small vessels, including:

a

basic principles of operation

b

operating functions of component parts

c

start up and shut down procedures

d

system pump down procedures

e

procedures for starting a system that has not pumped down correctly

f

plant malfunctions and action that can be taken

g

dangers of refrigerant gases and related legislation

h

procedures for adding lubricating oil to a refrigeration compressor

9

Maritime communication techniques needed during the operation and servicing of auxiliary systems on small vessels

10

Servicing records that are maintained on a small commercial vessel

REQUIRED SKILLS

This describes the basic skills required for this unit.

1

Use verbal communication skills required when operating and servicing auxiliary systems and equipment

2

Read, interpret and apply operating and service manuals and instructions for auxiliary systems and equipment, including all required OH&S procedures and precautions

3

Read and interpret material safety data sheets

4

Read and interpret performance readings and indications

5

Complete any required operational and servicing records

6

Work safely and collaboratively with others when operating and servicing auxiliary systems and equipment

7

Select and use relevant tools and equipment as per instructions

8

Recognise faulty equipment and take appropriate action as per operating instructions

9

Recognise routine problems when operating and servicing auxiliary systems and equipment and take appropriate action

10

Adapt to differences in vessels, auxiliary systems and equipment and operating and servicing procedures

11

Operate marine auxiliary systems and equipment on vessels of less than 750 kW propulsion power

TDMMR2807B OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

VARIABLE

SCOPE

1. GENERAL CONTEXT

a.

Work must be carried out:

1

in compliance with the relevant sections of the Australian Uniform Shipping Laws (USL) Code applicable to small commercial vessels

b.

Work is performed:

1

within operational requirements, with responsibility for own outputs in relation to specified quality standards and limited responsibility for others in achieving the specified quality and quantity of outcomes

c.

Work involves:

1

the operation and routine servicing of the auxiliary systems on a small vessel and the application of solutions to a defined range of servicing problems

2. WORKSITE ENVIRONMENT

a

Vessel may include:

1

any small commercial vessel up to 750 kW propulsion power

b

Operation and servicing of auxiliary systems may be conducted:

1

by day or night in both normal and emergency situations

2

under any permissible conditions of weather

3

while underway

4

during berthing and unberthing operations

5

while anchored or moored

6

in dry dock

7

when bunkering

8

during cargo operations

c

Auxiliary systems may include:

1

steering gear, including emergency steering

2

lubricating oil and cooling water systems

3

pumps, bilge and sea water systems

4

refrigeration systems

(continued)

TDMMR2807B OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

VARIABLE

SCOPE

c

Auxiliary systems may include:

(continued)

5

fuel and fuel oil systems

d

Basic servicing may include:

1

routine servicing in accordance with established procedures

2

routine visual and performance checks

3

identification of poor performance or faults in the operation of auxiliary systems

4

identification of faulty equipment or fittings and arranging for repair or replacement

5

repair or replacement of faulty equipment and components

6

application of lubricants to moving parts of equipment in auxiliary systems

e

Servicing tools and equipment may include:

1

hand tools, including screwdrivers, spanners, wrenches

2

lifting gear and equipment

3

greasing and lubrication tools

4

protective clothing and equipment such as:

i

eye and ear protection

ii

safety boots and helmet

iii

dust and fume masks

f

Documentation and records may include:

1

relevant sections of State and Territory marine regulations, NSCV and USL Code related to the operation and servicing of auxiliary systems on small vessels

2

company servicing procedures

3

servicing schedules and records

4

manufacturer's instructions, specifications and recommended procedures

5

instructions, specifications and recommended procedures of manufacturer of servicing tools and materials

g

Applicable legislation, regulations and codes may include:

1

State and Territory marine regulations related to the operation of small vessels

2

National Standard for Commercial Vessels and USL Code

3

relevant Commonwealth, State and Territory OH&S and pollution control legislation

4

relevant Australian standards

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Auxiliary systems are operated as per instructions and specifications 
Auxiliary systems are prepared, started and shut down in accordance with manufacturer's instructions 
Records of performance are maintained on running sheets and operations logs in accordance with procedures 
The performance of auxiliary systems is routinely monitored in accordance with manufacturer's instructions 
Poor performance and faults are identified and appropriate action initiated to report or rectify the problem as per standard operating procedures 

Forms

Assessment Cover Sheet

TDMMR2807B - OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TDMMR2807B - OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: