Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

TDMMR5107B Mapping and Delivery Guide
CARRY OUT WINDLASS OPERATIONS ON A RIG

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency TDMMR5107B - CARRY OUT WINDLASS OPERATIONS ON A RIG
Description UNIT DESCRIPTOR:This unit involves the skills and knowledge required by Integrated Ratings when carrying out pre-operational checks and operating the windlasses on a commercial oil and/or gas rig, including performing pre-operational checks on the windlasses; greasing the machinery; operating the windlasses when running or recovering anchors or when repositioning a rig; and exercising all required safety, environmental and hazard control precautions and procedures during the operation and routine maintenance of the windlasses.
Employability Skills Not applicable.
Learning Outcomes and Application The unit has application in the qualification for an Integrated Rating, i.e. Certificate III in Transport&Distribution(Maritime Operations - Integrated Rating).
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not applicable.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Perform pre-operational checks on the windlass
  • Briefing meeting is attended prior to windlass operations and information is obtained and interpreted on the proposed work program and any unusual aspects of job or hazards that may be encountered
  • The condition of windlasses are checked as per established procedures
  • Where checks confirm operability of windlasses, appropriate action is taken to advise forthcoming shift
  • Where checks reveal that machinery is not working to satisfaction or specification, the problem is reported immediately and if required, the windlass is shut down in accordance with established procedures
  • Pre-shift greasing of windlasses, including fairleads, is completed in accordance with established procedures
  • Appropriate action is taken to ensure the auto greasing system has adequate grease to complete windlass operations
  • Checks are made that the spline clutch is engaged prior to windlass operation
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

TDMMR5107B CARRY OUT WINDLASS OPERATIONS ON A RIG

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package.

1

Critical aspects of evidence required to demonstrate competency in this unit

Assessment must confirm appropriate knowledge and skills to:

a

Perform pre-operational checks on windlasses

b

Carry out pre-operational precautions

c

Grease windlass machinery prior to operation

d

Operate windlasses for the running of anchors, when recovering anchors and when repositioning the rig

e

Coordinate windlass operations with other vessel operations

f

Ensure the exercise of all required safety, environmental and hazard control precautions and procedures during windlass operations

g

Communicate effectively with others during windlass operations

2

Evidence required for demonstration of consistent performance

a

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

b

Consistently applies underpinning knowledge and skills when:

1

performing pre-operational checks on windlasses

2

operating windlasses for the running of anchors, when recovering anchors and when repositioning the rig

3

exercising all required safety, environmental and hazard control precautions and procedures during windlass operations

4

communicating effectively with others during windlass operations

c

Shows evidence of application of relevant workplace procedures, including:

1

applicable sections of Safe Working Code of Practice for the Australian Offshore Support Vessel Industry

2

sections of relevant maritime regulations dealing with windlass operations on a rig

3

ISM Code and associated vessel's safety management system and procedures

4

OH&S regulations and hazard prevention policies and procedures

5

standard operating procedures and work instructions

6

windlass manufacturer's operating and maintenance specifications and instructions

(continued)

TDMMR5107B CARRY OUT WINDLASS OPERATIONS ON A RIG

2

Evidence required for demonstration of consistent performance

(continued)

7

following shipboard housekeeping processes

d

Action is taken promptly to report operational incidents and problems in accordance with regulations and shipboard procedures

e

Work is completed systematically with required attention to detail

f

Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions among crew and others

3

Context of assessment

a

Assessment of competency must comply with the assessment requirements of the relevant maritime regulations

b

Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation:

1

As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and

2

Appropriate practical assessment must occur:

i

at the registered training organisation; and/or

ii

on an appropriate working or training vessel

4

Specificresourcesrequired for assessment

Access is required to opportunities to:

a

demonstrate the ability to carry out and pre-operational checks and operate windlasses on an oil or gas rig through appropriate case studies and practical exercises; and/or

b

carry out supervised pre-operational checks and operate windlasses on operational off-shore oil and/or gas rig

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

REQUIRED KNOWLEDGE

This describes the knowledge required for this unit.

1

Applicable sections of Safe Working Code of Practice for the Australian Offshore Support Vessel Industry and relevant maritime regulations

2

ISM Code safety management system plans, procedures, checklists and instructions as they relate to the operation and maintenance of the windlasses on an off-shore oil and/or gas rig

3

Relevant OH&S and pollution control legislation and policies

4

Procedures for the pre-operational checks and operation of the windlasses on an off-shore oil and/or gas rig

5

Basic maintenance procedures for windlasses on a rig

6

Precautions to be taken prior to operating a windlass on a rig, including:

a

attendance at briefing meeting on windlass operations

b

checking that the chain locker seals are open prior to operating the winch to prevent damage to the seals

c

ensuring that the spline clutch is engaged prior to windlass operation

d

ensuring that hand-held radios are operational and communications are established prior to and during windlass operations

7

Operating characteristics and features of windlasses used when servicing an off-shore oil and/or gas rig

8

Established procedures for using windlasses on a rig

9

Procedures for identifying and reporting of faulty or out-of-specification operation of windlasses

10

Rig mooring procedures

11

Hazards and related safety precautions when operating and maintaining windlasses, including:

a

excessive pay out speed

b

excessive chain tension

c

noise

d

fouling of chain by the PCC during the repositioning of a rig

12

Communication equipment and techniques required during winch operations, including hand-held radios

REQUIRED SKILLS

This describes the basic skills required for this unit.

1

Use verbal and other communication techniques required when carrying out windlass operations on an oil or gas rig

2

Read, interpret and apply standard operating procedures for carrying out windlass operations on an oil or gas rig, including all required OH&S procedures and precautions

3

Read and interpret material safety data sheets

4

Observe and interpret indications of equipment performance

5

Complete any required operational and maintenance records

6

Carry out calculations required during windlass operations on an oil or gas rig

7

Work safely and collaboratively with others when carrying out windlass operations on an oil or gas rig

8

Select and use relevant tools and equipment as per instructions

9

Recognise faulty equipment and take appropriate action as per operating instructions

10

Recognise problems and hazards when carrying out windlass operations on an oil or gas rig and take appropriate preventative and corrective action

11

Adapt to differences in vessels, equipment and standard operating procedures

12

Operate windlass equipment as per standard operating procedures

TDMMR5107B CARRY OUT WINDLASS OPERATIONS ON A RIG

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

VARIABLE

SCOPE

1. GENERAL CONTEXT

a.

Work must be carried out:

1

in compliance with Safe Working Code of Practice for the Australian Offshore Support Vessel Industry, relevant maritime regulations and the Petroleum (Submerged Lands) Act

b.

Work is performed:

1

in accordance with established operational procedures, with some accountability and responsibility for self and others in achieving the required outcomes

c.

Work involves:

1

the application of established procedures and techniques for the operation and maintenance of the windlasses at an offshore oil and/or gas rigs when running or recovering anchors or for the repositioning of the rig

d.

Work requires:

1

the following of orders and instructions of the rig captain or the officer in charge of the watch

2. WORKSITE ENVIRONMENT

a

Vessel may include:

1

any commercial off-shore oil and gas rig

b

Windlass operation and pre-operational checks may be carried out:

1

by day or night in both normal and emergency situations

2

under any possible conditions of weather and sea

3

when running anchors

4

when recovering anchors

5

when repositioning of the rig

c

Windlass operations may include:

1

hauling in

2

dynamic pay out

3

emergency pay out

(continued)

TDMMR5107B CARRY OUT WINDLASS OPERATIONS ON A RIG

VARIABLE

SCOPE

d

Pre-operational checks and routine maintenance activities may include:

1

pre-operational checks of windlass performance and condition

2

checks that spline clutch is engaged prior to operation of a windlass

3

identification of any deterioration of winch performance

4

pre-shift greasing of windlasses

5

action to ensure auto greasing system has adequate grease

6

reporting of identified operational problems

7

shutting down of windlasses if required as a result of out of specification performance

e

Pre-operational precautions include:

1

attendance at briefing meeting on windlass operations

2

checks that the chain locker seals are open prior to operating the winch to prevent damage to the seals

3

checks that the spline clutch is engaged prior to windlass operation

4

confirmation that hand-held radios are operational and communications is established prior to and during windlass operations

f

Operational hazards may include:

1

noise

2

speed of pay out

3

moving heavy loads using unsafe lifting procedures

4

unsecured machinery, components or equipment

5

ropes, wires and cables

6

slippery deck

7

sharp tools and implements

8

moving and rotating machinery

9

faulty machinery equipment handling equipment and lifting gear

10

using equipment beyond safe working limits

11

poor housekeeping procedures

12

non-compliance with safe working procedures

g

Personal protective equipment may include:

1

ear muffs/plugs and goggles

2

gloves

3

life-jacket

4

overalls

(continued)

TDMMR5107B CARRY OUT WINDLASS OPERATIONS ON A RIG

VARIABLE

SCOPE

g

Personal protective equipment may include:

(continued)

5

steel capped boots

6

sun glasses and sun hat

7

vests

8

wet weather gear

h

Documentation and records

may include:

1

Safe Working Code of Practice for the Australian Offshore Support Vessel Industry

2

ISM Code safety management system plans, procedures, checklists and instructions

3

relevant IMO Conventions and Codes

4

AMSA Marine Orders

5

operational orders and instructions

6

manufacturer's manuals and specifications

7

material safety data sheets

8

rig and company procedures

9

instructions of relevant maritime authorities

i

Applicable legislation, regulations and codes may include:

1

Safe Working Code of Practice for the Australian Offshore Support Vessel Industry

2

relevant sections of IMO Conventions and Codes and AMSA Marine Orders

3

ISM Code

4

Marine Pollution Act (MARPOL)

5

Petroleum (Submerged Lands) Act

6

relevant international, Commonwealth, State and Territory OH&S legislation

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Briefing meeting is attended prior to windlass operations and information is obtained and interpreted on the proposed work program and any unusual aspects of job or hazards that may be encountered 
The condition of windlasses are checked as per established procedures 
Where checks confirm operability of windlasses, appropriate action is taken to advise forthcoming shift 
Where checks reveal that machinery is not working to satisfaction or specification, the problem is reported immediately and if required, the windlass is shut down in accordance with established procedures 
Pre-shift greasing of windlasses, including fairleads, is completed in accordance with established procedures 
Appropriate action is taken to ensure the auto greasing system has adequate grease to complete windlass operations 
Checks are made that the spline clutch is engaged prior to windlass operation 

Forms

Assessment Cover Sheet

TDMMR5107B - CARRY OUT WINDLASS OPERATIONS ON A RIG
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TDMMR5107B - CARRY OUT WINDLASS OPERATIONS ON A RIG

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: