TDMMR5307B CARRY OUT ANCHOR HANDLING, TOWAGE AND SUPPLY DUTIES AT A RIG |
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package. |
1 | Critical aspects of evidence required to demonstrate competency in this unit | Assessment must confirm appropriate knowledge and skills to:
|
a
| Prepare for and conclude anchor handling and towage operations on board a rig supply vessel
|
b
| Perform duties of an integrated rating during:
|
| 1
| anchor running/retrieval operations using the permanent chain chaser system
|
| 2
| anchor running/retrieval operations using the pennant and buoy system
|
c
| Perform duties of an integrated rating during towage operations at a rig
|
d
| Perform duties of an integrated rating during supply operations at a rig
|
e
| Ensure the exercise of all required safety, environmental and hazard control precautions and procedures during anchor handling, towage and supply operations at a rig
|
f
| Communicate effectively with others during anchor handling, towage and supply operations at a rig |
| |
2 | Evidence required for demonstration of consistent performance | a
| Performance is demonstrated consistently over a period of time and in a suitable range of contexts
|
b
| Consistently applies underpinning knowledge and skills when:
|
| 1
| preparing for and concluding anchor handling, towage and supply operations
|
| 2
| performing duties of an integrated rating during anchor handling, towage and supply operations
|
| 3
| exercising all required safety, environmental and hazard control precautions and procedures during anchor handling, towage and supply operations at a rig
|
| 4
| communicating effectively with others during anchor handling, towage and supply operations at a rig
|
c
| Shows evidence of application of relevant workplace procedures, including:
|
| 1
| Safe Working Code of Practice for the Australian Offshore Support Vessel Industry
|
| 2
| sections of relevant maritime regulations
|
| 3
| ISM Code and associated vessel's safety management system and procedures
|
(continued) TDMMR5307B CARRY OUT ANCHOR HANDLING, TOWAGE AND SUPPLY DUTIES AT A RIG |
2 | Evidence required for demonstration of consistent performance (continued)
| | 4
| OH&S regulations and hazard prevention policies and procedures
|
| 5
| standard operating procedures and work instructions
|
d
| Action is taken promptly to report operational incidents and problems in accordance with regulations and shipboard procedures
|
e
| Work is completed systematically with required attention to detail
|
f
| Recognises and adapts appropriately to cultural differences in the workplace, including modes of behaviour and interactions among crew and others |
3 | Context of assessment | a
| Assessment of competency must comply with the assessment requirements of the relevant maritime regulations
|
b
| Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation:
|
| 1 | As a minimum, assessment of knowledge must be conducted through appropriate written/oral examinations, and
|
| 2
| Appropriate practical assessment must occur:
|
| | i
| at the registered training organisation; and/or
|
| | ii
| on an appropriate working or training vessel |
| |
4 | Specific resources required for assessment | Access is required to opportunities to:
|
a
| demonstrate the ability to carry out routine integrated rating tasks during anchor handling, towage and supply operations on board a rig or supply vessel through appropriate case studies, practical exercises and simulated situations; and/or
|
b
| carry out routine integrated rating tasks during anchor handling, towage and supply operations on an operational support vessel or rig |