- TLIB407C - Carry out vehicle inspection
Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
TLIB407C Mapping and Delivery Guide
Carry out vehicle inspection
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | TLIB407C - Carry out vehicle inspection |
---|---|---|---|
Description | This unit involves the skills and knowledge required to carry out an inspection of a commercial vehicle, including action to implement vehicle manufacturers specifications for routine checks, to clean the vehicle, and to ensure that all specified safety requirements are met and that the vehicle is operational to the requirements of both the workplace and the relevant state/territory roads and traffic authority. | ||
Employability Skills | The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this competency is packaged will assist in identifying employability skill requirements. | ||
Learning Outcomes and Application | Work must be carried out in compliance with the regulations of the relevant roads and traffic authority concerned with the inspection of commercial vehicles.Work is performed with limited or minimum supervision, and with limited accountability and responsibility for self and others in achieving the prescribed outcomes. It involves the application of routine inspection principles and procedures to check the safety and operation of a commercial vehicle across a variety of operational contexts. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | Not applicable. | ||
Competency Field |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Check the vehicle |
| |||||||
Element: Clean vehicle |
| |||||||
Element: Complete documentation |
|
Evidence Required
List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package. | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying: the underpinning knowledge and skills relevant legislation and workplace procedures other relevant aspects of the range statement |
Context of and specific resources for assessment | Performance is demonstrated consistently over a period of time and in a suitable range of contexts Resources for assessment include: a range of relevant exercises, case studies and other simulated practical and knowledge assessment, and/or access to an appropriate range of relevant operational situations in the workplace In both real and simulated environments, access is required to: relevant and appropriate materials and/or equipment, and/or applicable documentation including workplace procedures, regulations, codes of practice and operation manuals |
Method of assessment | Assessment of this unit must be undertaken by a registered training organisation As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests Practical assessment must occur: through appropriately simulated activities at the registered training organisation, and/or in an appropriate range of situations in the workplace |
Submission Requirements
List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here
Assessment task 1: [title] Due date:
(add new lines for each of the assessment tasks)
Assessment Tasks
Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
REQUIRED KNOWLEDGE AND SKILLS |
This describes the essential knowledge and skills and their level required for this unit. |
Required knowledge: |
Relevant duty of care requirements for the routine inspection of vehicles |
Relevant OH&S and pollution control procedures |
Procedures for the routine inspection of a commercial vehicle in accordance with workplace and manufacturers requirements and established safety rules and regulations, including pre-operational checking procedures, visual inspection procedures and warning systems checking procedures |
Problems that may occur during the routine inspection of a vehicle and appropriate actions and solutions |
Basic principles of operation of systems on commercial vehicles, including electrical systems, fuel systems, cooling systems, steering systems, exhaust systems, tyres, brakes |
Reporting and documentation requirements |
Required skills: |
Communicate effectively with others during the routine inspection of a vehicle |
Read and interpret instructions, procedures, information and manuals relevant to the routine inspection of a vehicle |
Interpret and follow operational instructions and prioritise work |
Complete documentation related to the routine inspection of a vehicle |
Operate electronic communication equipment to required protocol |
Work collaboratively with others during the routine inspection of a vehicle |
Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others |
Promptly report and/or rectify any identified problems, faults or malfunctions that are identified during the routine inspection of a vehicle in accordance with regulatory requirements and workplace procedures |
Implement contingency plans for unexpected events that may occur during the routine inspection of a vehicle |
Apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities |
Monitor work activities in terms of planned schedule |
Modify activities depending on differing operational contingencies, risk situations and environments |
Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment |
Operate and adapt to differences in equipment in accordance with standard operating procedures |
Use cleaning equipment |
Select and use required personal protective equipment conforming to industry and OH&S standards |
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. | |
Maintenance may be carried out in typical road transport situations, including: | operations conducted at day or night typical weather conditions in confined spaces, exposed conditions and controlled or open environment while in the a depot, base or warehouse while in the vehicle on the road while at a client's workplace |
Type of vehicle may include any commercial road transport vehicles including: | light vehicles heavy vehicles combination vehicles |
Inspection may include: | visual checks of vehicle routine checks of vehicle systems checks in accordance with a detailed inspection schedule |
Routine checks may include: | water levels oil levels air pressure in tyres brakes lights condition of tyres battery exhaust system suspension |
Environmental hazards may include: | leaking oil and fuel defective or inappropriately adjusted exhaust systems inappropriate disposal of vehicle fluids in drains or sewerage systems |
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include: | company procedures enterprise procedures organisational procedures established procedures |
Information/records may include: | workplace routine inspection procedures, checklists and instructions relevant state/territory roads and traffic authority vehicle maintenance regulations vehicle manufacturers instructions, specifications and recommended procedures precautions and procedures to be adopted to protect the environment when inspecting, servicing and maintaining vehicles OH&S procedures to be followed when inspecting vehicles |
Applicable regulations and legislation may include: | relevant state/territory roads and traffic authority vehicle maintenance regulations and requirements relevant state/territory OH&S legislation relevant state/territory environmental protection legislation |
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.
Observation Checklist
Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice | Yes | No | Comments/feedback |
---|---|---|---|
A visual check of the internal and external condition of the vehicle is carried out following workplace procedures | |||
Pre-operational inspections and checks of the vehicle's tyres, suspension, fluid levels and other critical features are carried out to ensure conformance with the requirements of the relevant roads and traffic authority | |||
Associated equipment is tested to ensure it functions correctly to manufacturers specifications | |||
Post start-up and shut-down checks are carried out after engine is started to identify possible engine or electrical problems | |||
Warning systems (instruments and gauges) are checked to ensure they are operational | |||
Where relevant, vehicle monitoring device is logged on/off in accordance with manufacturers instructions and workplace policy | |||
Vehicle and associated equipment is cleaned in accordance with workplace procedures and legislation | |||
Basic faults are identified and/or diagnosed and appropriate action is taken to report or remedy them as required by workplace procedures and legislation | |||
Records of inspection are updated and recommended repairs are documented in accordance with workplace polices |
Forms
Assessment Cover Sheet
TLIB407C - Carry out vehicle inspection
Assessment task 1: [title]
Student name:
Student ID:
I declare that the assessment tasks submitted for this unit are my own work.
Student signature:
Result: Competent Not yet competent
Feedback to student
Assessor name:
Signature:
Date:
Assessment Record Sheet
TLIB407C - Carry out vehicle inspection
Student name:
Student ID:
Assessment task 1: [title] Result: Competent Not yet competent
(add lines for each task)
Feedback to student:
Overall assessment result: Competent Not yet competent
Assessor name:
Signature:
Date:
Student signature:
Date: