Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

TLIF107C Mapping and Delivery Guide
Follow occupational health and safety procedures

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency TLIF107C - Follow occupational health and safety procedures
Description This unit involves the skills and knowledge required to follow and apply OH&S procedures when carrying out work activities, including identifying and following workplace procedures for hazard identification and risk control, contributing to arrangements for the management of occupational health and safety, and completing occupational health and safety records.
Employability Skills The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this competency is packaged will assist in identifying employability skill requirements.
Learning Outcomes and Application Work must be carried out in compliance with the relevant OH&S regulations and procedures.Work is performed under some supervision generally within a team environment. It involves the application of the established OH&S and hazard minimisation principles and procedures to the conduct of workplace activities.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Not applicable.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Follow workplace procedures for hazard identification and risk control
  • Workplace procedures for dealing with accidents, fire and emergencies are known and followed
  • Workplace procedures for OH&S and related work instructions for controlling risks in a workplace are accurately followed
  • Hazards in the workplace are identified and appropriate action is taken to report them and to minimise or eliminate risk to personnel, workplace and the environment
  • Safety regulations and established workplace safety and hazard control practices and procedures are obtained, interpreted and applied to day-to-day work activities
  • Where relevant, procedures and precautions necessary for entry into confined spaces in the workplace are correctly followed
  • Personal protection clothing and equipment is correctly used in accordance with established safety practices and procedures
  • Established emergency and contingency plans are followed in the event of an emergency
       
Element: Contribute to arrangements for the management of occupational health and safety
  • OH&S issues and identified safety hazards are raised with designated personnel in accordance with workplace procedures and relevant OH&S legislation
  • Contributions to OH&S management in the workplace are made in accordance with workplace procedures and provisions of relevant legislation
  • OH&S issues are raised with designated personnel in accordance with workplace procedures and relevant OH&S legislation
  • Participative arrangements for OH&S management in the workplace are contributed to within workplace procedures and scope of responsibilities and competencies
       
Element: Complete occupational health and safety records
  • OH&S records for self are completed in accordance with workplace requirements
  • OH&S records and legal requirements for the maintenance of records of occupational injury and diseases are followed
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:

the underpinning knowledge and skills

relevant legislation and workplace procedures

other relevant aspects of the range statement

Context of and specific resources for assessment

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

Resources for assessment include:

a range of relevant exercises, case studies and other simulated practical and knowledge assessment, and/or

access to an appropriate range of relevant operational situations in the workplace

In both real and simulated environments, access is required to:

relevant and appropriate materials and/or equipment, and/or

applicable documentation including workplace procedures, regulations, codes of practice and operation manuals

Method of assessment

Assessment of this unit must be undertaken by a registered training organisation

As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests

Practical assessment must occur:

through appropriately simulated activities at the registered training organisation, and/or

in an appropriate range of situations in the workplace

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

REQUIRED KNOWLEDGE AND SKILLS

This describes the essential knowledge and skills and their level required for this unit.

Required knowledge:

Relevant OH&S procedures and guidelines

Risks when using manually-operated equipment to shift loads and related precautions to control the risk

Reporting procedures in regard to unsafe situations, fire hazards, broken or damaged equipment or fittings, sickness and accidents

Location and use of safety alarms, manifests, emergency shut-off systems, emergency communication systems

Signs and signals used for OH&S warnings

Terms used in material safety data sheets (where relevant)

HAZCHEM symbols and implications for safe work and storage

Storage and use of hazardous substances

Handling of broken or damaged equipment

Manual and mechanically assisted lifting and load shifting procedures

Transport requirements for goods within workplace

Emergency and evacuation procedures

Housekeeping standards and procedures required in the workplace

Site layout and obstacles

Required skills:

Communicate effectively with others when following OH&S procedures

Read and comprehend simple statements in English

Read and interpret relevant safety-related information including safety labels, instructions for safe work, relevant material safety data sheets, workplace procedures and codes of practice

Identify containers and goods coding, ADG and IMDG markings and where applicable emergency information panels

Interpret and follow operational instructions and prioritise work

Complete documentation related to OH&S in the workplace

Operate electronic communication equipment to required protocol

Estimate the size shape and special requirements of loads

Work collaboratively with others when following OH&S procedures

Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others

Promptly report and/or rectify any identified problems, faults or malfunctions that may arise when following OH&S procedures in accordance with regulatory requirements and workplace procedures

Implement contingency plans for unanticipated situations that may occur when following OH&S procedures

Apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities

Monitor work activities in terms of planned schedule

Modify activities depending on differing operational contingencies, risk situations and environments

Apply fatigue management knowledge and techniques

Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment

Operate and adapt to differences in equipment in accordance with standard operating procedures

Select and use required personal protective equipment conforming to industry and OH&S standards

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

The shifting operations may be conducted:

in a range of work environments

by day or night

Customers may be:

internal or external

Workplaces may comprise:

large, medium or small worksites

Work may be conducted in:

restricted spaces

exposed conditions

controlled or open environments

Workplace hazards may include:

chemicals and other harmful substances

movements of equipment, goods, vehicles

toxic substances

damaged packing material and containers

broken and damaged equipment

inflammable materials and fire hazards

lifting practices

waste management and disposal

extremes in weather conditions

lighting levels

floor surfaces

water hazards

traffic flows, vehicle and equipment operation

A range of storage areas

Personnel in the work area may include:

workplace personnel

site visitors

OH&S specialists

union representatives

contractors

official representatives

Participative arrangements may include:

formal and informal meetings which deal with OH&S issues

workplace OH&S committees

other committees, for example, consultative, planning and purchasing

OH&S representatives

suggestions, requests, reports and concerns put forward by staff

Communication in the work area may include:

phone

electronic data interchange

fax

email

internet

radio

Designated personnel may include:

workplace personnel

supervisors

team leaders

management

occupational health and safety personnel

other persons authorised or nominated by the organisation

Personal protective equipment may include:

gloves

safety headwear and footwear

safety glasses

two-way radios

high visibility clothing

Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:

company procedures

enterprise procedures

organisational procedures

established procedures

Information/documents may include:

OH&S regulations

workplace OH&S procedures and policies

codes of practice including the National Standards for Manual Handling and the Industry Safety Code

ADG Code and material safety data sheets (where relevant)

policies and procedures for entry and work in confined spaces

manufacturers instructions concerning the use and servicing of equipment

supplier and/or client instructions

emergency procedures

regulations and policies concerning noise, smoking, work station ergonomics and other critical OH&S issues

goods identification numbers and codes

manifests, bar codes, goods and container identification

relevant legislation, regulations and related documentation

award, enterprise bargaining agreement, other industrial arrangements

standards and certification requirements

quality assurance procedures

Applicable regulations and legislation may include:

relevant state/territory OH&S legislation and safety codes, including manual handling, noise, confined spaces, smoking, workplace ergonomics, etc.

general duty of care under OH&S legislation

workplace relations regulations

workers compensation regulations

dangerous goods regulations

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Workplace procedures for dealing with accidents, fire and emergencies are known and followed 
Workplace procedures for OH&S and related work instructions for controlling risks in a workplace are accurately followed 
Hazards in the workplace are identified and appropriate action is taken to report them and to minimise or eliminate risk to personnel, workplace and the environment 
Safety regulations and established workplace safety and hazard control practices and procedures are obtained, interpreted and applied to day-to-day work activities 
Where relevant, procedures and precautions necessary for entry into confined spaces in the workplace are correctly followed 
Personal protection clothing and equipment is correctly used in accordance with established safety practices and procedures 
Established emergency and contingency plans are followed in the event of an emergency 
OH&S issues and identified safety hazards are raised with designated personnel in accordance with workplace procedures and relevant OH&S legislation 
Contributions to OH&S management in the workplace are made in accordance with workplace procedures and provisions of relevant legislation 
OH&S issues are raised with designated personnel in accordance with workplace procedures and relevant OH&S legislation 
Participative arrangements for OH&S management in the workplace are contributed to within workplace procedures and scope of responsibilities and competencies 
OH&S records for self are completed in accordance with workplace requirements 
OH&S records and legal requirements for the maintenance of records of occupational injury and diseases are followed 

Forms

Assessment Cover Sheet

TLIF107C - Follow occupational health and safety procedures
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

TLIF107C - Follow occupational health and safety procedures

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: