Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEECD0055 Mapping and Delivery Guide
Write specifications for industrial electronics and control projects

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEECD0055 - Write specifications for industrial electronics and control projects
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to write specifications for industrial electronics and control projects.It includes determining client expectations, ensuring cost-effective solutions are pursued, and documenting design and technical requirements.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in suitable workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated suitable workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

relevant and appropriate materials, tools, facilities and equipment currently used in industry

resources that reflect current industry practices in relation to writing specifications for industrial electronics and control engineering projects.

applicable documentation, including workplace procedures, equipment specifications, regulations, codes of practice and operation manuals.
Prerequisites/co-requisites
Competency Field Cross Discipline
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare specification requirements
  • Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
       
Element: Techniques for specification writing are reviewed and adopted in accordance with workplace procedures
       
Element: Scope of industrial electronics and control projects specification is determined using formal evaluation/survey processes
       
Element: Criteria from related works impacting on specification are determined from relevant documentation, site visits and/or in consultation with relevant person/s
  • Specification is developed to include scenarios and requirements in consultation with relevant person/s and relevant industry standards
       
Element: Specification is developed in collaboration with relevant design professionals and contractors involved in the project
       
Element: Relevant person/s required for project are identified and roles specified in the specification
       
Element: Specification is reviewed against inputs and adjusted to rectify any anomalies
       
Element: Specification is developed and documented in accordance with workplace procedures
       
Element: Obtain approval of specification
  • Specification is presented and discussed with relevant person/s
       
Element: Alterations to specification resulting from discussions are negotiated with relevant person/s in accordance with workplace procedures
       
Element: Specification is finalised and approval obtained from relevant person/s
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including

using risk control measures

determining scope of the specification industrial electronics and control projects

determining the impact of related works.

developing and documenting specifications

developing specification in collaboration with relevant person/s

developing specification incorporating scenarios and requirements

negotiating alterations to the proposed specification

obtaining approval of the final specification

preparing specification requirements

presenting and discussing specification

reviewing and adopting techniques for specification writing

reviewing inputs and rectifying anomalies.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

relevant design professionals, suppliers and manufacturers

relevant industrial electronics and control engineering specifications

relevant industry standards

relevant manufacturer specifications

relevant research skills

relevant job safety assessments or risk mitigation processes

relevant specification inputs and anomalies

relevant specification writing techniques

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace instructions, policies and procedures.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Developing specification must include at least one medium-sized industrial electronics and control project and include at least the following:

safety requirements met

client expectations established

cost-effective solutions pursued and assured

design and technical requirements documented

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied 
 
 
Specification is developed to include scenarios and requirements in consultation with relevant person/s and relevant industry standards 
 
 
 
 
Specification is presented and discussed with relevant person/s 
 
 

Forms

Assessment Cover Sheet

UEECD0055 - Write specifications for industrial electronics and control projects
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEECD0055 - Write specifications for industrial electronics and control projects

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: