Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEECS0004 Mapping and Delivery Guide
Commission industrial computer systems

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEECS0004 - Commission industrial computer systems
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to commission industrial computer systems.It encompasses applying safe working practices, testing system parameters, adjusting to assure optimum performance, following workplace procedures, and documenting final adjustment parameters and settings.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, skills and knowledge described in this unit require a relevant contract of training, such as an Australian Apprenticeship. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations. Permits may also be required for some work environments, such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.No other licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in suitable workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated suitable workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

relevant and appropriate materials, tools, facilities and equipment currently used in industry

resources that reflect current industry practices in relation to commissioning computer systems

applicable documentation, including workplace procedures, equipment specifications, regulations, codes of practice and operation manuals.
Prerequisites/co-requisites
Competency Field Computer Systems
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to commission computer systems
  • WHS/OHS processes and workplace procedures for a given work area are identified, obtained and applied
       
Element: WHS/OHS risk control measures and workplace procedures in preparation for the work are followed
       
Element: Safety hazards that have not previously been identified are noted and risk control measures implemented
       
Element: Relevant person/s is consulted to ensure work is coordinated effectively with others involved on the worksite
       
Element: System operating parameters are identified by reviewing system specifications and component technical data
       
Element: Tools, equipment, applications and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety
       
Element: Preparatory work is checked to ensure no damage has occurred in accordance with workplace procedures
       
Element: Circuits are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
       
Element: Commission computer systems
  • WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
       
Element: Testing/measuring devices are connected and set up in accordance with relevant industry standards
       
Element: Measurements and adjustments are made to computer equipment to provide optimum system performance in accordance with system specifications and/or relevant industry standards
       
Element: Decisions for dealing with unplanned situations are dealt with in consultation with relevant person/s and job specifications in accordance with relevant industry standards
       
Element: Methods for dealing with unexpected situations are selected on the basis of safety and specified work outcomes
       
Element: Systems commissioning workplace procedures are performed in accordance with relevant industry standards
       
Element: Commissioning is carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy principles
       
Element: Complete and report commissioning activities
  • WHS/OHS risk control work completion measures and workplace procedures are followed
       
Element: Adjustment settings are documented in accordance with workplace procedures
       
Element: Worksite is cleaned and made safe in accordance with workplace procedures
       
Element: Commissioning results and work completion are notified to relevant person/s in accordance with workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:

using risk control measures

checking and isolating circuits

checking work to ensure no damage and/or waste to apparatus, environment, materials and services

commissioning systems in accordance with workplace procedures

connecting and setting up testing/measuring devices

dealing with unplanned events in consultation with relevant person/s and job specifications

consulting with relevant person/s to ensure work is coordinated effectively

documenting adjustment settings in accordance with workplace procedures

identifying system performance parameters by reviewing system specifications and component technical data

measuring and adjusting computer equipment to provide optimum system performance

obtaining tools, equipment, applications and testing devices required for work

preparing to commission computer systems

using sustainable energy practices.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

problem-solving techniques

relevant commissioning, including:

commissioning, planning and documentation

purpose of commissioning

workplace procedures for commissioning systems

relevant industrial computer systems

relevant industry standards

relevant manufacturer specifications and installation instructions

relevant materials, apparatus, environment and services

relevant job safety assessments or risk mitigation processes

relevant system operating parameters

relevant tools, equipment, applications and testing/measuring devices

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies and procedures

sustainable energy principles.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Commissioning industrial computer systems must include at least two of the following:

different types of computer systems

associated components

controls

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
WHS/OHS processes and workplace procedures for a given work area are identified, obtained and applied 
 
 
 
 
 
 
 
WHS/OHS risk control measures and workplace procedures for carrying out the work are followed 
 
 
 
 
 
 
WHS/OHS risk control work completion measures and workplace procedures are followed 
 
 
 

Forms

Assessment Cover Sheet

UEECS0004 - Commission industrial computer systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEECS0004 - Commission industrial computer systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: