Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEEEC0027 Mapping and Delivery Guide
Enter instructions and test wired and wireless security systems

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEEEC0027 - Enter instructions and test wired and wireless security systems
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to enter instructions and test wired and wireless security systems.It includes entering instructions and testing electronic security systems with up to 50 connected devices typically used in single domestic and small commercial premises. It also includes working safely, programming as directed in user manuals, adjusting security devices, system testing and following written and oral instruction and workplace procedures.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, skills and knowledge described in this unit require a relevant contract of training, such as an Australian Apprenticeship. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment

Assessment must occur in suitable workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in suitable simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or other simulations

relevant and appropriate materials, tools, facilities, equipment and personal protective equipment (PPE) currently used in industry

resources that reflect current industry practices in relation to entering instructions, and testing basic wired and wireless security systems

applicable documentation, including workplace procedures, equipment specifications, regulations, codes of practice and operation manuals.
Prerequisites/co-requisites
Competency Field Electronics and Communications
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to enter instructions and test security system
  • WHS/OHS requirements and workplace procedures for a given work area are identified and applied
       
Element: WHS/OHS risk control measures are followed in preparation for security system work
       
Element: Safety hazards not previously identified are risk assessed, reported and advice on risk control measures sought from the work supervisor
       
Element: Nature and location of security system work is obtained from work supervisor or other appropriate person/s to determine the scope of work to be undertaken
       
Element: Advice is sought from the work supervisor or other appropriate person/s to ensure the work is coordinated effectively with others
       
Element: Sources of materials required for security system work are determined in accordance with workplace routines
       
Element: Tools, equipment and testing devices needed to carry out security system work are obtained and checked for correct operation and safety
       
Element: Enter instructions and test wired and wireless security system
  • WHS/OHS risk control measures for carrying out the work are followed
       
Element: Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
       
Element: Security devices are checked for correct location and alignment
       
Element: Security functions are entered into the security system in accordance with manufacturer instructions
       
Element: Security system is inspected and tested in accordance with manufacturer instructions
       
Element: Security system operational malfunctions are identified and corrected
       
Element: Unplanned situations are responded to in accordance with workplace procedures and discussions with immediate supervisor for directions in a manner that minimises risk to personnel and equipment
       
Element: Security program and testing is carried out efficiently without waste of materials or damage to apparatus, circuits or the surrounding environment using sustainable energy practices
       
Element: Complete and document security system work activities
  • WHS/OHS work completion risk control measures and workplace procedures are followed
       
Element: Worksite is cleaned and made safe in accordance with workplace procedures
       
Element: Security system is documented in accordance with regulatory requirement and workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, workplace procedures and practices, including using risk control measures

applying sustainable energy principles and practices

dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

documenting ‘as-installed’ system correctly

entering system instructions using relevant information technology

identifying and correcting operational malfunctions

testing system functions.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

access and detection functions

diagnostic functions and their use

relevant job safety assessments or risk mitigation processes

relevant manufacturer specifications

relevant WHS/OHS legislated requirements

relevant workplace documentation

relevant workplace policies and procedures

security systems software function and configurations, including relevant information technology and configuration options.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Security system must consist of a controller and an access device and at least two other different connected devices, both wired and wireless and include at least the following:

entering instructions and testing wired and wireless security systems for two security systems

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
WHS/OHS requirements and workplace procedures for a given work area are identified and applied 
 
 
 
 
 
 
WHS/OHS risk control measures for carrying out the work are followed 
 
 
 
 
 
 
 
WHS/OHS work completion risk control measures and workplace procedures are followed 
 
 

Forms

Assessment Cover Sheet

UEEEC0027 - Enter instructions and test wired and wireless security systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEEEC0027 - Enter instructions and test wired and wireless security systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: