Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEEEC0032 Mapping and Delivery Guide
Fault find and repair high-volume office equipment
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEEEC0032 - Fault find and repair high-volume office equipment | |
---|---|---|---|---|
Description | ||||
Employability Skills | ||||
Learning Outcomes and Application | This unit involves the skills and knowledge required to fault find and repair high-volume office equipment. It includespreparing to find and repair faults, finding and repairing faults, and completing and reporting on fault-finding and repair activities.Permits may be required for some work environments such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.No licensing, legislative or certification requirements apply to this unit at the time of publication. | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
|
|||
Prerequisites/co-requisites | ||||
Competency Field | Electronics and Communications |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to find and repair faults |
| |||||||
Element: Risk control measures are applied in accordance with workplace procedures prior to commencing work | ||||||||
Element: Scope of the fault is obtained from documentation, relevant person/s and customer to determine work | ||||||||
Element: Instructions for coordinating work with others are obtained from relevant person/s and applied | ||||||||
Element: Materials required for work are determined in accordance with workplace procedures | ||||||||
Element: Tools, equipment and testing devices required for work are obtained in accordance with workplace procedures and checked for correct operation and safety | ||||||||
Element: Find and repair faults |
| |||||||
Element: Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Apparatus is checked and isolated, as required, in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Fault finding is undertaken methodically applying principles of office equipment and using measurements of operating parameters and built-in fault indicators in accordance with manufacturer instructions and workplace procedures | ||||||||
Element: Equipment components are dismantled, as required, and parts stored to protect against loss or damage | ||||||||
Element: Faulty components are rechecked and their fault status confirmed | ||||||||
Element: Faulty components are readjusted or replaced in accordance with workplace procedures | ||||||||
Element: Effectiveness of the repaired component is tested in accordance with workplace procedures | ||||||||
Element: Apparatus is reassembled, tested and prepared for return to customer | ||||||||
Element: Unplanned situations are dealt with safely and with the approval of relevant person/s | ||||||||
Element: Fault finding and repairs are conducted efficiently without waste of materials, damage to apparatus, the surrounding environment or services applying sustainable energy practices | ||||||||
Element: Complete and report fault-finding and repair activities |
| |||||||
Element: Work area is cleaned and made safe in accordance with workplace procedures | ||||||||
Element: Justification is provided in the required format for repairs to apparatus, including components and materials used | ||||||||
Element: Acceptance that the reported fault/s has been repaired is sought from relevant person/s in accordance with workplace procedures |