Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEEEC0035 Mapping and Delivery Guide
Fault find and repair satellite-based surveillance and observation systems
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEEEC0035 - Fault find and repair satellite-based surveillance and observation systems | |
---|---|---|---|---|
Description | ||||
Employability Skills | ||||
Learning Outcomes and Application | This unit involves the skills and knowledge required to fault find and repair satellite-based surveillance and observation systems.It includespreparing to find and repair faults, finding and repairing faults, and completing and reporting fault-finding and repair activities.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, skills and knowledge described in this unit require a relevant contract of training, such as an Australian Apprenticeship.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.Permits may also be required for some work environments, such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.No other licensing, legislative or certification requirements apply to this unit at the time of publication. | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
|
|||
Prerequisites/co-requisites | ||||
Competency Field | Electronics and Communications |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to find and repair faults |
| |||||||
Element: Risk control measures are applied in accordance with workplace procedures prior to commencing work | ||||||||
Element: Risks/hazards are identified, assessed and reported to relevant person/s, and control measures implemented | ||||||||
Element: Extent of faults is determined from reports, other relevant documentation and discussions with relevant person/s | ||||||||
Element: Relevant person/s is consulted to ensure the work is coordinated effectively with others | ||||||||
Element: Tools, equipment and testing devices required to diagnose faults are obtained in accordance with workplace procedures and checked for correct operation and safety | ||||||||
Element: Find and repair faults |
| |||||||
Element: Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Circuits/machines/plant are checked and isolated, as required, in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Logical diagnostic methods are applied to diagnose satellite-based surveillance and observation system faults employing measurements and estimations of system operating parameters referenced to system operational requirements in accordance with workplace procedures and relevant industry standards | ||||||||
Element: Suspected fault scenarios are tested as being the source of system problems | ||||||||
Element: Source of the fault is identified and relevant person/s engaged to rectify the fault where it is outside the scope of capability in accordance with workplace procedures and relevant industry standards | ||||||||
Element: Faults in the electronic components of the system are rectified to raise satellite-based surveillance and observation system to its operation standard | ||||||||
Element: System is tested to verify that the system operates as intended and to specified requirements in accordance with workplace procedures and job specifications | ||||||||
Element: Decisions for dealing with unplanned situations are made in accordance with relevant industry standards, job specifications and discussions with relevant person/s | ||||||||
Element: Methods for dealing with unplanned situations are selected on the basis of safety and specified work outcomes | ||||||||
Element: Diagnosis and rectification activities are carried out efficiently without waste of materials, damage to apparatus, the surrounding environment or services applying sustainable energy practices | ||||||||
Element: Complete and report fault-finding and repair activities |
| |||||||
Element: Worksite is made safe in accordance with workplace procedures | ||||||||
Element: Rectification of faults is reported in accordance with workplace procedures | ||||||||
Element: Relevant person/s is notified that the system faults have been rectified in accordance with workplace procedures |