Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEEEC0049 Mapping and Delivery Guide
Program and commission commercial security closed-circuit television systems
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEEEC0049 - Program and commission commercial security closed-circuit television systems | |
---|---|---|---|---|
Description | ||||
Employability Skills | ||||
Learning Outcomes and Application | This unit involves the skills and knowledge required to program and commission commercial security closed-circuit television (CCTV) systems.It includes programming and testing security CCTV systems typically used in commercial buildings and premises It also includes working safely, following commercial security CCTV system specifications, programming security functions and schedules, and providing 'as-programmed' documentation.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, skills and knowledge described in this unit require a relevant contract of training, such as an Australian Apprenticeship. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.Permits may also be required for some work environments, such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation. | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
|
|||
Prerequisites/co-requisites | ||||
Competency Field | Electronics and Communications |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to program commercial security CCTV system |
| |||||||
Element: WHS/OHS risk control measures and workplace procedures are followed in preparation for commercial security CCTV system work | ||||||||
Element: Safety hazards not previously identified are risk assessed, documented and risk control measures devised and implemented in consultation with appropriate person/s | ||||||||
Element: Extent of programming and commissioning is determined from reports, documentation and from discussions with appropriate person/s | ||||||||
Element: Appropriate person/s is consulted to ensure commercial security CCTV system work is coordinated effectively with others involved on the worksite | ||||||||
Element: Tools, equipment and testing devices needed to program commercial security CCTV system are obtained in accordance with workplace procedures and checked for correct operation and safety | ||||||||
Element: Program and commission commercial security CCTV system |
| |||||||
Element: Need to test and measure live work is determined in accordance with WHS/OHS requirements and, as required, conducted within workplace safety procedures | ||||||||
Element: Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Security CCTV functions are entered into the commercial security system in accordance with design specifications | ||||||||
Element: Security CCTV devices are checked for correct location and alignment | ||||||||
Element: Security CCTVs are inspected and tested in accordance with commissioning requirements | ||||||||
Element: Sources of CCTV anomalies are identified and corrected | ||||||||
Element: Unplanned situations are responded to in accordance with workplace procedures, discussions with appropriate person/s and job specifications and requirements in a manner that minimises risk to personnel and equipment | ||||||||
Element: Methods for dealing with unplanned situations are selected on the basis of safety and specified work outcomes | ||||||||
Element: Programming and commissioning activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices | ||||||||
Element: Complete and report programming and commissioning activities |
| |||||||
Element: Worksite is made safe in accordance with workplace safety procedures | ||||||||
Element: 'As-installed' security CCTV system is documented and appropriate person/s notified in accordance with workplace procedures |