Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEEEC0063 Mapping and Delivery Guide
Solve fundamental electronic communications system problems
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEEEC0063 - Solve fundamental electronic communications system problems | |
---|---|---|---|---|
Description | ||||
Employability Skills | ||||
Learning Outcomes and Application | This unit involves the skills and knowledge required to solve fundamental electronic communications system problems.It includes ascertaining correct operation of communications system and solving fundamental system problems as met in engineering support work functions. It also includes working safely, applying problem-solving techniques, using a range of measuring devices, and providing solutions derived from measurements to predictable problems in an electronic communications system.Permits may be required for some work environments, such as confined spaces, working aloft, near live electrical apparatus and site rehabilitation.No licensing, legislative or certification requirements apply to this unit at the time of publication. | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
|
|||
Prerequisites/co-requisites | ||||
Competency Field | Electronics and Communications |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to solve fundamental problems in electronic communications system |
| |||||||
Element: WHS/OHS risk control measures and workplace procedures are followed in preparation for electronic communications system work | ||||||||
Element: Safety hazards not previously identified are risk assessed, noted on job safety assessments and established risk control measures implemented | ||||||||
Element: Nature of the communications system problem is obtained from documentation or from work supervisor to determine the scope of work to be undertaken | ||||||||
Element: Advice is sought from work supervisor to ensure the work is coordinated effectively with others | ||||||||
Element: Tools, testing devices and materials needed to carry out the electronic work are obtained and checked for correct operation and safety | ||||||||
Element: Solve fundamental problems in electronic communications system |
| |||||||
Element: Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace safety procedures | ||||||||
Element: Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Fundamental of communication system characteristics, components and transmission media is applied to resolving system problem/s | ||||||||
Element: Logical approaches are used to solve system problems from measured and calculated values as they apply to communication system configuration | ||||||||
Element: Unplanned situations are dealt with safely and with the approval of authorised person/s in accordance with workplace procedures in a manner that minimises risk to personnel and equipment | ||||||||
Element: Electronic problems are resolved without unnecessary damage to apparatus, circuits, the surrounding environment or services using sustainable energy practices | ||||||||
Element: Complete electronic work and document problem-solving activities |
| |||||||
Element: Worksite is cleaned and made safe in accordance with workplace procedures | ||||||||
Element: Reports are written outlining electronic system problem and justifying solutions used |