Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEEEL0001 Mapping and Delivery Guide
Apply compliance requirements to all aspects of electrical work

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEEEL0001 - Apply compliance requirements to all aspects of electrical work
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to apply compliance requirements to aspects of electrical work.It includes applying work health and safety (WHS)/occupational health and safety (OHS) requirements for preparing and inspecting electrical installations, and documenting activities and outcomes.This unit is intended for electrical licence holders who, according to the regulatory authority, have exhibited recalcitrance in their licence and/or WHS/OHS duty of care obligations.Competency in this unit can only be gained by persons who hold a current 'Unrestricted Electrician's Licence' issued in an Australian state or territory.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in suitable workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated suitable workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or simulations

relevant and appropriate materials, tools, facilities, equipment and personal protective equipment (PPE) currently used in industry

applicable documentation, including workplace procedures, equipment specifications, regulations, relevant industry standards, codes of practice and operation manuals.
Prerequisites/co-requisites
Competency Field Electrical
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Apply risk management requirements
  • Access to worksite is obtained in accordance with WHS/OHS requirements and relevant industry standards
       
Element: WHS/OHS risk control measures and workplace procedures given in safe work method statements (SWMS) and/or job safety analysis (JSA) documents are identified, followed and applied
       
Element: WHS/OHS hazards not previously identified are noted, risk assessed and risk control measures implemented in accordance with WHS/OHS procedures
       
Element: Risk and control measures for a new or changed hazard are documented in accordance with WHS/OHS requirements and workplace procedures
       
Element: Hazards created by other site activities are referred to appropriate person/s in accordance with workplace procedures
       
Element: WHS/OHS documents for incidents reports are maintained in accordance with workplace procedures and relevant industry standards
       
Element: Ensure electrical installations are safe for use
  • WHS/OHS risk control measures and procedures for carrying out the work are followed
       
Element: Need to test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
       
Element: Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
       
Element: Compliance of an installation is confirmed in accordance with relevant industry standards
       
Element: Document risk management activities
  • Non-compliance defects are identified and reported in accordance with workplace procedures
       
Element: Recommendations for rectifying defects are made in accordance with workplace procedures
       
Element: Documentation is completed in accordance with workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least one occasion and include:

following requirements to gain entry to a worksite

following work health and safety (WHS)/occupational health and safety (OHS) compliance requirements, control measures and procedures

identifying new and changed hazards, assigning a realist level of risk and establishing appropriate control measures

maintaining WHS/OHS documents and incidents and issues reports in accordance with requirements

determining whether an electrical installation is compliant in accordance with regulations

documenting installation compliance verification activities and outcomes

dealing with unplanned events

ensuring electrical installations are safe for use.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

electrical work compliance requirements of electrical work testing and verification, including:

WHS/OHS requirements encompassing:

legislated regulations

responsibilities of employers and employees

hazards and risks and control measures

safe work method statements (SWMS)/job safety analysis (JSA)

identifying potential workplace hazards and establishing control measures

maintaining WHS/OHS documents

electrical installation safety requirements encompassing:

legislated regulations

visual inspecting of installations

testing installations

documentation

safety requirements, including local service rules and application of current editions AS/NZS 3000 following AS/NZS 3017 Electrical installations - Verification guidelines

problem-solving techniques

relevant industry standards

relevant manufacturer specifications

relevant quality workplace procedures

relevant testing devices.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Access to worksite is obtained in accordance with WHS/OHS requirements and relevant industry standards 
 
 
 
 
 
WHS/OHS risk control measures and procedures for carrying out the work are followed 
 
 
 
Non-compliance defects are identified and reported in accordance with workplace procedures 
 
 

Forms

Assessment Cover Sheet

UEEEL0001 - Apply compliance requirements to all aspects of electrical work
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEEEL0001 - Apply compliance requirements to all aspects of electrical work

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: