Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEEEL0031 Mapping and Delivery Guide
Conduct compliance inspection of special LV electrical installations
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEEEL0031 - Conduct compliance inspection of special LV electrical installations | |
---|---|---|---|---|
Description | ||||
Employability Skills | ||||
Learning Outcomes and Application | This unit involves the skills and knowledge required to conduct compliance inspection of special low voltage (LV) electrical installations.It includes preparing and conducting compliance inspection, and actioning and reporting on inspection findings.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).Competency development activities in this unit are subject to regulations directly related to licensing.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations. | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
|
|||
Prerequisites/co-requisites | ||||
Competency Field | Electrical |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to conduct compliance inspection |
| |||||||
Element: WHS/OHS risk control measures and procedures in preparation for the work are followed | ||||||||
Element: WHS/OHS hazards not previously identified are noted and risk control measures are implemented in consultation with appropriate person/s | ||||||||
Element: Installation documentation and/or relevant industry standard for the installation is reviewed and applied | ||||||||
Element: Appropriate person/s is consulted to ensure the work is coordinated effectively with others | ||||||||
Element: Tools, equipment and testing devices to verify compliance are obtained in accordance with workplace procedures and checked for operation and safety | ||||||||
Element: Conduct compliance inspection |
| |||||||
Element: Need to inspect, test and measure live electrical work is determined in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Inspection of the mains and main switchboard is conducted for compliance of protection metering earthing circuit arrangements and markings in accordance with relevant industry standard | ||||||||
Element: Inspection of circuits is conducted for compliance of the installed wiring accessories switchgear/control gear and current-using devices in accordance with relevant industry standard | ||||||||
Element: Electrical equipment complies with relevant safety requirements and industry standards and is obtained from appropriate person/s | ||||||||
Element: Inspection is conducted to verify compliance of earthing insulation polarity circuit connections and operation of residual current devices (RCDs) in accordance with relevant industry standards | ||||||||
Element: Fault-loop impedance is determined as being sufficiently low by testing calculation and compliance with arrangement of the installation in accordance with relevant industry standards | ||||||||
Element: Unplanned events are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment | ||||||||
Element: Act and report on inspection findings |
| |||||||
Element: Non-compliance defects are identified and documented in accordance with relevant industry standards and workplace procedures | ||||||||
Element: Actions are taken for non-compliance defects within the scope of inspection responsibilities in accordance with workplace procedures and relevant industry standards | ||||||||
Element: Inspection report is completed and issued to appropriate person/s in accordance with workplace procedures and relevant industry standards |