Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEEEL0054 Mapping and Delivery Guide
Maintain operation of electrical mining equipment and systems
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEEEL0054 - Maintain operation of electrical mining equipment and systems | |
---|---|---|---|---|
Description | ||||
Employability Skills | ||||
Learning Outcomes and Application | This unit involves the skills and knowledge required to service electrical systems and equipment in underground and open-cut mines.It includes working safely, planning to maintain mining electrical systems and equipment, applying logical fault diagnosis procedures, following fault rectification workplace procedures and maintaining the service documentation.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations. | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
|
|||
Prerequisites/co-requisites | ||||
Competency Field | Electrical |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Plan to maintain electrical mining equipment |
| |||||||
Element: WHS/OHS risk control measures and workplace procedures in preparation for work are followed | ||||||||
Element: Scope of electrical work to be undertaken is determined from fault/breakdown reports and/or discussions with appropriate person/s | ||||||||
Element: Advice is sought from work supervisor to ensure work is coordinated effectively with others | ||||||||
Element: Sources of materials required for work are determined in accordance with workplace procedures | ||||||||
Element: Tools, equipment and testing devices needed to locate faults are obtained in accordance with workplace procedures and checked for correct operation and safety | ||||||||
Element: Maintain operation of electrical mining equipment |
| |||||||
Element: Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures | ||||||||
Element: Safety hazards resulting from fault/s or breakdown are documented on job safety assessments, risks assessed and control measures implemented in consultation with appropriate person/s and workplace procedures | ||||||||
Element: Fault-finding analysis is approached methodically using measured and calculated values of electrical circuit/apparatus parameters | ||||||||
Element: Electrical circuit/apparatus components are dismantled, as required, and parts stored to protect against loss or damage | ||||||||
Element: Faulty circuits/components are rechecked and fault status identified | ||||||||
Element: Materials/replacement parts required to rectify fault/s are sourced and obtained in accordance with workplace procedures | ||||||||
Element: Effectiveness of repair/s is tested in accordance with workplace procedures | ||||||||
Element: Electrical apparatus and circuits are inspected, reassembled, tested and prepared for return to service | ||||||||
Element: Unplanned situations are responded to safely and in accordance with workplace procedures with the approval of an authorised person/s | ||||||||
Element: Fault-finding and repair activities are carried out without damage to apparatus, circuits, the surrounding environment or services using sustainable energy practices | ||||||||
Element: Complete work and report on operation of electrical mining equipment |
| |||||||
Element: Reusable, faulty or worn components are tagged and despatched for repair in accordance with workplace procedures | ||||||||
Element: Maintenance work activities are documented in accordance with workplace procedures |