Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEEHA0031 Mapping and Delivery Guide
Supervise repair and overhaul of explosion-protected equipment type flameproof (Ex d)

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEEHA0031 - Supervise repair and overhaul of explosion-protected equipment type flameproof (Ex d)
Description
Employability Skills
Learning Outcomes and Application
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for repair and overhaul of equipment
  • Repair facility quality assurance system is obtained, interpreted and applied
       
Element: Instructions on repair and/or overhaul are received and expected outcomes of the work confirmed with the user
       
Element: All documentation relevant to the equipment repair and/or overhaul is obtained, interpreted and applied
       
Element: Where adequate relevant equipment information is not available, steps taken to source such information are documented
       
Element: Agreement is made with the user for the repair and/or overhaul of Group II and III equipment to be completed in accordance with standards where adequate documentation is not available
       
Element: The common requirements for equipment repair and overhaul are ascertained from relevant standards and regulations and applied to the preparation for the work only where this arrangement is permitted
       
Element: Establish the level of repair/overhaul required
  • Safe work methods are applied to measurements, tests and inspections carried out on the equipment to establish the extent of repair and/or overhaul
       
Element: The requirements, evaluation procedures and parameters of the type of equipment to be repaired and/or overhauled are ascertained from relevant standards and regulations and applied to establishing the extent of the work
       
Element: Measurement devices and instruments are maintained and calibrated in accordance with recognised practices
       
Element: The extent of work to be completed is established from measurements, tolerances and evaluation procedures and their correspondence with equipment documentation and the requirements of standards
       
Element: Specifications and instructions for the repair and/or overhaul work are documented ensuring compliance with original documentation, standards and user instructions
       
Element: Arrange repair and overhaul work
  • Arrangements are made for the repair and overhaul work to be completed in accordance with the specification and instructions, by an operative with the competencies specified in standards
       
Element: A copy of repair and/or overhaul specifications and instructions is provided to the operative responsible for completing the work
       
Element: Verify that equipment complies with original certification
  • Scope and level of testing and measurements required to verify that overhauled and/or repaired equipment complies with original certification is determined in accordance with manufacturers’ documentation and standards requirements as applicable to an equipment group
       
Element: Verification tests and measurements are arranged, conducted and documented in accordance with equipment type standards and instruction manuals
       
Element: Results of verification tests and measurements are reviewed to ascertain whether they comply with original equipment documentation and/or agreement with the user
       
Element: Actions are taken to rectify any non-compliance identified through the verification tests and measurements
       
Element: Document repair and overhaul work
  • Equipment is marked to show it has been repaired and/or overhauled in accordance with standards and applicable to an equipment group
       
Element: Job report of the completed repair and/or overhaul is prepared in accordance with standards and submitted to the user for inclusion in their verification dossier
       
Element: Repair facility records are updated to include the job record in accordance with standards and quality system
       
Element: The steps taken to obtain the certificate documents where adequate equipment documentation was not available is included in the repair facility records
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Repair facility quality assurance system is obtained, interpreted and applied 
 
 
 
 
 
Safe work methods are applied to measurements, tests and inspections carried out on the equipment to establish the extent of repair and/or overhaul 
 
 
 
 
Arrangements are made for the repair and overhaul work to be completed in accordance with the specification and instructions, by an operative with the competencies specified in standards 
 
Scope and level of testing and measurements required to verify that overhauled and/or repaired equipment complies with original certification is determined in accordance with manufacturers’ documentation and standards requirements as applicable to an equipment group 
 
 
 
Equipment is marked to show it has been repaired and/or overhauled in accordance with standards and applicable to an equipment group 
 
 
 

Forms

Assessment Cover Sheet

UEEHA0031 - Supervise repair and overhaul of explosion-protected equipment type flameproof (Ex d)
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEEHA0031 - Supervise repair and overhaul of explosion-protected equipment type flameproof (Ex d)

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: