Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEEHA0033 Mapping and Delivery Guide
Supervise repair and overhaul of explosion-protected equipment type intrinsically safe (Ex i)
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEEHA0033 - Supervise repair and overhaul of explosion-protected equipment type intrinsically safe (Ex i) |
---|---|---|---|
Description | |||
Employability Skills | |||
Learning Outcomes and Application | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | |||
Competency Field |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare for repair and overhaul of equipment |
| |||||||
Element: Instructions on repair and/or overhaul are received and expected outcomes of the work confirmed with the user | ||||||||
Element: All documentation relevant to the equipment repair and/or overhaul is obtained, interpreted and applied | ||||||||
Element: Where adequate relevant equipment information is not available, steps taken to source such information are documented | ||||||||
Element: Agreement is made with the user for the repair and/or overhaul of Group II and III equipment to be completed in accordance with standards where adequate documentation is not available | ||||||||
Element: The common requirements for equipment repair and overhaul are ascertained from relevant standards and regulations and applied to the preparation for the work only where this arrangement is permitted | ||||||||
Element: Establish the level of repair/ overhaul required |
| |||||||
Element: The requirements, evaluation procedures and parameters of the type of equipment to be repaired and/or overhauled are ascertained from relevant standards and regulations and applied to establishing the extent of the work | ||||||||
Element: Measurement devices and instruments are maintained and calibrated in accordance with recognised practices | ||||||||
Element: The extent of work to be completed is established from measurements, tolerances and evaluation procedures and their correspondence with equipment documentation and the requirements of standards | ||||||||
Element: Specifications and instructions for the repair and/or overhaul work are documented ensuring compliance with original documentation, standards and user instructions | ||||||||
Element: Arrange repair and overhaul work |
| |||||||
Element: A copy of repair and/or overhaul specifications and instructions is provided to the operative responsible for completing the work | ||||||||
Element: Verify that equipment complies with original certification |
| |||||||
Element: Verification tests and measurements are arranged, conducted and documented in accordance with equipment type standards and instruction manuals | ||||||||
Element: Results of verification tests and measurements are reviewed to ascertain whether they comply with original equipment documentation and/or agreement with the user | ||||||||
Element: Actions are taken to rectify any non-compliance identified through the verification tests and measurements | ||||||||
Element: Document repair and overhaul work |
| |||||||
Element: Job report of the completed repair and/or overhaul is prepared in accordance with standards and submitted to the user for inclusion in their verification dossier | ||||||||
Element: Repair facility records are updated to include the job record in accordance with standards and quality system | ||||||||
Element: The steps taken to obtain the certificate documents where adequate equipment documentation was not available is included in the repair facility records |