Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEEIC0031 Mapping and Delivery Guide
Set up and configure human-machine interface (HMI) and industrial networks
Version 1.0
Issue Date: May 2024
Qualification | - |
Unit of Competency | UEEIC0031 - Set up and configure human-machine interface (HMI) and industrial networks | |
---|---|---|---|---|
Description | ||||
Employability Skills | ||||
Learning Outcomes and Application | This unit involves the skills and knowledge required to set up and configure human-machine interface (HMI) and industrial networks.It includes preparing the process control schemes that meet safety and process requirements, and selecting control equipment and interconnecting cabling and tubing/piping based on calculated and measured arrangements.No licensing, legislative or certification requirements apply to this unit at the time of publication. | |||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
|
|||
Prerequisites/co-requisites | ||||
Competency Field | Instrumentation & Control |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to setup and configure HMI and industrial networks |
| |||||||
Element: Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for the control system are identified, obtained and applied | ||||||||
Element: Control apparatus and interconnecting components required for control system are arranged and determined from job specifications and in accordance with process control systems and relevant industry standards | ||||||||
Element: Setup and configure HMI and industrial networks |
| |||||||
Element: Control apparatus is selected in accordance with compatibility with process parameters, control requirements and relevant environmental conditions | ||||||||
Element: Specified apparatus ingress protection (IP) rating is sought from manufacturer specifications, as required | ||||||||
Element: Control valves are selected in accordance with percentage travel flow and loop-and-process characteristics, optimum size, range ability, ability to cope with process pressures and relevant environmental conditions | ||||||||
Element: Select interconnecting cabling and tubing/piping |
| |||||||
Element: Tubing/piping and accessories are sized to capacity and pressure requirements in accordance with job specifications | ||||||||
Element: Route lengths of cable and tubing/piping are determined from site drawings in accordance with job specifications | ||||||||
Element: Process control system is arranged and specifications for all selected items are documented in accordance with workplace procedures and forwarded to relevant person/s |