Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEENEEC029B Mapping and Delivery Guide
Participate in explosion-protected equipment overhaul work and competency development activities

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency UEENEEC029B - Participate in explosion-protected equipment overhaul work and competency development activities
Description 1)1.1) This unit covers the application of industry/enterprise policies in actively participating in work activities and in one's own competency development. It complies with established industry/enterprise procedures regarding how work is conducted, understanding responsibilities and obligations under competency development plan, following activities for developing competency, self-monitoring competency development and meeting trainee obligations for periodic reporting of competency development activities.
Employability Skills 3)The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.
Learning Outcomes and Application 4) This unit applies to a recognised development program that leads to the acquisition of a formal award at AQF level 3 or higher.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Prerequisite Unit(s) 2) 2.1) CompetenciesThere are no prerequisite competencies for this unit.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Comply with explosion-protected equipment overhaul industry/enterprise work policies and procedures
  • Industry/enterprise policies and procedures for all work activities are identified and obtained.
  • Clarification on how particular work is to be carried out and the procedures involved is sought from the immediate supervisor/appropriate person.
  • Unexpected situations are dealt with safely and in accordance with industry/enterprise policies and procedures, and with the approval of an authorised person.
       
Element: Monitor and respond to a personal competency development plan.
  • All aspects of the competency development plan are confirmed in consultation with appropriate persons.
  • All components of the competency development plan are followed diligently.
  • Opportunities to practise skills and apply knowledge relative to a particular competency are pursued.
  • Assistance is sought from appropriate persons to overcome difficulties in developing skills and applying knowledge relevant to a particular competency.
  • Progress in competency development is self-monitored against the competency development plan and industry/enterprise policies and procedures.
  • Modifications to the personal competency development plan are made in consultation with appropriate persons.
  • Obligations are met for periodic and timely reporting of competency development activities.
  • Periodic competency development activities report is validated by an appropriate person in accordance with industry/enterprise policies and procedures.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

9) This provides essential advice for assessment of the unit. It must be read in conjunction with the performance criteria and the range statement of the unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be 'rich' in nature to minimise error in judgment.

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites must be met.

Evidence for competence in this unit shall be considered holistically. Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices, including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit. It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

Participate in explosion-protected equipment overhaul work and competency development activities as described in 8) including:

A

Identifying and confirming the context, requirements and responsibilities of the competency development (training) plan to be met

B

Identifying and confirming the critical industry, enterprise and regulatory policies, procedures and context applicable to all work activities

C

Identifying and confirming the applicable training practices, requirements, administration, costs and support service policies and procedures provided by the RTO to all vocational and technical education activities

D

Seeking clarification of how particular work is to be carried out and the procedures involved

E

Dealing with unexpected situations in accordance with industry/enterprise policies and procedures, and with the approval of an authorised person

F

Reporting periodically the competency development activities in accordance with requirements

G

Periodically reviewing progress of the competency development activities in accordance with requirements

H

Pursuing strategies to develop opportunities for gaining the range of workplace experiences and exposure

I

Progressing successfully against periodic or staged evaluative performance events according to requirements

G

Seeking assistance to overcome difficulties in developing competency

K

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed in this unit.

These should be used in the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment it must ensure that the conditions for assessment are authentic and as far as possible reproduce and replicate the workplace and is consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to participating in development and following a personal competency development plan.

Method of assessment

9.4)

This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

Competency in this unit shall be assessed concurrently with the all core and nominated elective units in a qualification.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

7) This describes the essential skills and knowledge and their level, required for this unit.

Evidence must show that knowledge has been acquired of safe working practices and participating in development and following a personal competency development plan.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

2.2.45

Responsibilities under a competency development plan

2.2.46

Methods of monitoring and reporting competency development activities

2.2.48

Enterprise work activities policies and procedures

8) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit must be demonstrated following the completion of a range of performance process activities that contribute to assisting in the evaluation of progress towards the development of competency. The unit applies to those engaged in employment-based programs covered by an approved contract of training under a relevant State/Territory training Act seeking to complete the qualification. Incorporated therein is the requirement for deploying an approved competency development (training) plan.

The Plan specifies the units which are to be attained to complete the qualification. This unit is a core requirement for the completion of the qualification. It encompasses the processes required to participate in the development of competence by an apprentice/learner in the industry and in particular the activities associated with performance in the workplace and in vocational and technical education. It includes but is not limited to recognising and participating in:

The competency development plan:

Context of the plan

State/Territory regulatory requirements (Acts/Regulations)

Competency development (training) contracts

Competency development (nominal training) period

Purpose of competency development (training) plans

Process in developing competency development (training) plans

Parties involved in the competency development (training) plan

Responsibilities of Parties:

RTO responsibilities

Role of State Training Authority (STA)

Employer responsibilities

Employee/Learner responsibilities

Context of responsible parties:

Industry customs, work practices

Industry bodies – employer and employee representatives

Regulatory bodies, including licensing/registration, OHS, IR, training authorities – apprentice/trainee regulation

Vocational and technical education system – AQF, credentials, AQTF

RTO training practices, requirements, administration, costs, and support services

Workplace practice and exposure:

Timely reporting of workplace exposures and practice

Supervisor confirmation of workplace exposures and practices in a structured workplace report

Workplace evidence reporting:

Unit of work

Elements and performance of work

Range of items exposed to and practised on

Level of supervision received

Period of exposure

Workplace evidence validation:

Currency of evidence

Authenticity of evidence

Sufficiency of evidence

Workplace evidence reporting review:

Contribution towards progressive development for the qualification

Competency standard unit progressive reporting

Regular review of progress report

Timing of periodic monitoring/evaluation

Procedures for monitoring and analysing progress

Procedures for responding to anomalies in competency development

Procedures for liaison with the workplace supervisor

Periodic evaluation of competency development (training) progress:

Stages of progress that are to be met in developing competent performance

Evaluation of progress against requisite stages of development towards competent performance

Implementation of remedial measures

Periodic progress report formally confirmed to parties

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Industry/enterprise policies and procedures for all work activities are identified and obtained. 
Clarification on how particular work is to be carried out and the procedures involved is sought from the immediate supervisor/appropriate person. 
Unexpected situations are dealt with safely and in accordance with industry/enterprise policies and procedures, and with the approval of an authorised person. 
All aspects of the competency development plan are confirmed in consultation with appropriate persons. 
All components of the competency development plan are followed diligently. 
Opportunities to practise skills and apply knowledge relative to a particular competency are pursued. 
Assistance is sought from appropriate persons to overcome difficulties in developing skills and applying knowledge relevant to a particular competency. 
Progress in competency development is self-monitored against the competency development plan and industry/enterprise policies and procedures. 
Modifications to the personal competency development plan are made in consultation with appropriate persons. 
Obligations are met for periodic and timely reporting of competency development activities. 
Periodic competency development activities report is validated by an appropriate person in accordance with industry/enterprise policies and procedures. 

Forms

Assessment Cover Sheet

UEENEEC029B - Participate in explosion-protected equipment overhaul work and competency development activities
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

UEENEEC029B - Participate in explosion-protected equipment overhaul work and competency development activities

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: