Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEENEEG021B Mapping and Delivery Guide
Verify compliance and functionality of special electrical installations
Version 1.0
Issue Date: April 2024
Qualification | - |
Unit of Competency | UEENEEG021B - Verify compliance and functionality of special electrical installations |
---|---|---|---|
Description | 1) 1.1) This unit covers testing and visual inspection for verifying that an electrical installation in caravan parks, construction and demolition sites, marinas, medical treatment areas, moveable premises and HV installation in consumer's premises are safe and comply with requirements. The unit encompasses procedures for safely conducting mandatory and optional tests, conducting visual inspections, identifying non-compliance defects and mandatory reporting requirements.Note:Competency in verifying compliance of installations for hazardous areas is covered by "M" units: | ||
Employability Skills | 3)This unit contains Employability SkillsThe required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements. | ||
Learning Outcomes and Application | 4) This unit is intended to augment previously acquired competencies. It is suitable for employment-based programs under an approved contract of training. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | Prerequisite Unit(s) 2) 2.1) CompetenciesGranting competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed.UEENEEG005B Verify compliance and functionality of general electrical installationsFor the full prerequisite chain details for this unit please refer to Table 2 in Volume 1, Part 2 | ||
Competency Field |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to inspect and test an electrical installation. |
| |||||||
Element: Visually inspect the installation. |
| |||||||
Element: Conduct safety testing. |
| |||||||
Element: Earthing conductor resistance is sufficiently low | ||||||||
Element: Insulation resistance is sufficiently high | ||||||||
Element: Polarities are correct | ||||||||
Element: Circuit connections are correct | ||||||||
Element: Other tests required by a Standard |
| |||||||
Element: Fault-loop impedance is sufficiently low | ||||||||
Element: Residual current devices operate as intended. | ||||||||
Element: Report inspection and test findings. |
|