Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners
UEENEEI148A Mapping and Delivery Guide
Solve problems in single phase electronic power control circuits
Version 1.0
Issue Date: April 2024
Qualification | - |
Unit of Competency | UEENEEI148A - Solve problems in single phase electronic power control circuits |
---|---|---|---|
Description | 1)Scope:1.1) DescriptorThis unit covers solving problems with electronic aspects of single phase power control devices and circuits. The unit encompasses safe working practices, interpreting diagrams, applying knowledge of electronic power control devices and their application, using effective problem solving techniques, safety and functional testing and reporting work activities and outcomes.Note.Typical single phase electronic power control problems are those encountered in meeting performance requirements and compliance standards, revising control operating parameters and dealing with control malfunctions. | ||
Employability Skills | 5) This unit contains Employability SkillsThe required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements. | ||
Learning Outcomes and Application | 2)This unit is intended to apply to any recognised development program that leads to the acquisition of a formal award at AQF level 4 or higher. | ||
Duration and Setting | X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting. |
||
Prerequisites/co-requisites | Prerequisite Unit(s)4) Competencies4.1)Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed.Where pre-requisite pathways have been identified. All competencies in the Common Unit Group must be have been completed plus all the competencies in one (1) of the identified Pathway Unit Group(s):ElectrotechnologyElectronics and CommunicationsElectricalInstrumentation and controlCommon Unit GroupUnit CodeUnit TitleUEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplaceUEENEEE104A Solve problems in d.c. CircuitsElectrotechnology Pathway Group Unit CodeUnit TitleUEENEEH102A Repair basic electronic apparatus faults by replacement of componentsUEENEEH139A Troubleshoot basic amplifier circuitsUEENEEH169A Solve problems in basic electronic circuitsElectronics and Communications Pathway GroupUnit CodeUnit TitleUEENEEH102A Repair basic electronic apparatus faults by replacement of componentsUEENEEH114A Solve problems in frequency dependent circuitsUEENEEH139A Troubleshoot basic amplifier circuitsElectrical Pathway GroupUnit CodeUnit TitleUEENEEE105A Fix and secure electrotechnology equipmentUEENEEE107A Use drawings, diagrams, schedules, standards, codes and specificationsUEENEEG006A Solve problems in single and three phase low voltage machinesUEENEEG033A Solve problems in single and three phase electrical apparatus and circuitsUEENEEG063A Arrange circuits, control and protection for general electrical installationsUEENEEG101A Solve problems in electromagnetic devices and related circuitsUEENEEG102A Solve problems in low voltage a.c. circuitsUEENEEG106A Terminate cables, cords and accessories for low voltage circuitsInstrumentation and Control Pathway GroupUnit CodeUnit TitleUEENEEE107A Use drawings, diagrams, schedules, standards, codes and specificationsUEENEEE119A Solve problems in multiple path extra low voltage (ELV) a.c. circuitsUEENEEI101A Use instrumentation drawings, specification, standards and equipment manualsUEENEEI102A Solve problems in pressure measurement components and systemsUEENEEI103A Solve problems in density/level measurement components and systemsUEENEEI104A Solve problems in flow measurement components and systemsUEENEEI105A Solve problems in temperature measurement components and systemsUEENEEI106A Set up and adjust PID control loopsUEENEEI110A Set up and adjust advanced PID process control loopsUEENEEI112A Verify compliance and functionality of instrumentation and control installationsUEENEEI113A Setup and configure Human-Machine Interface (HMI) and industrial networksLiteracy and numeracy skills4.2) Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 ‘Literacy and Numeracy’Reading4Writing4Numeracy4 | ||
Competency Field |
Development and validation strategy and guide for assessors and learners | Student Learning Resources | Handouts Activities |
Slides PPT |
Assessment 1 | Assessment 2 | Assessment 3 | Assessment 4 | |
---|---|---|---|---|---|---|---|---|
Elements of Competency | Performance Criteria | |||||||
Element: Prepare to solve problems in single phase electronic power control systems. |
| |||||||
Element: Solve problems in single phase electronic power control systems. |
| |||||||
Element: Test and document solutions to single phase electronic power control. |
| |||||||
Element: Note: | ||||||||
Element: A license to practice in the workplace is required for work involving direct access to plant and equipment connected to installation wiring at voltages above 50 V a.c. or 120 V d.c. |