Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEENEEN020B Mapping and Delivery Guide
Install electrical power and control equipment for rail networks

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEENEEN020B - Install electrical power and control equipment for rail networks
Description 1) 1.1) This unit covers installation of electrical power and control equipment. It encompasses working safely and to installation/maintenance standards, matching equipment with that specified for a given location, terminating cables and connecting wiring, compliance and functional testing and completing the necessary installation documentation.
Employability Skills 3)This unit contains Employability SkillsThe required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.
Learning Outcomes and Application 4) This unit shall apply to qualifications in installation and maintenance of rail signalling electrical power and control systems.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Prerequisite Unit(s) 2) 2.1) CompetenciesRelevant work place requirements in 'Work site protection' have been acquired.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to install electrical power and/or control equipment.
  • OHS procedures for a given work area are identified, obtained and understood.
  • Established OHS risk control measures and procedures are followed in preparation for the work.
  • Safety hazards which have not previously been identified are noted, and established risk control measures are implemented.
  • Nature of the work and location of electrical power and/or control equipment is determined by site inspection and from job instructions, specifications and/or diagrams.
  • Materials needed for the installation work are obtained in accordance with established procedures and checked against job requirements.
  • Tools, equipment and testing devices needed to install electrical power and/or control equipment are obtained in accordance with established procedures and checked for correct operation and safety.
       
Element: Install electrical power and/or control equipment
  • OHS risk control measures and procedures for carrying out the work are followed.
  • Where applicable on-track safety requirements are complied with to enterprise standards
  • Power and/or control equipment is installed to comply with technical standards and job specifications and requirements.
  • Wiring is run and cables terminated to comply with technical standards and job specifications and requirements.
  • Tests are conducted to ensure installed electrical power and/or equipment comply with specifications and functions as intended.
  • Established methods for dealing with unexpected situations are discussed with appropriate person(s) and documented.
  • Installation of electrical power and/or control equipment is carried out efficiently without waste of materials or damage to apparatus and the surrounding environment or services and using sustainable energy practices.
       
Element: Test electrical power and/or control equipment
  • OHS risk control measures and procedures for carrying out the work are followed.
  • Correct functioning of equipment is established by reference to manuals, system specifications and commissioning data.
  • Faults are identified by reference to appropriate technical information and applying knowledge of power operated signalling equipment and logical fault finding techniques.
  • Faulty, worn, damaged or insecure components are replaced, repaired or secured in accordance with manufacturer specifications and enterprise requirements.
  • Tests are conducted to ensure electrical power and/or control equipment comply with specifications and functions as intended.
  • Established methods for dealing with unexpected situations are discussed with appropriate person(s) and documented.
       
Element: Complete installation of electrical power and/or control equipment.
  • OHS work completion risk control measures and procedures are followed.
  • Work site is cleaned and made safe in accordance with established procedures.
  • Work completion is documented and appropriate person(s) notified in accordance with established procedures.
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

9) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package.

The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

9.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it must include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. In some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accordance with industry and regulatory policy.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety issues inherent in working with electricity, electrical equipment, gas or any other hazardous substance/material present a challenge for those determining competence. Sources of evidence need to be 'rich' in nature to minimise error in judgment.

Activities associated with normal everyday work influence decisions about how/how much the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

9.2)

Before the critical aspects of evidence are considered all prerequisites must be met.

Evidence for competence in this unit shall be considered holistically. Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07'. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit. It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements.

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below:

Install electrical power and control equipment for rail networks as described in 8) and including:

A

Interpreting specifications and circuit diagrams correctly

B

Maintaining, repairing and installing power supplies and control equipment correctly

C

Using appropriate diagnostic and fault finding techniques

D

Using tools and test instruments correctly

E

Following relevant codes of practice, procedures and requirements

F

Completing relevant records and documentation

G

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Note:
Successful completion of relevant vendor training may be used to contribute to evidence on which competency is deemed. In these cases the alignment of outcomes of vendor training with performance criteria and critical aspects of evidence shall be clearly identified.

Context of and specific resources for assessment

9.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this unit.

These should be used in the formal learning/assessment environment.

Note:

Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to installing electrical power and control equipment for rail networks.

Method of assessment

9.4)

This unit shall be assessed by methods given in Volume 1, Part 3 'Assessment Guidelines'.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires assessment in a structured environment which is intended primarily for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

9.5)

There are no concurrent assessment recommendations for this unit.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

7) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices and installing electrical power and control equipment for rail networks.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies.

The extent of the essential knowledge and associated skills (EKAS) required is given in Volume 2 - Part 2.2 EKAS. It forms an integral part of this unit.

2.2.2

Enterprise work activities records

2.4.16

Personal computers, engineering applications software basic

2.5.4

Technical standards, regulations and codes rail networks

2.5.10

Technical manuals and catalogues

2.9.3.2

Inverters

2.9.3.3

Electronic switching

2.9.11

Linear and switch mode power supplies

2.14.12

Rail signalling, power supplies

2.14.13

Rail signalling, electro-pneumatic equipment

2.14.14

Rail signalling, drawings and diagrams

2.14.15

Rail signalling, regulations and codes

2.18.1

Occupational Health and Safety principles

2.18.2

Electrical Safe working practices

2.18.5

Rail safe working practices

8) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit shall be demonstrated in relation to:

The relevant State or Territory codes of practice and safe working requirements

Equipment relevant to a particular rail network

Code of practice for Defined Interstate Rail Networks

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Section 2.1.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
OHS procedures for a given work area are identified, obtained and understood. 
Established OHS risk control measures and procedures are followed in preparation for the work. 
Safety hazards which have not previously been identified are noted, and established risk control measures are implemented. 
Nature of the work and location of electrical power and/or control equipment is determined by site inspection and from job instructions, specifications and/or diagrams. 
Materials needed for the installation work are obtained in accordance with established procedures and checked against job requirements. 
Tools, equipment and testing devices needed to install electrical power and/or control equipment are obtained in accordance with established procedures and checked for correct operation and safety. 
OHS risk control measures and procedures for carrying out the work are followed. 
Where applicable on-track safety requirements are complied with to enterprise standards 
Power and/or control equipment is installed to comply with technical standards and job specifications and requirements. 
Wiring is run and cables terminated to comply with technical standards and job specifications and requirements. 
Tests are conducted to ensure installed electrical power and/or equipment comply with specifications and functions as intended. 
Established methods for dealing with unexpected situations are discussed with appropriate person(s) and documented. 
Installation of electrical power and/or control equipment is carried out efficiently without waste of materials or damage to apparatus and the surrounding environment or services and using sustainable energy practices. 
OHS risk control measures and procedures for carrying out the work are followed. 
Correct functioning of equipment is established by reference to manuals, system specifications and commissioning data. 
Faults are identified by reference to appropriate technical information and applying knowledge of power operated signalling equipment and logical fault finding techniques. 
Faulty, worn, damaged or insecure components are replaced, repaired or secured in accordance with manufacturer specifications and enterprise requirements. 
Tests are conducted to ensure electrical power and/or control equipment comply with specifications and functions as intended. 
Established methods for dealing with unexpected situations are discussed with appropriate person(s) and documented. 
OHS work completion risk control measures and procedures are followed. 
Work site is cleaned and made safe in accordance with established procedures. 
Work completion is documented and appropriate person(s) notified in accordance with established procedures. 

Forms

Assessment Cover Sheet

UEENEEN020B - Install electrical power and control equipment for rail networks
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEENEEN020B - Install electrical power and control equipment for rail networks

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: