Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEERA0036 Mapping and Delivery Guide
Establish the basic operating conditions of vapour compression systems

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEERA0036 - Establish the basic operating conditions of vapour compression systems
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to determine operating conditions of vapour compression system.It includes working safely; determining refrigerant pressures and temperatures, and relevant air and water temperatures using measurement and calculation methods. It also includes working with the three states of matter at each point in the refrigeration cycle (liquid, vapour and liquid-vapour mixture).The skills and knowledgein this unit will be applied by refrigeration and air conditioning technicians during the commissioning, service and repair of refrigeration and air conditioning systems.To undertake this unit, the learner must have a Trainee Refrigerant Handling Licence as it includes work on refrigeration and air conditioning equipment that carries the risk of a fluorocarbon refrigerant being emitted.The skills and knowledge described in this unit require a national Refrigerant Handling Licence as it includes work on refrigeration and air conditioning equipment that carries the risk of a fluorocarbon refrigerant being emitted while decanting the refrigerant or manufacturing, installing, commissioning, servicing, maintaining or decommissioning refrigeration and air conditioning equipment.The skills and knowledge described in this unit may, in some jurisdictions, also require a licence or permit to practice in the workplace subject to regulations for undertaking refrigeration and air conditioning work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must hold credentials specified within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must satisfy the Principles of Assessment and Rules of Evidence and all regulatory requirements included within the Standards for Registered Training Organisations current at the time of assessment.

Assessment must occur in workplace operational situations where it is appropriate to do so; where this is not appropriate, assessment must occur in simulated workplace operational situations that replicate workplace conditions.

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Resources for assessment must include access to:

a range of relevant exercises, case studies and/or other simulations

relevant and appropriate materials, tools, equipment and personal protective equipment (PPE) currently used in industry

applicable documentation, including workplace procedures, industry standards, equipment specifications, regulations, codes of practice and operation manuals.
Prerequisites/co-requisites
Competency Field Refrigeration and air-conditioning
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to determine operating condition of vapour compression system
  • WHS/OHS hazards, risk control methods, relevant standards, codes and legislation are obtained and applied in accordance with workplace procedures
       
Element: Safety hazards which have not previously been identified are assessed, reported and advice on risk control measures is sought from supervisor
       
Element: System design operating conditions are obtained from documentation or supervisor to determine scope of work to be undertaken
       
Element: Advice is sought from the supervisor to ensure work is coordinated effectively with others
       
Element: Materials required for the work are identified and obtained in accordance with workplace procedures
       
Element: Tools, equipment and testing devices needed to determine operating conditions are obtained and checked for correct operation and safety in accordance with workplace procedures
       
Element: Determine operating condition of vapour compression system
  • System operating conditions, including refrigerant pressures and temperatures and ambient temperatures, are measured in accordance with job requirements and workplace safety procedures
       
Element: Compression system is checked and isolated in accordance with workplace procedures
       
Element: Actual and specified range of operating conditions are determined from measured and calculated values as they apply to vapour compression system in accordance with workplace procedures
       
Element: Methods for dealing with unplanned situations/events are discussed with appropriate person/s and documented
       
Element: Unplanned events are dealt with safely and with the approval of a relevant person/s
       
Element: Operating conditions for vapour compression system are determined without damage to apparatus, circuits, the surrounding environment or services using relevant workplace sustainable energy practices in accordance with workplace procedures
       
Element: Complete work and report
  • Worksite and equipment are cleaned and made safe in accordance with workplace procedures
       
Element: Operating conditions are documented, including identification of any parameter that is not within the specified range for the vapour compression system, in accordance with workplace procedures
       
Element: Supervisor is notified of completion of work in accordance with workplace procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work, health and safety (WHS)/occupational health and safety (OHS) requirements, including using risk control measures

applying safe working practices and relevant industry standards, codes of practice and regulations

applying sustainable energy principles and practices

completing documentation and reporting requirements

dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

determining operating conditions of vapour compression system

documenting operating conditions

identifying conditions of a refrigerant at various locations in the vapour compression system

measuring and calculating actual and specified range of operating condition values, including recording measurements

selecting and using appropriate measuring devices correctly

using calculation methods accurately.

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

operating condition of vapour compression systems, including:

basic vapour compression systems operation and major components

common refrigerant metering devices, including capillary tube, thermostatic expansion (TX) valve, electronic expansion valve, function, types and applications

condenser function, types and applications

cooling tower function, types and applications

evaporator function, types and applications

hazards and risk control measures

heat and heat transfer

liquid receiver function, types and applications

pressure, scales and measurement devices

refrigerant conditions, including saturation, superheat, sub-cooling and pressure/temperature relationships

refrigerant leak detector types, applications, hazards and safe working practices, care and maintenance, and leak detection procedures

refrigeration compressor function, types and applications

refrigeration compressor oil function, types and applications

risk management principles and processes

safe handling techniques, including safety data sheets (SDS)/material safety data sheets (MSDS)

sensible and latent heat

service gauge manifold hose fitting, purging, pressure reading and removal

service gauge types, applications, care and maintenance, reading and calibration

sustainable energy principles and practices

system access fittings types, care, maintenance and connection

temperature and relative humidity, scales and measurement devices

vapour compression system operating conditions and pressure, temperature, state and enthalpy graphs

vapour compression system symbols/diagrams, design ambient and storage/space conditions

working safely with refrigeration vapour compression system relevant industry standards, codes of practice, regulations and WHS/OHS legislated requirements

relevant manufacturer specifications

relevant risk mitigation processes

relevant workplace documentation

relevant workplace policies and procedures.

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Determining operating conditions of vapour compression system must include at least the following:

measurement and basic calculation methods of vapour compression system whether used for refrigeration or air conditioning

suction and discharge pressures

ambient, evaporator and condensing temperatures

evaporator and condenser temperature difference

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
WHS/OHS hazards, risk control methods, relevant standards, codes and legislation are obtained and applied in accordance with workplace procedures 
 
 
 
 
 
System operating conditions, including refrigerant pressures and temperatures and ambient temperatures, are measured in accordance with job requirements and workplace safety procedures 
 
 
 
 
 
Worksite and equipment are cleaned and made safe in accordance with workplace procedures 
 
 

Forms

Assessment Cover Sheet

UEERA0036 - Establish the basic operating conditions of vapour compression systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEERA0036 - Establish the basic operating conditions of vapour compression systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: