Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEERS0023 Mapping and Delivery Guide
Inspect, test and certify rail power signal equipment

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEERS0023 - Inspect, test and certify rail power signal equipment
Description
Employability Skills
Learning Outcomes and Application
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to inspect, test and certify power signalling circuits, equipment and components
  • Work health and safety (WHS)/occupational health and safety (OHS) procedures for a given work area are identified, obtained and clarified
       
Element: Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures implemented in preparation for work
       
Element: Scope of inspection, testing and certifying is determined from job specifications, design drawings and regulatory requirements
       
Element: Appropriate safe working person/s is consulted to ensure work activity is coordinated effectively with others involved on the worksite
       
Element: Materials needed for testing and certifying of power signalling circuits, equipment and components are obtained in accordance with workplace procedures and checked against job specifications
       
Element: Tools, equipment and testing devices needed to inspect, test and certify power signalling circuits, equipment and components are obtained in accordance with workplace procedures and checked for correct operation and safety
       
Element: Test leads and bridges are identified and recorded to ensure that they are in accordance with the relevant standard
       
Element: Inspect, test and certify power signalling circuits, equipment and components
  • WHS/OHS risk control measures and procedures for carrying out work are followed
       
Element: On-track safe working requirements are identified and applied in accordance with workplace procedures and safety management system
       
Element: Inspection is carried out and circuits, equipment and components are checked to ensure they are in accordance with manufacturer and system specifications
       
Element: Inspecting, testing and certifying work includes installation, termination and operation of the signalling equipment; and checking indicators and signal system operation is completed in accordance with network requirements and relevant industry standards
       
Element: Methods for dealing with unplanned situations are selected on the basis of safety and specified work outcomes
       
Element: Inspection, testing, certifying and repairs are performed efficiently, without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
       
Element: Straps and bridges are used in accordance with the relevant standard and with the appropriate authority
       
Element: System and design faults are verified using relevant industry technical standards information, fault-finding and diagnostic techniques to identify faulty wiring equipment and components
       
Element: Identified irregularities and non-conforming wiring, equipment or components are documented and immediate follow-up action is initiated to ensure faults are rectified
       
Element: Faulty signalling equipment is replaced, adjusted and secured in accordance with manufacturer specifications and workplace procedures
       
Element: Complete testing and certifying work and reports
  • WHS/OHS work completion risk control measures and workplace procedures are followed
       
Element: Inspection and test results are documented in accordance with workplace procedures and faulty or replaced equipment is tagged and despatched to maintain equipment spares
       
Element: All straps and bridges are removed and compared against the initial record of leads, straps and bridges
       
Element: Incomplete testing is recorded and handed over to approved/ person/s for follow up
       
Element: Operational equipment is handed over to approved person/s in accordance with handover workplace procedures and final documentation is completed
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS)/occupational health and safety (OHS) procedures for a given work area are identified, obtained and clarified 
 
 
 
 
 
 
WHS/OHS risk control measures and procedures for carrying out work are followed 
 
 
 
 
 
 
 
 
 
WHS/OHS work completion risk control measures and workplace procedures are followed 
 
 
 
 

Forms

Assessment Cover Sheet

UEERS0023 - Inspect, test and certify rail power signal equipment
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEERS0023 - Inspect, test and certify rail power signal equipment

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: