Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG040 Mapping and Delivery Guide
Use a portable detector to locate a combustible gas escape

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEGNSG040 - Use a portable detector to locate a combustible gas escape
Description
Employability Skills
Learning Outcomes and Application
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to use portable gas detection device
  • Workplace safety, environmental and sustainable energy practices for the site are identified, obtained and understood
       
Element: Gas or vapour to be detected is determined from workplace documentation and/or in consultation with relevant person/s
       
Element: Gas detection devices are checked for calibration and response in accordance with manufacturer instructions and workplace procedures for use with the appropriate combustible gas
       
Element: Personal protective equipment (PPE) is obtained and checked for correct operation and safety in accordance with workplace procedures for use with the appropriate combustible gas
       
Element: Use gas detectors and pinpoint gas escapes
  • Workplace safety risk control measures and environmental policies and procedures are followed in accordance with workplace procedures
       
Element: Gas detection device is used in accordance with manufacturer instructions, workplace procedures and environmental conditions
       
Element: Gas properties and characteristics and environmental conditions are considered and monitored when determining probable areas that gases could accumulate
       
Element: Gas detector readings are interpreted correctly, converted to relevant percentage and recorded in accordance with regulations and workplace procedures
       
Element: Gas escapes are located and pinpointed in accordance with workplace procedures
       
Element: Required actions are determined and communicated to relevant person/s in accordance with workplace procedures
       
Element: Complete theuse of gas detector equipment and complete relevant documentation
  • Gas detection devices are purged, disassembled and stored in accordance with manufacturer instructions and workplace procedures
       
Element: Storage, use and calibration records of the gas detection device are maintained in accordance with workplace procedures
       
Element: Worksite is cleaned, reinstated and made safe in accordance with workplace procedures
       
Element: Incidents are reported and followed up as required in accordance with workplace procedures
       
Element: Relevant person/s is notified of work completion in accordance with workplace procedures
       
Element: Reports and documentation are completed accurately, and readings recorded and maintained in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.
Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Workplace safety, environmental and sustainable energy practices for the site are identified, obtained and understood 
 
 
 
Workplace safety risk control measures and environmental policies and procedures are followed in accordance with workplace procedures 
 
 
 
 
 
Gas detection devices are purged, disassembled and stored in accordance with manufacturer instructions and workplace procedures 
 
 
 
 
 

Forms

Assessment Cover Sheet

UEGNSG040 - Use a portable detector to locate a combustible gas escape
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEGNSG040 - Use a portable detector to locate a combustible gas escape

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: