Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG135 Mapping and Delivery Guide
Monitor and control gas odourisation

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEGNSG135 - Monitor and control gas odourisation
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to operate odourisation equipment, monitor and control the odourisation of gas, and confirm odourant levels are maintained within acceptable range in accordance with relevant legislation, industry standards, codes of practice and workplace procedures.It includes using appropriate tools, equipment and materials, ensuring relevant permits/authorisations are obtained, safely storing and handling required chemicals, operating gas odourisation equipment, monitoring gas odourisation and adjusting odourant levels, responding to spills and completing relevant documentation.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Cross Discipline Units
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to monitor and control odourisation of gas
  • Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied
       
Element: Job requirements and workplace procedures for the work are obtained and discussed with relevant person/s to confirm the work schedule
       
Element: Hazards are identified, WHS/OHS risks are assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
       
Element: Scope of work under the relevant work permit/notification is obtained and confirmed with relevant person/s in accordance with regulatory requirements and workplace procedures
       
Element: Materials, plans, diagrams, drawings and resources required for work are scheduled and obtained in accordance with workplace procedures
       
Element: Responsibilities for first aid and other emergency incidents at the work site are confirmed with relevant person/s in accordance with workplace procedures
       
Element: Relevant person/s are consulted to ensure the work is coordinated effectively with others in accordance with workplace procedures
       
Element: Person/s participating in gas odourisation are briefed and responsibilities confirmed in accordance with workplace procedures
       
Element: Site preparation, safety plan and work schedule are confirmed with relevant person/s in accordance with established procedures
       
Element: Monitor and control odourisation of gas
  • WHS/OHS risk control measures, schedule of work and workplace procedures for carrying out the work are followed
       
Element: Hazardous activities are conducted safely in accordance with job instructions, regulatory requirements and workplace procedures
       
Element: Gas odourisation equipment is operated and adjustments are made to odourant levels in accordance with workplace procedures
       
Element: Gas odourisation is monitored and controlled to the required standard without waste of materials or damage to the apparatus, circuits and the surrounding environment or services using sustainable energy principles
       
Element: Odourant is handled and transported in accordance with regulatory requirements and workplace procedures and potential hazards and safety risks monitored and control measures implemented
       
Element: Unplanned events and non-routine problems are referred to authorised person/s for directions in accordance with workplace procedures
       
Element: Odourant spill response and waste management emergency shutdown procedures are applied in the event of an odourant spill in the workplace
       
Element: Quality and safety checks are conducted in accordance with industry standards and workplace procedures
       
Element: Complete work and relevant documentation
  • Work site is cleaned up and made safe in accordance with workplace procedures
       
Element: Tools, equipment and any surplus resources and materials are cleaned, checked and securely stored in accordance with workplace procedures
       
Element: Relevant work permit/s are signed off and equipment returned to service in accordance with job and regulatory requirements and workplace procedures
       
Element: Relevant person/s are notified of the completion of the work in accordance with workplace procedures
       
Element: Work completion documentation is completed and provided to the appropriate person/s in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEG Gas Industry Training Package Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied 
 
 
 
 
 
 
 
 
WHS/OHS risk control measures, schedule of work and workplace procedures for carrying out the work are followed 
 
 
 
 
 
 
 
Work site is cleaned up and made safe in accordance with workplace procedures 
 
 
 
 

Forms

Assessment Cover Sheet

UEGNSG135 - Monitor and control gas odourisation
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEGNSG135 - Monitor and control gas odourisation

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: