Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG220 Mapping and Delivery Guide
Construct and lay polyethylene gas distribution mains

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEGNSG220 - Construct and lay polyethylene gas distribution mains
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to construct and lay polyethylene gas distribution mains. It includes constructing and laying polyethylene gas distribution mains using relevant tools and equipment, completing necessary documentation, and working safely in accordance with workplace procedures and relevant legislative, industry standard and code of practice requirements.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Gas Distribution
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to construct and lay polyethylene gas distribution mains
  • Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied
       
Element: Job requirements, including alignment of main and services and workplace procedures for the site, are discussed with relevant person/s to confirm the work schedule
       
Element: WHS/OHS, environmental and sustainable energy policies and procedures are obtained and applied in accordance with workplace procedures
       
Element: Hazards are identified, WHS/OHS risks are assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
       
Element: Scope of work and level of responsibility under the relevant work permit and/or notification is confirmed with relevant person/s in accordance with job requirements and workplace procedures
       
Element: Equipment, tools and personal protective equipment (PPE) required to carry out the work are identified, obtained and checked for correct operation and safety in accordance with workplace procedures
       
Element: Relevant person/s are consulted to ensure the work is coordinated effectively with others involved
       
Element: Materials, plans, diagrams, drawings and resources required to construct and lay polyethylene gas distribution mains are confirmed, scheduled and obtained in accordance with workplace procedures
       
Element: Safety and emergency response procedures and responsibilities for an incident are checked and confirmed with relevant person/s
       
Element: Third-party issues are referred to relevant person/s in accordance with workplace procedures
       
Element: Site preparation, safety plan and work schedule are confirmed with relevant person/s in accordance with workplace procedures
       
Element: Road signs, barriers and warning devices are positioned in accordance with job instructions, workplace procedures and traffic management plans
       
Element: Construct and lay polyethylene gas distribution mains
  • WHS/OHS and environmental risk control measures, schedule of work and workplace procedures for carrying out work are followed
       
Element: Materials, tools, equipment and measuring devices required for the work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
       
Element: Hazardous activities are conducted safely in accordance with WHS/OHS workplace procedures and job instructions
       
Element: Excavation bed/trench is prepared for laying of polyethylene gas pipe in accordance with relevant industry standards and workplace procedures
       
Element: Construction and laying of polyethylene gas distribution mains are conducted in accordance with relevant industry standards and workplace procedures
       
Element: Materials are prepared, aligned, constrained and jointed in accordance with relevant industry standards and workplace procedures
       
Element: Work is carried out to the required standard, without waste of materials or damage to apparatus, equipment, and the surrounding environment or services using sustainable energy principles
       
Element: WHS/OHS risks, incidents and accidents are reported to the immediate authorised person/s for directions in accordance with workplace procedures
       
Element: Unplanned events are referred to authorised person/s for directions in accordance with workplace procedures
       
Element: Quality and safety checks of work and testing of pipework is carried out in accordance with industry standards, work instructions and workplace procedures
       
Element: Complete work and relevant documentation
  • WHS/OHS and environmental risk control measures for work completion are followed
       
Element: Work site is rehabilitated, cleaned up and made safe in accordance with and workplace procedures
       
Element: Tools, equipment and any surplus resources and materials are cleaned, checked and securely stored in accordance with workplace procedures
       
Element: Relevant person/s are notified of work completion in accordance with workplace procedures
       
Element: Relevant documentation is completed and provided to appropriate person/s in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEG Gas Industry Training Package Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied 
 
 
 
 
 
 
 
 
 
 
 
WHS/OHS and environmental risk control measures, schedule of work and workplace procedures for carrying out work are followed 
 
 
 
 
 
 
 
 
 
WHS/OHS and environmental risk control measures for work completion are followed 
 
 
 
 

Forms

Assessment Cover Sheet

UEGNSG220 - Construct and lay polyethylene gas distribution mains
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEGNSG220 - Construct and lay polyethylene gas distribution mains

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: