Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG229 Mapping and Delivery Guide
Prepare simple drawings of as laid gas mains and services

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEGNSG229 - Prepare simple drawings of as laid gas mains and services
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to produce drawings for as laid, new and altered gas installations, mains and services. It includes preparing drawings of newly constructed or altered pipework that is required to be recorded for future locating.This unit does not include complex drafting skills.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Gas Distribution
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan to prepare simple drawings of as laid gas mains and services
  • Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied
       
Element: Types of drawings required and key features, symbols and abbreviations for each type of plan and drawing used in the gas industry are identified in accordance with the scope and standard of work being undertaken
       
Element: Drawing requirements and needs are determined from work instructions and confirmed with relevant person/s in accordance with workplace procedures
       
Element: Client issues in relation to the drawing requirements are clarified and resolved in accordance with workplace procedures
       
Element: Equipment, tools and apparatus for producing drawings are identified, obtained and checked for correct operation prior to commencing work
       
Element: Prepare drawings of as laid gas mains and services
  • Site inspection is conducted, as required, and factors that may impact on technical drawings, including orientation, altering landscapes, building structures or temporary land marks are identified
       
Element: Starting point and cross reference points are established and measurements from the starting point, distances and off sets taken and recorded in accordance with job requirements and workplace procedures
       
Element: As laid pipework is drawn to scale on graph paper using industry standard drawing conventions in accordance with relevant codes and technical industry standards
       
Element: Fittings that effect the off-set or depth of the pipework, including elbows and tees, are indicated on the drawing as required
       
Element: Additional fittings that need to be recorded in line with drawing specifications, including in-line valves and tapping tees, are indicated on the drawing, as required
       
Element: All dimensions, including off-sets, distances, directions, pipe diameter, symbols and abbreviations are included on the drawing in accordance with job specifications and workplace procedures
       
Element: Standard drawing conventions are used to correct original job drawing to show final as laid arrangement in accordance with workplace procedures
       
Element: Quality and safety checks of work and testing of pipework is conducted in accordance with industry standards, work instructions and workplace procedures
       
Element: Complete work and relevant documentation
  • Additional documentation is completed, including district plan number, network area, street name, pressure ratings, pipe size and type, date laid and additional comments, as required, in accordance with job requirements
       
Element: Drawings are finalised and signed off/closed in accordance with workplace procedures
       
Element: Tools, equipment and any surplus resources and materials are cleaned, checked and securely stored in accordance with workplace procedures
       
Element: Appropriate person/s are notified of work completion in accordance with workplace procedures
       
Element: All drawings and forms are completed and submitted to appropriate person/s in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEG Gas Industry Training Package Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied 
 
 
 
 
Site inspection is conducted, as required, and factors that may impact on technical drawings, including orientation, altering landscapes, building structures or temporary land marks are identified 
 
 
 
 
 
 
 
Additional documentation is completed, including district plan number, network area, street name, pressure ratings, pipe size and type, date laid and additional comments, as required, in accordance with job requirements 
 
 
 
 

Forms

Assessment Cover Sheet

UEGNSG229 - Prepare simple drawings of as laid gas mains and services
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEGNSG229 - Prepare simple drawings of as laid gas mains and services

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: