Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG311 Mapping and Delivery Guide
Site control of third party works in the vicinity of a transmission pipeline

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEGNSG311 - Site control of third party works in the vicinity of a transmission pipeline
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to plan, control and monitor third-party works in the vicinity of a transmission pipeline to ensure the integrity of the pipeline is not compromised. It includes applying relevant legislation, codes of practice, regulations, standards and workplace procedures; and completing work and relevant documentation.Third-party works include excavation, seismic activities and the use of explosives, vibrating rollers and the effect of additional loads on the pipeline.This unit applies to any basic and safe work site where gas and petrochemical liquids industry operations occur.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Gas Transmission
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan to undertake site control of third-party works in the vicinity of a transmission pipeline
  • Work schedule/s, drawings, plans, job requirements, materials and equipment are examined to assess the extent of preparation required for the third-party work
       
Element: Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant person/s in accordance with workplace procedures
       
Element: Hazards and work health and safety (WHS)/occupational health and safety (OHS) risk are identified and prioritised and control measures implemented and monitored
       
Element: Job requirements and workplace procedures for the work are obtained for all work sites and communicated to relevant person/s
       
Element: WHS/OHS, environmental and sustainable energy policies and procedures related to the work are obtained to ensure safe systems of work are followed
       
Element: Relevant work permits are obtained to coordinate and perform the work in accordance with regulatory requirements and workplace procedures
       
Element: Resources, including third parties, equipment, tools and personal protective equipment (PPE) required for the job are identified, scheduled, coordinated and confirmed in a safe and technical working order
       
Element: Clients are provided with possible solutions and options within the scope, acceptable cost and job requirements
       
Element: Communication issues with authorised persons, authorities, clients and land owners are resolved and work coordinated in accordance with work schedule and workplace procedures
       
Element: Persons participating in the work, including plant operators and contractors, are briefed, inducted and responsibilities coordinated and authorised as required in accordance with workplace procedures
       
Element: Conduct and monitor site control of third-party works
  • WHS/OHS and environmental risk control measures and policies and procedures are followed in accordance with workplace procedures
       
Element: Hazardous activities are performed safely in accordance with regulatory requirements and workplace procedures
       
Element: Equipment faults are identified through inspection and testing of operational equipment in accordance with work schedule and job requirements
       
Element: Hazard warnings and safety signs are recognised; and hazards and WHS/OHS risks assessed and reported to authorised person/s for directions in accordance with workplace procedures
       
Element: Operating conditions of equipment and pipeline are monitored and observed to ensure correct operating parameters are maintained in accordance with workplace procedures
       
Element: Negotiations with third parties to control the threat to the pipeline are carried out to ensure the pipeline can be accessed and monitored in accordance with workplace procedures and job requirements
       
Element: Fault-finding and troubleshooting techniques are applied to identify any repairs or maintenance required in accordance with job requirements and workplace procedures
       
Element: Third-party works are coordinated to ensure completion in agreed timeframe and to industry standards with a minimum of waste in accordance with job requirements
       
Element: Unplanned events and non-routine problems are identified and actioned in accordance with workplace procedures
       
Element: Quality and safety checks of the third-party work are conducted in accordance with job requirements, workplace procedures and community and industry standards
       
Element: Complete site control of third-party works and relevant documentation
  • Work undertaken is checked against work schedule for conformance and anomalies and proposed solutions reported in accordance with workplace procedures
       
Element: Accidents and injuries are reported in accordance with requirements and workplace procedures
       
Element: Work site is rehabilitated/cleaned up and confirmed safe and in accordance with workplace procedures
       
Element: Tools, equipment and any surplus resources and materials are cleaned, checked and returned to storage in accordance with workplace procedures
       
Element: Relevant work permit/s are signed off accordance with requirements and workplace procedures
       
Element: Work completion records, reports and as installed/modified drawing/s and documentation are completed, processed and the appropriate person/s notified in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEG Gas Industry Training Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work schedule/s, drawings, plans, job requirements, materials and equipment are examined to assess the extent of preparation required for the third-party work 
 
 
 
 
 
 
 
 
 
WHS/OHS and environmental risk control measures and policies and procedures are followed in accordance with workplace procedures 
 
 
 
 
 
 
 
 
 
Work undertaken is checked against work schedule for conformance and anomalies and proposed solutions reported in accordance with workplace procedures 
 
 
 
 
 

Forms

Assessment Cover Sheet

UEGNSG311 - Site control of third party works in the vicinity of a transmission pipeline
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEGNSG311 - Site control of third party works in the vicinity of a transmission pipeline

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: