Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG344 Mapping and Delivery Guide
Commission or decommission gas transmission pipelines

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEGNSG344 - Commission or decommission gas transmission pipelines
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to commission and decommission gas transmission pipelines in accordance with relevant legislation, standards, regulations, codes of practice and workplace procedures.It includes planning, undertaking and completing the commissioning/decommissioning of gas transmission pipelines and completing relevant documentation. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Gas Transmission
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan to commission/decommission gas transmission pipelines
  • Work schedule/s, drawings, plans, job requirements and material lists are obtained, analysed and confirmed if necessary by site inspection in accordance with workplace procedures
       
Element: Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the sites are identified, obtained and applied
       
Element: Job requirements and workplace procedures are obtained for all work sites and communicated to relevant person/s in accordance with workplace procedures
       
Element: WHS/OHS, environmental and sustainable energy policies and procedures are obtained, communicated and applied in accordance with workplace procedures
       
Element: Work is prioritised and sequenced by management for completion within acceptable timeframes following consultation with relevant person/s in accordance with workplace procedures
       
Element: Hazards are identified, WHS/OHS risks are assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
       
Element: Relevant work permit/s are obtained to access, isolate/de-energise systems and perform work in accordance with regulatory requirements and workplace procedures
       
Element: Scope of work and level of responsibility under the relevant work permit/authorisation is confirmed with relevant person/s in accordance with job requirements and workplace procedures
       
Element: Person/s, equipment, tools, materials, plans, specifications and personal protective equipment (PPE) required for the work are identified, scheduled, obtained and checked for correct operation and safety in accordance with workplace procedures
       
Element: First aid officer at the work site is confirmed with relevant person/s in accordance with job requirements and workplace procedures
       
Element: Communication issues with relevant stakeholders are resolved and work coordinated by management in accordance with work schedule and workplace procedures
       
Element: Pipeline is cleaned, pigged, bypassed and checked for commissioning/decommissioning readiness in accordance with workplace procedures
       
Element: Site is prepared to minimise risk and damage to property, commerce and individuals in accordance with the work schedule and workplace procedures
       
Element: Person/s participating in the work are briefed and responsibilities confirmed in accordance with job requirements and workplace procedures
       
Element: Road signs, barriers and warning devices are positioned in accordance with job requirements and traffic management plan
       
Element: Commission/decommission gas transmission pipelines
  • WHS risk control measures, schedules of work and workplace procedures for carrying out work are followed
       
Element: Materials, tools, equipment and measuring devices required for the work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
       
Element: Hazardous activities are conducted safely in accordance with WHS/OHS workplace procedures, job instructions and regulatory requirements
       
Element: Commissioning/decommissioning gas transmission pipelines is performed in agreed timeframe and to industry standards with a minimum of waste or damage to apparatus, circuits, and the surrounding environment or services using sustainable energy principles
       
Element: Commissioning/decommissioning gas transmission pipelines is performed in accordance with work schedule, job requirements and workplace procedures
       
Element: Hazard warnings and safety signs are recognised, hazards and WHS/OHS risks assessed and incidents reported to authorised person/s for directions in accordance with workplace procedures
       
Element: Adjustments are made for unplanned events when commissioning/decommissioning gas transmission pipelines in accordance with workplace procedures
       
Element: Unplanned events and non-routine problems are referred to authorised person/s for directions in accordance with workplace procedures
       
Element: Relevant reports and quality and safety checks of the work are conducted in accordance with job requirements and workplace procedures
       
Element: Complete work and relevant documentation
  • WHS/OHS risk control measures and procedures for completing the work are followed
       
Element: Testing is conducted using relevant tools/equipment and work checked for conformance with job requirements and anomalies reported in accordance with workplace procedures
       
Element: Accidents and injuries are reported in accordance with requirements and workplace procedures
       
Element: Work site is rehabilitated, cleaned up and made safe in accordance with workplace procedures
       
Element: Tools, equipment and any surplus resources and materials are cleaned, checked and stored securely in accordance with workplace procedures
       
Element: Relevant work permit/s are signed off and equipment returned to service in accordance with workplace procedures, job and regulatory requirements
       
Element: Final inspections are undertaken and work completion documentation is finalised, processed and provided to appropriate person/s in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEG Gas Industry Training Package Companion Volume Implementation Guide.

commissioning or decommissioning gas transmission pipelines must include at least two (2) of the following procedures:

steel pipeline coating repair

steel pipeline coating testing

steel field joint coating

commissioning or decommissioning gas transmission pipelines must include at least two (2) of the following procedures:

city gate operation (pressure regulator knowledge)

line valve operation

pressure control procedure

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work schedule/s, drawings, plans, job requirements and material lists are obtained, analysed and confirmed if necessary by site inspection in accordance with workplace procedures 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
WHS risk control measures, schedules of work and workplace procedures for carrying out work are followed 
 
 
 
 
 
 
 
 
WHS/OHS risk control measures and procedures for completing the work are followed 
 
 
 
 
 
 

Forms

Assessment Cover Sheet

UEGNSG344 - Commission or decommission gas transmission pipelines
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEGNSG344 - Commission or decommission gas transmission pipelines

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: