Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG621A Mapping and Delivery Guide
Control bulk storage of LPG

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency UEGNSG621A - Control bulk storage of LPG
Description 1) Scope:1.1) DescriptorThis unit covers controlling the bulk storage of LPG in terminals and depots installation in accordance with relevant legislation, codes, regulations and established procedures. This encompasses following procedures to correctly and safely transfer LPG; monitor and store LPG at facilities; and emergency response using appropriate materials, tools and equipment.
Employability Skills 5) This unit contains Employability SkillsThe required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements.
Learning Outcomes and Application 2)This competency standard shall apply to LPG bulk storage terminals & depots, subject to all Workplace Health and Safety (WHS)/Occupational Health and Safety (OHS) and duty of care requirements being met for the workplace.This unit is intended as an entry level AQF 3 competency for new entrants in the gas industry. It is suitable for employment-based programs under an approved contract of training.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Prerequisite Unit(s)4) Competencies4.1)Granting of competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed:UEGNSG141A Apply Workplace Health and Safety regulations, codes and practices in the gas industryUEGNSG005A Prepare to work in the Australian gas industryUEGNSG132A Carry out basic work activities in a gas industry work environmentUEGNSG140A Apply environmental policies and procedures in the utilities industry UEGNSG134A Establish a utilities infrastructure work siteLiteracy and numeracy skills4.2) Participants are best equipped to achieve this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 ‘Literacy and Numeracy’Reading3Writing3Numeracy3
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for the storage of LPG
  • Appropriate persons are consulted to ensure the work is coordinated effectively with others involved on the work site and the availability of equipment is determined
  • Equipment is checked in accordance with standard operating procedures and relevant requirements
  • WHS/OHS, environmental and sustainable energy policies and procedures related to requirements and established procedures for control storage of LPG in terminal are obtained and confirmed for the purposes of the work performed and communicated
  • Work is prioritised and sequenced following consultation with others for completion within acceptable timeframes and in accordance with established procedures
  • Risk control measures for identified hazards are prioritised, implemented and monitored against the work schedule
  • Relevant work permits are obtained to access, isolate/de-energise systems and perform work according to requirements and/or established procedures
  • Appropriate valves are operated and other resources including appropriately persons, equipment, tools and personal protective equipment required for the job are identified, scheduled and obtained and confirmed in working order
  • Relevant persons at worksite are confirmed to be current in related work procedures according to requirements
  • Site is prepared according to the work schedule to minimise risk and damage to property, commerce and individuals in accordance with established procedures
  • Persons participating in the work, including plant operators and contractors are fully briefed and respective responsibilities confirmed where applicable in accordance with established procedures
       
Element: Control Storage of LPG
  • LPG is stored in a safe and efficient manner in accordance with standard operating procedures and the condition of LPG is controlled within specifications and in accordance with legislative requirements
  • Lifting, climbing, working in confined spaces or aloft, and use of tools, techniques and practices are safely followed and currency maintained according to requirements confirmed
  • Required Skills and Knowledge for the control storage of LPG in terminal is applied to ensure completion in an agreed timeframe and to quality/ safety/ environmental standards according to requirements
  • Controlling the storage of LPG in terminal is carried out in accordance with the work schedule and to established procedures
  • Emergency response procedures and potential hazards, safety risks and control measures are monitored and preventative action taken and referred to appropriate authorities in accordance with requirements and established procedures
  • Abnormalities are reported and unplanned events incurred while controlling the storage of LPG in a terminal are undertaken within the scope of established procedures and responsibility
  • Fault-finding and troubleshooting techniques are applied to operational systems and equipment in order to identify any repairs or maintenance which may need to be undertaken
  • Ongoing checks of quality of the work are undertaken in accordance with given instructions and established procedures
       
Element: Complete work and relevant documentation
  • Work undertaken is checked against works schedule for conformance with requirements, anomalies are reported in accordance with established procedures
  • Accidents and injuries are reported in accordance with requirements and established procedures where applicable
  • Work site is rehabilitated, cleaned up and made safe in accordance with given instructions and established procedures
  • Tools, equipment and any surplus resources and materials are, where appropriate are cleaned, checked and returned to storage in accordance with established procedures
  • Relevant work permit(s) are signed off and equipment is returned to service in accordance with requirements
  • Work completion records, reports as installed and modified, drawings and documentation and information are finalised and processed and appropriate persons notified
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

8) The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all components parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

8.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry’s preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be ‘rich’ in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

8.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines — UEG11’. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range

Apply sustainable energy principles and practices as specified in the Performance Criteria and range

Demonstrate an understanding of the required skills and knowledge as described in this unit to such an extent that the learner’s performance outcome is reported in accordance with the preferred approach; namely a percentile graded result, where required by the regulated environment

Demonstrate an appropriate level of employability skills

Conduct work observing the relevant Anti-discrimination legislation, regulations, polices and workplace procedures

Demonstrate performance across a representative range of contexts from the prescribed items below.

Controlling of the bulk storage of LPG in terminals and depots in accordance with relevant legislation, codes, regulations and established procedures as described in 9.) Range Statement and including;

Range of tools/equipment/procedures/workplace

Group

The minimum number of items on which skill is to be demonstrated

Item List

A. Equipment

At least 3

Pumps and compressors

Valves

Vessels

Control and monitoring equipment

Mixing equipment

Sampling equipment

B. Procedures

All

Site operating procedures

C. Monitoring of storage facilities:

At least 5

Pressure

Temperature

Levels

Corrosion

Asset integrity

Gas leaks

Stock levels

Security

Fire protection systems

Shutdown systems

D. Emergency Response

All

Gas leaks and fire

Equipment failure

Hazards and incidents

E. Documentation

All

Maintenance records

Stock control records

Inspection checklists/ reports

WHS/OHS, environmental and associated legislative requirements

F. Unplanned event

At least one occasion

Deal with an unplanned event by drawing on required skills and knowledge to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment

8.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

WHS/OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this Competency Standard Unit.

Appropriate environmental regulation and work practices.

Appropriate organisational requirements.

Appropriate work environment, equipment and tools.

These should be part of the formal learning/assessment environment.

Assessment of this competency must also be undertaken in either an actual workplace or under a simulated work environment.

Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy.

The resources used for assessment should reflect current industry practices in relation to locating, proving and protecting utility assets

Method of assessment

8.4)

This Competency Standard Unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this Competency Standard Unit applies. This requires that the specified required Skills and Knowledge are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the required skills and knowledge described in this unit.

Concurrent assessment and relationship with other units

8.5)

There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied Competency Standard Units where listed.

UEGNSG132A

Carry out work activities in a gas industry work environment

UEGNSG134A

Establish a utilities infrastructure work site

BSBFLM312B

Contribute to team effectiveness

BSBFLM303C

Contribute to effective workplace relationships


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

7) This describes the skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of safe working practices for the controlling the bulk storage of LPG in a terminal or depot.

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies. The extent of the required skills and knowledge is provided below. It forms an integral part of this unit.

KS01-G621A Bulk gaseous fuel terminal storage

Evidence shall show an understanding of controlling the bulk storage of LPG in terminals and depots in accordance with relevant legislation, codes, regulations and established procedures to an extent indicated by the following aspects:

T1. Relevant Australian Standards, guidelines and codes of practice

T2. Relevant WHS/OHS policies and procedures.

Safety signs including workplace hazards and warnings

T3. LPG storage/pressure vessels

Requirements

Types, construction, size, valves, labelling, Material Safety Data Sheets (MSDS)

Testing and inspection procedures

T4. LPG bulk transfer

Requirements, applications, methods, procedures

Equipment/tools

Types, selection, manufacturers specifications/instructions, testing, set up, adjusting

Compressors, pumps

Pipes and hoses

T5. LPG Storage Facility

Operation

Manufacturer's specifications and standard adjustments to LP Gas equipment

Identifying variations and irregularities

Making analytical judgments for appropriate adjustments to plant and equipment

Monitoring, testing, inspection and reporting requirements

Safety

Gas alarm and communication equipment

Ignition prevention/control

Leak testing requirements, types, procedures, required equipment/tools

T6. Personal Protection Equipment

Types, application, checking, maintenance and storage

T7. Hazard identification, risk assessment and control

Work Permits, JHA’s, JSA’s, JSEA’s, SWM’s, etc.

Use of spill kits and PPE

T8. Manual handling

Characteristics, types, techniques

T9. Accidents and emergency

Types: fire, gas leak

Emergency response equipment and procedures

breathing apparatus

gas detectors/oxygen monitoring devices

compliance requirements

Emergency shutdown, fire protection and security requirements

Reporting

T10. Organisation's policies, quality requirements, specifications, forms and reports for work activities

10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

This Competency Standard Unit shall be demonstrated in relation to controlling bulk storage of LPG in a terminal or depot.

The following constants and variables included in the element/Performance Criteria in this unit are fully described in the Definitions Section of this volume and form an integral part of the Range Statement of this unit:

Appropriate persons

LPG storage and transfer plant and equipment

Legislative requirements

Operation and monitoring of storage facilities

Security/ Emergency / Fire protection systems

Site operating procedures

Documentation

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Appropriate persons are consulted to ensure the work is coordinated effectively with others involved on the work site and the availability of equipment is determined 
Equipment is checked in accordance with standard operating procedures and relevant requirements 
WHS/OHS, environmental and sustainable energy policies and procedures related to requirements and established procedures for control storage of LPG in terminal are obtained and confirmed for the purposes of the work performed and communicated 
Work is prioritised and sequenced following consultation with others for completion within acceptable timeframes and in accordance with established procedures 
Risk control measures for identified hazards are prioritised, implemented and monitored against the work schedule 
Relevant work permits are obtained to access, isolate/de-energise systems and perform work according to requirements and/or established procedures 
Appropriate valves are operated and other resources including appropriately persons, equipment, tools and personal protective equipment required for the job are identified, scheduled and obtained and confirmed in working order 
Relevant persons at worksite are confirmed to be current in related work procedures according to requirements 
Site is prepared according to the work schedule to minimise risk and damage to property, commerce and individuals in accordance with established procedures 
Persons participating in the work, including plant operators and contractors are fully briefed and respective responsibilities confirmed where applicable in accordance with established procedures 
LPG is stored in a safe and efficient manner in accordance with standard operating procedures and the condition of LPG is controlled within specifications and in accordance with legislative requirements 
Lifting, climbing, working in confined spaces or aloft, and use of tools, techniques and practices are safely followed and currency maintained according to requirements confirmed 
Required Skills and Knowledge for the control storage of LPG in terminal is applied to ensure completion in an agreed timeframe and to quality/ safety/ environmental standards according to requirements 
Controlling the storage of LPG in terminal is carried out in accordance with the work schedule and to established procedures 
Emergency response procedures and potential hazards, safety risks and control measures are monitored and preventative action taken and referred to appropriate authorities in accordance with requirements and established procedures 
Abnormalities are reported and unplanned events incurred while controlling the storage of LPG in a terminal are undertaken within the scope of established procedures and responsibility 
Fault-finding and troubleshooting techniques are applied to operational systems and equipment in order to identify any repairs or maintenance which may need to be undertaken 
Ongoing checks of quality of the work are undertaken in accordance with given instructions and established procedures 
Work undertaken is checked against works schedule for conformance with requirements, anomalies are reported in accordance with established procedures 
Accidents and injuries are reported in accordance with requirements and established procedures where applicable 
Work site is rehabilitated, cleaned up and made safe in accordance with given instructions and established procedures 
Tools, equipment and any surplus resources and materials are, where appropriate are cleaned, checked and returned to storage in accordance with established procedures 
Relevant work permit(s) are signed off and equipment is returned to service in accordance with requirements 
Work completion records, reports as installed and modified, drawings and documentation and information are finalised and processed and appropriate persons notified 

Forms

Assessment Cover Sheet

UEGNSG621A - Control bulk storage of LPG
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

UEGNSG621A - Control bulk storage of LPG

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: