Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG804 Mapping and Delivery Guide
Maintain single stage and single run gas flow and pressure control and measuring devices

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEGNSG804 - Maintain single stage and single run gas flow and pressure control and measuring devices
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to maintain single stage and single run gas distribution flow, pressure regulating/control devices and measuring devices, and complete work and relevant documentation. It includes single stage and single run regulator systems, manual control valves, diaphragm and sleeve regulators, and small capacity union connected positive displacement meters.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Gas Control Centre (Gas System Operations)
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare tomaintain gas flow, pressure control and measuring devices
  • Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied
       
Element: Plans, specifications and instructions for the work schedule are obtained and discussed with relevant person/s in accordance with job requirements and workplace procedures
       
Element: WHS/OHS, environmental and sustainable energy policies and procedures are obtained and applied in accordance with workplace procedures
       
Element: Hazards are identified, WHS/OHS risks are assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
       
Element: Scope of the responsibility under the relevant work permit and/or relevant notification to access, isolate/de-energise systems and perform work is obtained and confirmed with relevant person/s in accordance with job requirements and workplace procedures
       
Element: Equipment, tools and personal protective equipment (PPE) required for the work are identified, scheduled, obtained and checked for correct operation and safety in accordance with workplace procedures
       
Element: Relevant person/s are consulted to ensure the work is coordinated effectively with others involved
       
Element: Materials, plans, diagrams, drawings and resources required to maintain the devices are confirmed, scheduled and obtained in accordance with workplace procedures
       
Element: First aid, emergency and other related work safety procedures for an incident at the work site are checked and confirmed
       
Element: Third-party issues are referred to relevant person/s in accordance with workplace procedures
       
Element: Site preparation, safety plan and work schedule are confirmed with relevant person/s in accordance with workplace procedures
       
Element: Maintain gas flow, pressure control and measuring devices
  • WHS/OHS risk control measures, schedule of work and workplace procedures for carrying out work are followed
       
Element: Gas detectors are used to determine gas concentration levels at the work site to locate and pinpoint any gas escapes and supervisor advised of site safety in accordance with workplace procedures
       
Element: Materials, tools, equipment, PPE and measuring devices for the work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
       
Element: Hazardous activities are conducted safely in accordance with WHS/OHS workplace procedures and job instructions
       
Element: Work is carried out to the required standard, without waste of materials or damage to apparatus, circuits, and the surrounding environment or services using sustainable energy principles
       
Element: Hazard warnings and safety signs are recognised, hazards assessed and WHS/OHS risks and incidents reported to authorised person/s for directions in accordance with workplace procedures
       
Element: Information on gas flow, pressure measurement and control device performance is collected and reported in accordance with workplace procedures
       
Element: Maintenance of components is conducted in accordance with work schedule and workplace procedures
       
Element: Regulator, filter and meter components are set up and tested and system purged and pressurised in accordance with workplace procedures
       
Element: Faults and operational conditions of the components are identified, repaired/replaced and reported in accordance with workplace procedures
       
Element: Unplanned events are referred to relevant person/s for directions in accordance with workplace procedures
       
Element: Quality and safety checks are carried out in accordance with job instructions and workplace procedures
       
Element: Complete work and relevant documentation
  • WHS/OHS risk control measures for work completion and procedures are followed
       
Element: Work site is tidied and made safe in accordance with workplace procedures
       
Element: Tools, equipment and any surplus resources and materials are cleaned, checked and securely stored or disposed of in accordance with workplace procedures
       
Element: Relevant person/s are notified of work completion in accordance with workplace procedures
       
Element: Work completion documentation is completed accurately and provided to relevant person/s in accordance with workplace procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEG Gas Industry Training Package Companion Volume Implementation Guide.

work must be conducted in the following gas facilities:

district and customer metering and regulator sets

distribution line and path valves

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental measures for the site are identified, obtained and applied 
 
 
 
 
 
 
 
 
 
 
WHS/OHS risk control measures, schedule of work and workplace procedures for carrying out work are followed 
 
 
 
 
 
 
 
 
 
 
 
WHS/OHS risk control measures for work completion and procedures are followed 
 
 
 
 

Forms

Assessment Cover Sheet

UEGNSG804 - Maintain single stage and single run gas flow and pressure control and measuring devices
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEGNSG804 - Maintain single stage and single run gas flow and pressure control and measuring devices

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: