Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEGNSG811 Mapping and Delivery Guide
Monitor and operate complex flow control, measuring and regulating devices for gas distribution

Version 1.0
Issue Date: May 2024


Qualification -
Unit of Competency UEGNSG811 - Monitor and operate complex flow control, measuring and regulating devices for gas distribution
Description
Employability Skills
Learning Outcomes and Application This unit involves the skills and knowledge required to monitor and operate complex flow control, measuring and regulating device to monitor and control gas supply in gas distribution system in accordance with relevant legislation, codes of practice, regulations and workplace procedures.It includes on site local inspecting and controlling of gas flow and pressure; local monitoring of gas flow, pressure and measurement; recording and reporting on anomalies to gas flow pressure and measurement; and controlling the system to organisational and statutory requirements.This unit applies to gas distribution systems, subject to all work health and safety (WHS)/occupational health and safety (OHS) and duty of care requirements being met for the workplace.The application of the skills and knowledge described in this unit may require a license or permit to practice in the workplace.Other conditions may apply under state and territory legislative and regulatory licencing requirements which must be confirmed prior to commencing this unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Pressure Control Discipline
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to monitor and operate gas flow control, measuring and regulating devices
  • Work requirements for monitoring and operating complex gas flow control, measuring and regulating device are interpreted from plans, specifications and job instructions
       
Element: Relevant requirements and workplace procedures for work activities are communicated to relevant person/s
       
Element: WHS/OHS, environmental and sustainable energy workplace policies and procedures related to the monitoring and operating of complex flow controls are obtained, confirmed and communicated to relevant person/s
       
Element: Work activities are prioritised and sequenced in consultation with relevant person/s for completion within acceptable timeframes and in accordance with workplace procedures
       
Element: Risk control measures for identified hazards are prioritised, implemented and monitored in accordance with work schedule
       
Element: Relevant work permits are obtained to access, isolate/de-energise systems and perform work in accordance with job requirements and workplace procedures
       
Element: Resources, appropriately licensed person/s, equipment, tools and personal protective equipment (PPE) required for work activities are identified, scheduled and confirmed in a safe working order
       
Element: Liaison and communication with authorised person/s, authorities, clients and land owners is undertaken so work activities can be carried out, as required
       
Element: Persons participating in work activities are fully briefed and respective responsibilities confirmed, as required, in accordance with workplace procedures
       
Element: Monitor and operate gas flow control, measuring and regulating devices
  • Gas flow device and equipment performance information is collected and reported in accordance with workplace and job requirements
       
Element: Dealings with customers are consistent with workplace procedures and the specific needs of customers are identified and considered in targeting client service
       
Element: Monitoring and operating complex flow control devices workplace procedures are applied to ensure job is completed in agreed timeframe and to quality industry standards with a minimum of waste in accordance with job requirements
       
Element: Routine inspections of system are scheduled and monitored in accordance with the work schedule and workplace procedures
       
Element: Hazard warnings and safety signs are identified and hazards WHS/OHS risks assessed and reported to authorised person/s for directions in accordance with workplace procedures
       
Element: Data on system performance and usage is collected, analysed and reported with any unplanned events in the monitoring and operation of complex flow control in accordance with workplace procedures
       
Element: Ongoing quality checks of work activities are undertaken in accordance with given instructions and workplace procedures
       
Element: Control and adjust flows and complete records and reports
  • Flow regulating systems are inspected and adjustments made to meet gas flow demand and customer requirements
       
Element: Accidents and injuries are reported, as required in accordance with workplace procedures
       
Element: Gas flows and diversions are determined to facilitate repair or emergency activities in accordance with organisational job requirements
       
Element: Process faults and operational conditions of the gas system are identified, addressed and reported in accordance with organisational requirements
       
Element: Work completion records, reports and documentation are finalised, processed and appropriate person/s notified
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEG Gas Industry Training Package Companion Volume Implementation Guide.

competency must demonstrate monitoring and operating of complex gas flow control, measuring and regulating devices for gas pressure and flow control with the following:

custody transfer stations

inlets and city gates

scraper stations

gas storage facilities

main line valves

constants and variables must include the following:

inspecting and controlling

regulation of flow and pressure

measuring

recording and reporting

regulation of flow and regulation devices

regulation of the system

equipment

organisational and statutory requirements

equipment must include at least two (2) of the following procedures:

pressure controllers - operation and maintenance commissioning/setting

troubleshooting

pressure boosters minor repairs

types/models

basic regulators must include at least two (2) of the following:

sleeve types

diaphragm types

hydraulic plug types

distribution valves must include the following:

ball, plug, gate instrument and butterfly valves

meters must include at least two (2) of the following:

meters diaphragm meters

rotary meters

turbine meters

oil changing

operational checks must include at least three (3) of the following:

single run units

dual run units

district regulators

field regulators

pressure alterations must include the following:

industrial units

regulator stations

distribution mains

flaring and purging must include the following:

industrial units

regulator stations

distribution mains

overpressure protection systems - function and operation must include at least three (3) of the following:

over-pressure shut-off (OPSO)

internal pressure relief systems

pressure relief valves

slam shut systems

valve actuator & control systems

documentation must include the following:

risk assessments

timesheets

completing worksheets

notifications and work permits

equipment checklists

meter bypass forms

service orders

pressure recording charts

regulator station heaters must include the following:

heater: scheduled maintenance procedures

heater: operational checks

water quality testing

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work requirements for monitoring and operating complex gas flow control, measuring and regulating device are interpreted from plans, specifications and job instructions 
 
 
 
 
 
 
 
 
Gas flow device and equipment performance information is collected and reported in accordance with workplace and job requirements 
 
 
 
 
 
 
Flow regulating systems are inspected and adjustments made to meet gas flow demand and customer requirements 
 
 
 
 

Forms

Assessment Cover Sheet

UEGNSG811 - Monitor and operate complex flow control, measuring and regulating devices for gas distribution
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UEGNSG811 - Monitor and operate complex flow control, measuring and regulating devices for gas distribution

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: