Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPOPS209A Mapping and Delivery Guide
Perform Process Plant Inspections

Version 1.0
Issue Date: March 2024


Qualification -
Unit of Competency UEPOPS209A - Perform Process Plant Inspections
Description 1) This unit deals with the skills and knowledge required to conduct the inspection of generation production plant and associated equipment.
Employability Skills Refer to the Evidence Guide
Learning Outcomes and Application 3) This unit is intended to augment formally acquired competencies. It is suitable for employment-based programs under an approved contract of training. License to practise3.1) The skills and knowledge described in this unit do not require a licence to practise in the workplace. However, practice in this unit is subject to regulations directly related to Occupational Health and Safety and where applicable contracts of training such as apprenticeships and the like.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Prerequisite Unit(s) 2) Competencies2.1) There are no pre-requisite units.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for inspection
  • Relevant maintenance and operating history is obtained in accordance with work requirements
  • Needs and outcomes for plant inspections are defined in accordance with work requirements
  • Appropriate method sheets/check sheets are obtained in accordance with work requirements
  • Availability and access to plant is determined in accordance with work requirements
  • Preparations for inspection are undertaken in accordance with enterprise/site procedures
  • Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of the on-the-job training.
       
Element: Inspect process plant
  • Process plant is inspected in accordance with relevant sections of enterprise, state, or national standards
  • Process plant is identified and operational status determined in accordance with enterprise/site procedures
  • Inspection is conducted using appropriate methods in accordance with enterprise/site procedures
  • Needs and outcomes for the inspection are achieved in accordance with work requirements
       
Element:
       
Element: Relevant records and documentation are updated in accordance with job requirements and enterprise/site procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

8) This provides essential advice for assessment of the competency standard unit and must be read in conjunction with the Performance Criteria and the Range Statement of the competency standard unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this competency standard unit and shall be used in conjunction with all components parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

8.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and, Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be 'rich' in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

8.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each Element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the "Assessment Guidelines - UEP06". Evidence shall also comprise:

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and Range Statement

Apply sustainable energy principles and practices as specified in the Performance Criteria and Range Statement

Demonstrate an understanding of the Essential Knowledge and Associated Skills as described in 6) Essential Knowledge and Associated Skills of this unit

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated performance across a representative range of contexts from the prescribed items below:

Knowledge and application of relevant sections of: Occupational, health and safety legislation; Statutory legislation; Enterprise/site safety procedures; Enterprise/site emergency procedures

The process plant and its operating parameters

Inspection procedures and techniques

Identifying worn, damaged or faulty plant and equipment

Dealing with an unplanned event by drawing on Essential Knowledge and Skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

8.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this competency standard unit.

Competency Standards should be assessed in the workplace or simulated workplace and under the normal range of workplace conditions.

Assessment of this unit will be supported with documentary evidence, by means of endorsement stating type and application of work.

In addition to the resources listed above in Context of assessment', evidence should show competency working in confined spaces, with different types of plant and equipment as well as different structural/construction types and method and in a variety of environments.

Method of assessment

8.4)

This unit shall be assessed by methods given in Volume 1, Part 3 Assessment Guidelines.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this competency standard unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the Essential Knowledge and Skills described in this unit.

Concurrent assessment and relationship with other units

8.5)

There are no recommended concurrent assessments with this unit, however in some cases efficiencies may be gained in terms of learning and assessment effort being concurrently managed with allied competency standard units where listed.

Nil

Key competencies

8.6)

Evidence that particular key competencies have been achieved within this competency standard unit is in the context of the following Performance Criteria of evidence. See Volume 2, Part 4 for an explanation of Key competencies and levels of this Training Package.

Key competencies

Example of Application

Performance Level

How are ideas and information communicated within this competency?

Refer to the following example of application:

1

Sharing information orally or in writing in simple English to confirm work requirements. Discussion may take place with supervisors or others in the work group.

How can information be collected, analysed and organised?

Refer to the following example of application:

1

Accessing information required for operating the plant / equipment, including operating procedures and work instructions.

How are activities planned and organised?

Refer to the following example of application:

1

Planning the required activity, to include co-ordination and use of equipment, materials and tools to avoid backtracking and rework.

How is team work used within this competency?

Refer to the following example of application:

1

Teamwork may be applied in communicating the methods and procedures for the operation of the plant and equipment.

How are mathematical ideas and techniques used?

Refer to the following example of application:

1

Calculation of time to complete tasks, estimation of distances, levels, loads and material requirements.

How are problem solving skills applied?

Refer to the following example of application:

1

Follow established operational procedures.

How is use of technology applied?

Refer to the following example of application:

1

Access, communicate, measure and record information with regard to operations and performance of plant and equipment.

Skills Enabling Employment

8.7)

Evidence that competency in this unit incorporates skills enabling employment is in the context of the following performance. See Volume 2, Part 5 for definitions and an explanation of skills enabling employment.

Skills for Employment

Example of Application

1

Developing and using skills within a real workplace

Refer to the following example of application:

Completion of tasks within an acceptable timeframe and performance under supervision.

2

Learning to learn in the workplace

Refer to the following example of application:

Recalling of knowledge and development of practical skills.

3

Reflecting on the outcome and process of work task

Refer to the following example of application:

Recognition that performance of a work task meets the accepted standard.

4

Interacting and understanding of the context of the work task

Refer to the following example of application:

Completion of work tasks to meet the team's goals.

5

Planning and organising the meaningful work task

Refer to the following example of application:

Achievement of work tasks in a timely manner which contributes to the team's objectives.

6

Performing the work task in non-routine or contingent situations

Refer to the following example of application:

Complete the assigned work task to meet timelines and to seek supervisor assistance as required.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

6) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of performing process plant inspections.

The extent of the Essential Knowledge and Associated Skills required follows:

Evidence shall show that knowledge has been acquired for safe working practices of:

Relevant Occupational Health and Safety regulations

Relevant statutory legislation

Relevant enterprise/site safety procedures

Enterprise/site emergency procedures and techniques

Plant status; Environmental awareness

Location of relevant plant and equipment and its operating parameters

Enterprise recording procedures

Inspection procedures

Basic principles of related plant systems

Safety data sheets

Communication principles

Specific skills needed to achieve the Performance Criteria:

Apply relevant Occupational Health and Safety regulations

Apply relevant statutory legislation

Apply enterprise/site emergency procedures and techniques

Apply relevant enterprise/site safety procedures

Apply enterprise recording procedures

Locate relevant plant and equipment

Identify plant status

Recognise abnormal plant operating conditions

Communicate effectively

Recognise worn, damaged or seized components

Apply inspection techniques.

7) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

Generation plant and/or equipment may include fired and unfired pressure vessels; pipe work; valves and fittings; turbines and generators; chemical and water treatment processes; instrumentation and process control; and civil, electrical, thermal and mechanical works.

Relevant standards may include sections of Occupational Health and Safety legislation, enterprise safety rules and procedures, relevant state and federal legislation, national standards or codes of practices for plant.

Information and documentation sources may include verbal or written communications; enterprise safety rules documentation; equipment and alarm manuals; dedicated computer equipment; drawings, logic diagrams; plant records; enterprise/site log books; and manufacturer's operation and maintenance manuals.

Technical and operational indicators may include stimuli (audio, smell, touch, visual); remote or local indicators and recorders and alarms (visible and/or audible).

Inspection results may be conveyed to supervisor/team leader or equivalent; technical and engineering officers or equivalent; power system control personnel or equivalent; maintenance staff, power plant operations personnel; contractor and external specialist personnel.

Inspection environment may be remote from plant; aided by indicators and monitors; during inclement or otherwise harsh weather conditions; in wet/noisy/dusty areas; during night periods and in confined spaces.

Generic terms are used throughout this Training Package for vocational standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms are given in Volume 2, Part 1.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Relevant maintenance and operating history is obtained in accordance with work requirements 
Needs and outcomes for plant inspections are defined in accordance with work requirements 
Appropriate method sheets/check sheets are obtained in accordance with work requirements 
Availability and access to plant is determined in accordance with work requirements 
Preparations for inspection are undertaken in accordance with enterprise/site procedures 
Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of the on-the-job training. 
Process plant is inspected in accordance with relevant sections of enterprise, state, or national standards 
Process plant is identified and operational status determined in accordance with enterprise/site procedures 
Inspection is conducted using appropriate methods in accordance with enterprise/site procedures 
Needs and outcomes for the inspection are achieved in accordance with work requirements 
 
 

Forms

Assessment Cover Sheet

UEPOPS209A - Perform Process Plant Inspections
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

UEPOPS209A - Perform Process Plant Inspections

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: