Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UEPOPS244A Mapping and Delivery Guide
Operate and Monitor Site Services Water Systems

Version 1.0
Issue Date: April 2018


Qualification -
Unit of Competency UEPOPS244A - Operate and Monitor Site Services Water Systems
Description 1) This unit deals with the skills and knowledge required to operate, inspect and monitor of site services water systems, excluding fixed fire water services.
Employability Skills Refer to the Evidence Guide
Learning Outcomes and Application 3) This unit is intended to augment formally acquired competencies. It is suitable for employment-based programs under an approved contract of training. License to practise3.1) The skills and knowledge described in this unit do not require a licence to practise in the workplace. However, practice in this unit is subject to regulations directly related to Occupational Health and Safety and where applicable contracts of training such as apprenticeships and the like.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites Prerequisite Unit(s) 2) Competencies2.1) There are no prerequisite units.
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities
Slides
PPT
Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Plan and prepare work
  • Safety issues are identified to comply with enterprise/site requirements
  • Work requirements are identified from relevant personnel and documentation
  • Documentation to determine plant status is assessed and evaluated
  • Localised plant inspection and field preparations for service are carried out in accordance with manufacturer's and enterprise procedures
  • Plant operational prerequisites are established in accordance with manufacturer's and enterprise procedures
  • Sequence for recommissioning of plant is determined to suit existing circumstances in accordance with enterprise requirements
  • Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of the on-the-job training
       
Element: Operate plant
  • Plant is operated in accordance with enterprise and manufacturer's operating procedures
  • Plant is monitored and observed to detect deviations from normal operating conditions
  • Corrective actions are taken to rectify abnormalities in accordance with manufacturer's and enterprise procedures
       
Element: Test plant operation
  • Tests are performed in accordance with defined procedures applicable to the operational test
  • Plant is observed for correct operational response
  • Corrective action is taken when response is not in accordance with documentation, plant integrity or personnel safety requirements
  • Plant is returned to required operational status upon completion of test
       
Element: Analyse plant faults
  • Causes of abnormal plant operating conditions are identified by analysing the technical and operational information in a logical and sequential manner
  • Corrective action taken is in accordance with enterprise procedures
  • Plant integrity and personnel safety are maintained through consultation with appropriate personnel, and with reference to plant, technical and operational documentation
       
Element: Monitor and inspect plant
  • Plant to be monitored/inspected is physically identified
  • Plant is monitored/inspected for normal operation or to detect deviations.
  • Corrective action taken is in accordance with enterprise procedures
  • Appropriate personnel are notified when defects are detected
       
Element: Complete documentation
  • Documentation is updated and plant problems, movements, abnormalities and status are reported and logged in accordance with enterprise/site procedures
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

8) This provides essential advice for assessment of the competency standard unit and must be read in conjunction with the Performance Criteria and the Range Statement of the competency standard unit and the Training Package Assessment Guidelines.

The Evidence Guide forms an integral part of this competency standard unit and shall be used in conjunction with all components parts of this unit and, performed in accordance with the Assessment Guidelines of this Training Package.

Overview of Assessment

8.1)

Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry's preferred model for apprenticeships. However, where summative (or final) assessment is used it is to include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with Industry and, Regulatory policy in this regard.

Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed.

The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Hence, sources of evidence need to be 'rich' in nature so as to minimise error in judgment.

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its 'richness'. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

8.2)

Before the critical aspects of evidence are considered all prerequisites shall be met.

Evidence for competence in this unit shall be considered holistically. Each Element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the "Assessment Guidelines - UEP06". Evidence shall also comprise:

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline, work function and industrial environment. In particular this shall incorporate evidence that shows a candidate is able to:

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and Range Statement

Apply sustainable energy principles and practices as specified in the Performance Criteria and Range Statement

Demonstrate an understanding of the Essential Knowledge and Associated Skills as described in 6) Essential Knowledge and Associated Skills of this unit

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation, regulations, polices and workplace procedures

Demonstrated performance across a representative range of contexts from the prescribed items below:

Knowledge and application of relevant sections of: Occupational, health and safety legislation; Statutory legislation; Enterprise/site safety procedures; Enterprise/site emergency procedures

Preparation and planning of work

Operation of site services water systems

Operationally testing plant

Analysing plant faults

Monitoring plant operation

Dealing with an unplanned event by drawing on Essential Knowledge and Skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items.

Context of and specific resources for assessment

8.3)

This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:

OHS policy and work procedures and instructions.

Suitable work environment, facilities, equipment and materials to undertake actual work as prescribed by this competency standard unit.

Competency Standards should be assessed in the workplace or simulated workplace and under the normal range of workplace conditions.

Assessment of this unit will be supported with documentary evidence, by means of endorsement stating type and application of work.

In addition to the resources listed above in Context of assessment', evidence should show competency working, in limited spaces, with different types of plant and equipment as well as different structural/construction types and method and in a variety of environments.

Method of assessment

8.4)

This unit shall be assessed by methods given in Volume 1, Part 3 Assessment Guidelines.

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this competency standard unit applies. This requires that the specified Essential Knowledge and Associated Skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the Essential Knowledge and Skills described in this unit.

Concurrent assessment and relationship with other units

8.5)

For optimisation of training and assessment effort, competence in this unit may be assessed concurrently with the unit(s) as stated in Section 3.1 as well as the following units:

Nil

Key competencies

8.6)

Evidence that particular key competencies have been achieved within this competency standard unit is in the context of the following Performance Criteria of evidence. See Volume 2, Part 4 for an explanation of Key competencies and levels of this Training Package.

Key competencies

Example of Application

Performance Level

How are ideas and information communicated within this competency?

Refer to the following example of application:

1

Sharing information orally or in writing in simple English to confirm work requirements. Discussion may take place with supervisors or others in the work group.

How can information be collected, analysed and organised?

Refer to the following example of application:

1

Accessing information required for operating the plant / equipment, including operating procedures and work instructions.

How are activities planned and organised?

Refer to the following example of application:

1

Planning the required activity, to include co-ordination and use of equipment, materials and tools to avoid backtracking and rework.

How is team work used within this competency?

Refer to the following example of application:

1

Teamwork may be applied in communicating the methods and procedures for the operation of the plant and equipment.

How are mathematical ideas and techniques used?

Refer to the following example of application:

1

Calculation of time to complete tasks, estimation of distances, levels, loads and material requirements.

How are problem solving skills applied?

Refer to the following example of application:

1

Follow established operational procedures.

How is use of technology applied?

Refer to the following example of application:

1

Access, communicate, measure and record information with regard to operations and performance of plant and equipment.

Skills Enabling Employment

8.7)

Evidence that competency in this unit incorporates skills enabling employment is in the context of the following performance. See Volume 2, Part 5 for definitions and an explanation of skills enabling employment.

Skills for Employment

Example of Application

1

Developing and using skills within a real workplace

Refer to the following example of application:

Completion of tasks within an acceptable timeframe and performance under supervision.

2

Learning to learn in the workplace

Refer to the following example of application:

Recalling of knowledge and development of practical skills.

3

Reflecting on the outcome and process of work task

Refer to the following example of application:

Recognition that performance of a work task meets the accepted standard.

4

Interacting and understanding of the context of the work task

Refer to the following example of application:

Completion of work tasks to meet the team's goals.

5

Planning and organising the meaningful work task

Refer to the following example of application:

Achievement of work tasks in a timely manner which contributes to the team's objectives.

6

Performing the work task in non-routine or contingent situations

Refer to the following example of application:

Complete the assigned work task to meet timelines and to seek supervisor assistance as required.


Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)


Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

6) This describes the essential skills and knowledge and their level, required for this unit.

Evidence shall show that knowledge has been acquired of operating and monitoring site services water systems.

The extent of the Essential Knowledge and Associated Skills required follows:

Evidence shall show that knowledge has been acquired for safe working practices of:

Relevant Occupational Health and Safety regulations

Relevant statutory legislation

Relevant enterprise/site safety procedures

Enterprise/site emergency procedures and techniques

Relevant plant and equipment, its location and operating parameters

Plant status

Environmental legislation

Enterprise recording procedures; Communication principles

Control and data acquisition systems

Computers and software; Supervisory, alarm, protection and control equipment

Emergency procedures

Basic motor performance

Basic pump and compressor performance

Valve and actuator types and characteristics

System components and interaction

Introduction to power production plant

Typical arrangements of power production plant

Mathematics

Mechanics

Properties of matter

Lubrication and bearings

Compressors

Feedwater treatment

Pumps

Liquid pumping systems

Auxiliary supply systems

Safe operating principles

Electrical protection

Specific skills needed to achieve the Performance Criteria:

Apply relevant Occupational Health and Safety regulations

Apply relevant statutory legislation

Apply relevant enterprise/site safety procedures

Apply enterprise/site emergency procedures and techniques

Apply enterprise recording procedures

Identify plant status

Prepare plant/equipment for operation

Organise resources

Operate site services water systems

Apply diagnostic and testing techniques

Identify and respond to abnormal plant operating conditions

Plan and prioritise work

Use relevant hand tools

Communicate effectively

Apply data analysis techniques and tools

Operate in a team

Use diagrams, drawings and symbols

Co-ordinate the operation of equipment to maintain plant integrity, personnel safety and continuity of supply.

7) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

Systems, plant and/or equipment may include electrical supply switchboards; chemical treatment systems; raw water supply; town water supply; supervisory, alarm, protection and control equipment; high and low pressure pump; valves and actuators (electric, hydraulic, pneumatic and manual); compressed air systems; filters; strainers; and pressure control devices.

Safety standards may include relevant sections of Occupational Health and Safety legislation enterprise safety rules, relevant state and federal legislation, national standards for plant and environmental legislation.

Information and documentation sources may include verbal and written communications, enterprise/site safety rules documentation/form(s), equipment and alarm manuals, dedicated computer equipment, enterprise/site standing and operating instructions, enterprise/site log book and manufacturer's operation and maintenance manuals.

Technical and operational indicators may include stimuli (audio, smell, touch, visual), local indicators and recorders, computers and alarms (visible and or audible).

Communications may be by means of telephone, two way radio, pager, public address system, facsimile, computer (electronic mail) and operating log (written or verbal).

Tests may include stand-by plant tests, post maintenance operating tests and tests for water quality.

Appropriate personnel to consult, give or receive direction may include, supervisor/team leader or equivalent, power system control personnel or equivalent, contractor and specialist personnel, maintenance staff and power plant operations personnel.

Test, fault finding and operating tools may include hand and power tools and control system equipment.

Operating environment may be during inclement or otherwise harsh weather conditions, in wet/noisy/dusty/hot areas and during continuous operation.

Faults and abnormal operating conditions may include motor/pump/ actuator/valve/damper failure/malfunction, control equipment failure/ malfunctions, loss of electrical supply to plant and equipment, excessive vibration pumps/motors, high filter/strainer differentials, loss of major auxiliary, loss of control medium and water quality.

Generic terms are used throughout this Training Package for vocational standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms are given in Volume 2, Part 1.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Safety issues are identified to comply with enterprise/site requirements 
Work requirements are identified from relevant personnel and documentation 
Documentation to determine plant status is assessed and evaluated 
Localised plant inspection and field preparations for service are carried out in accordance with manufacturer's and enterprise procedures 
Plant operational prerequisites are established in accordance with manufacturer's and enterprise procedures 
Sequence for recommissioning of plant is determined to suit existing circumstances in accordance with enterprise requirements 
Where appropriate, the teams and individuals roles and responsibilities within the team are identified and, where required, assist in the provision of the on-the-job training 
Plant is operated in accordance with enterprise and manufacturer's operating procedures 
Plant is monitored and observed to detect deviations from normal operating conditions 
Corrective actions are taken to rectify abnormalities in accordance with manufacturer's and enterprise procedures 
Tests are performed in accordance with defined procedures applicable to the operational test 
Plant is observed for correct operational response 
Corrective action is taken when response is not in accordance with documentation, plant integrity or personnel safety requirements 
Plant is returned to required operational status upon completion of test 
Causes of abnormal plant operating conditions are identified by analysing the technical and operational information in a logical and sequential manner 
Corrective action taken is in accordance with enterprise procedures 
Plant integrity and personnel safety are maintained through consultation with appropriate personnel, and with reference to plant, technical and operational documentation 
Plant to be monitored/inspected is physically identified 
Plant is monitored/inspected for normal operation or to detect deviations. 
Corrective action taken is in accordance with enterprise procedures 
Appropriate personnel are notified when defects are detected 
Documentation is updated and plant problems, movements, abnormalities and status are reported and logged in accordance with enterprise/site procedures 

Forms

Assessment Cover Sheet

UEPOPS244A - Operate and Monitor Site Services Water Systems
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:


Assessment Record Sheet

UEPOPS244A - Operate and Monitor Site Services Water Systems

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: