Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

UETTDREL13 Mapping and Delivery Guide
Comply with sustainability, environmental and incidental response policies and procedures

Version 1.0
Issue Date: June 2024


Qualification -
Unit of Competency UETTDREL13 - Comply with sustainability, environmental and incidental response policies and procedures
Description
Employability Skills
Learning Outcomes and Application This unit covers the compliance of environmental and incidental response procedures whilst undertaking tasks in the electricity supply industry (ESI) workplace and refers to relevant legislation, codes and practices and established procedures. The unit refers to compliance with relevant sections of federal and state/territory work health and safety (WHS)/occupational health and safety (OHS) and Environmental Protection Acts. The checking of plant and equipment should be performed through visual and mechanical checks. The plant and equipment used is that typically used in preparing worksites and compliance with environmental policies and procedures. Relevant regulations and procedures are referred to, but not limited to, the worksite and the use of plant; machinery/equipment; cleaning materials and aids; equipment operation; personal protective equipment (PPE), including safety boots, eye and ear protection, and safety helmets.The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace subject to regulations for undertaking of electrical work. Other conditions may apply under state and territory legislative and regulatory licencing requirements which must be confirmed prior to commencing this unit.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.
Prerequisites/co-requisites
Competency Field Entry Level Cross Discipline
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare to comply with environmental and incident response procedures
  • Work instructions are received and confirmed
       
Element: Relevant requirements and established procedures to be followed for the work to be performed are discussed with all personnel to establish and confirm the work schedule
       
Element: WHS/OHS and environmental policies and procedures to be followed for the work to be performed are received and confirmed
       
Element: Suggestions to assist with complying with environmental and incident response procedures are made to others involved in the work
       
Element: Hazards are identified, WHS/OHS risks assessed and emergency exits kept clear according to given instructions and established procedures
       
Element: Scope of responsibility under relevant work permits are received and confirmed according to requirements and established procedures with relevant personnel
       
Element: Resources, including environmental compliance and personal protective equipment (PPE), required for the incident are obtained and in working order according to established procedures
       
Element: Relevant responsibilities associated with first aid and other related work safety procedures at the worksite are confirmed in accordance with requirements and established procedures to ensure safety measures are followed in the instance of an incident
       
Element: Client issues are referred to appropriate personnel in accordance with industry and community standards
       
Element: Site is reviewed according to given instructions and the work schedule for a quality outcome and to minimise risk and damage to property, commerce and individuals in accordance with established procedures
       
Element: Road signs, barriers and warning devices are positioned in accordance with requirements
       
Element: Carry out compliance with environmental and incident response procedures
  • WHS/OHS and sustainable energy principles and practices to reduce the incidents of accidents and minimise waste are followed in accordance with given instructions, requirements and/or established procedures
       
Element: Environmental requirements for the work are mentioned and reviewed and control measures recommended for inclusion in the work process
       
Element: Any environmental incidents and potential problems are referred to appropriate personnel in accordance with established procedures
       
Element: Lifting, climbing, working in confined spaces and/or aloft, and use of power tools, techniques and practices are safely followed in accordance with given instructions and according to requirements to eliminate the prospects of incidents
       
Element: Operational knowledge for compliance with environmental and incident response procedures is confirmed to ensure completion in an agreed timeframe and to quality standards with a minimum of waste according to requirements and established procedures
       
Element: Complying with environmental and incident response procedures is carried out in accordance with given instructions and established procedures
       
Element: Hazard warnings and safety signs are recognised and hazards and assessed WHS/OHS risks are reported to immediate authorised personnel for directions according to established procedures
       
Element: Non-routine events are referred to immediate authorised personnel for directions according to established procedures
       
Element: Problems associated with complying with environmental and incident response procedures are dealt with using acquired known solutions and skills related to routine procedures to ensure work instructions and established procedures are met
       
Element: Ongoing checks of quality of the work are undertaken in accordance with given instructions and established procedures
       
Element: Complete the compliance with environmental and incident response procedures
  • Work undertaken is checked against work schedule and anomalies reported to authorised personnel in accordance with established procedures
       
Element: Accidents and incidents are reported to authorised personnel in accordance with established procedures
       
Element: Worksite is rehabilitated, cleaned up and made safe in accordance with given instructions and established procedures
       
Element: Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures
       
Element: Appropriate personnel are notified of work completion according to established procedures
       
Element: Environmental completion records, report forms/data sheets are completed accurately in accordance with given instructions and established procedures
       

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the Companion Volume Implementation Guide.

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Work instructions are received and confirmed 
 
 
 
 
 
 
 
 
 
 
WHS/OHS and sustainable energy principles and practices to reduce the incidents of accidents and minimise waste are followed in accordance with given instructions, requirements and/or established procedures 
 
 
 
 
 
 
 
 
 
Work undertaken is checked against work schedule and anomalies reported to authorised personnel in accordance with established procedures 
 
 
 
 
 

Forms

Assessment Cover Sheet

UETTDREL13 - Comply with sustainability, environmental and incidental response policies and procedures
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

UETTDREL13 - Comply with sustainability, environmental and incidental response policies and procedures

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: