This unit applies to workers in irrigation enterprises or contracting businesses. The work is normally carried out with limited supervision and within enterprise guidelines.

ELEMENT

PERFORMANCE CRITERIA

1. Plan and prepare job

1.1. Materials required for the job are transported to the location and stacked in a safe position.

1.2. Tools, equipment and machinery are selected consistent with the requirements of the job.

1.3. Quality Assurance requirements are recognised and adhered to.

1.4. Personal Protective Equipment (PPE) is used and maintained according to procedures.

1.5. Occupational Health and Safety (OHS) hazards are identified and safety concerns reported to the supervisor.

2. Set out and excavate trenches

2.1. Location and depths of trenches is determined from job drawings.

2.2. Trench location is set out with pegs and string line and clearly marked with appropriate marking material.

2.3. Manual support is provided to machine operator with excavation of trenches, shoring or battering in accordance with OHS requirements.

2.4. Trenches are cleaned out by hand and corners left square.

2.5. Trench depths and grades are checked for conformity to job requirements.

3. Lower and position pipes

3.1. Bedding materials are laid and consolidated to specified depths and grades.

3.2. Pipes are installed/lowered into position with appropriate mechanical equipment according to specifications.

3.3. Pipe joints and fittings are installed to job specification.

3.4. Pipes are back filled to specifications and cover left level with surrounding ground.

4. Clean up

4.1. Site is cleared and excess soil, debris and unwanted materials removed in accordance with organisational procedures and environmental requirements.

4.2. Tools and equipment are cleaned, maintained and stored.

Required skills

identify hazards and adopt safe work practices

read and interpret scale drawings and specifications

use hand signals for communicating with machine operator

measure trench width, depth, grade and location

lay and join irrigation pipe

level cover with existing ground

use power tools and hand tools

handle materials safely

work safely to instructions

use oral communication skills/language competence to fulfil the job role as specified by the organisation including questioning, active listening, asking for clarification and seeking advice from supervisor

use interpersonal skills to relate to people from a range of social, cultural and ethnic backgrounds and with a range of physical and mental abilities.

Required knowledge

OHS requirements for excavating, filling trenches and laying pipes, including relevant legislation regulations and codes

irrigation and/or drainage pipes, types and sizes

hand and power tools and equipment

bedding and backfill materials and handling methods

scale drawings for laying irrigation and/or drainage pipes

hand signals for communication

OHS issues and procedures related to trenching and pipe laying

Quality Assurance procedures for excavating, filling trenches and laying pipes

environmental impacts and procedures for laying pipe.

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy holistically all of the requirements of the performance criteria and required skills and knowledge and include achievement of the following:

set out and excavate trenches using manual equipment and a machine operator

check trench depth and grade

lay bedding materials

position irrigation and/or drainage of varying types and sizes

install pipe joints and fittings to job specification.

Context of and specific resources for assessment

Competency requires the application of work practices under work conditions. Selection and use of resources for some worksites may differ due to the regional or enterprise circumstances.

The range statement relates to the unit of competency as a whole.

Irrigation and drainage pipes may include:

concrete

metal

polythene

polyvinylchloride (PVC)

the type and size of pipe will vary with the terrain, soil type and traffic load.

Fittings may include:

valves

outlets

thrust blocks and connecting surfaces such as O-rings.

Mechanical equipment may include:

equipment for lowering irrigation and/or drainage pipes but does not include operating excavation machinery such as trench diggers or ditch witches.

Unit sector

Irrigation

This unit contains employability skills.