Application
This unit of competency describes the skills and knowledge required to assist with the installation and maintenance of pumps and flow control devices for irrigation.
It applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work. They undertake defined activities and work in a structured context.
No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Elements and Performance Criteria
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Plan and prepare for work on pumping and flow control systems | 1.1 Read work instructions relating to work activity and confirm with the supervisor 1.2 Prepare tools and equipment and use according to the supervisor's instructions 1.3 Select personal protective equipment and clothing and ensure correct fit 1.4 Identify manual handling and other work health and safety hazards and tell supervisor |
2. Carry out installation and maintenance tasks for pumps and flow control devices | 2.1 Carry out installation tasks as directed for pumps and flow control devices 2.2 Carry out routine inspections of flow control and metering facilities in irrigation systems 2.3 Carry out preventative maintenance and service of equipment and facilities |
3. Review, record and report activities | 3.1 Check, maintain and store equipment, tools and materials 3.2 Restore work site to meet environmental and workplace requirements 3.3 Record and report installation and maintenance activities |
Evidence of Performance
The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.
The candidate must provide evidence that they can:
interpret plans, charts and instructions
perform work-related calculations
organise equipment and materials for installation work
use power tools and hand tools
handle materials safely
identify and respond to predictable operational problems
Evidence of Knowledge
The candidate must demonstrate knowledge of:
principles and practices of pump and control flow devices
basic principles of hydraulics and the operation of flows
capacity and limitations of equipment used on the site
flow measurement principles and procedures
function of control systems
layout and performance of pipes and fittings
lock-out procedures for mechanical and electrical installations
types of flow control devices and their purpose
types of pumps and their function and use
Assessment Conditions
Assessors must satisfy current standards for RTOs.
Foundation Skills
Foundation Skills essential to performance are explicit in the performance criteria of this unit of competency.
Range Statement
Sectors
Irrigation (IRG)