Application
This unit of competency describes the skills and knowledge required to operate specialised machinery and equipment.
All work must be carried out to comply with workplace procedures, work health and safety requirements manufacturer’s specifications and sustainability practices.
This unit applies to individuals who work under broad direction and take responsibility for their own work. They use discretion and judgement in the selection and use of available resources.
No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Elements and Performance Criteria
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Select and prepare specialised machinery and equipment for use | 1.1 Identify and report potential work health and safety hazards implement control measures. 1.2 Conduct routine pre operational checks as described in operator manual 1.3 Replace and report damaged or worn components 1.4 Select and use appropriate personnel protective equipment 1.5 Attach ancillary equipment and check for correct operation |
2. Operate specialised machinery and equipment | 2.1 Operate machinery and equipment in a safe, efficient and controlled manner 2.2 Operate machinery and equipment in accordance with task requirements, conditions and manufacturers operating guidelines 2.3 Monitor machinery and equipment performance and efficiency and make adjustments as required 2.4 Assess and minimise potential risks to self, others and the environment |
3. Complete and report on specialised machinery and equipment operation | 3.1 Follow shut down procedures 3.2 Perform routine operational servicing and minor maintenance 3.3 Identify and report malfunctions, faults, irregular performance or damage 3.4 Clean, secure and store machinery and equipment 3.5 Maintain machinery and equipment use records |
Evidence of Performance
The candidate must be observed operating specialised agricultural or horticultural machinery and equipment.
The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.
The candidate must provide evidence that they can:
identify hazards and implement safe work procedures
complete pre and post operational checks
recognise and reporting defects
operate machinery and equipment in a safe, efficient manner to perform specific tasks by utilising the various component, controls and features to industry standards
perform minor maintenance and fault finding
perform shut down procedures
complete operational records
follow enterprise work health and safety policies
Evidence of Knowledge
The candidate must demonstrate knowledge of:
manufacturer's requirements and workplace requirements for:
pre-operational checks
machinery operation techniques
operator level servicing
shutdown
emergency procedures
basic diagnostic techniques
equipment characteristics, technical capabilities and limitations
components and controls features and functions
relevant work health and safety and environmental legislation, Codes of Practice and enterprise requirements
Assessment Conditions
Competency is to be assessed in the workplace or simulated environment that accurately reflects performance in a real workplace setting. All evidence collected must meet minimum requirements including industry standard timeframes for performance of tasks.
Evidence records must include a description of the machinery and equipment that the candidate was assessed on.
Assessors must satisfy current standards for RTOs.
Foundation Skills
Foundation Skills essential to performance are explicit in the performance criteria of this unit of competency.
Range Statement
Sectors
Machinery operation and maintenance (MOM)