Application
This unit of competency describes the skills and knowledge required to receive, move and sample bulk materials in a storage area.
Bulk materials are handled to industry standards and the bulk material storage program in relation to segregation and storage conditions ensuring minimum loss or damage and optimum returns.
This unit applies to individuals who work under broad direction and take responsibility for their own work. They use discretion and judgement in the selection and use of available resources.
No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Elements and Performance Criteria
Element | Performance criteria |
Elements describe the essential outcomes. | Performance criteria describe the performance needed to demonstrate achievement of the element. |
1. Prepare to work in bulk materials storage area | 1.1 Interpret work to be undertaken from the work program where necessary, and confirmed with supervisor 1.2 Identify work health and safety hazards, assess risks and implement suitable control measures 1.3 Select, use and maintain suitable personal protective clothing 1.4 Select, check and maintain tools and equipment suitable for the work to be undertaken 1.5 Identify environmental implications of undertaking work in the bulk materials storage area, assess likely outcomes and responsible action taken if necessary 1.6 Maintain biosecurity protocols at all times 1.7 Identify legislative, regulatory and industry requirements 1.8 Design and implement contingency strategies |
2. Sample bulk materials for testing | 2.1 Take representative samples of bulk materials for testing in line with the requirements of the bulk materials storage program 2.2 Undertake sampling safely, following the prescribed guidelines for the activity 2.3 Prepare representative bulk materials samples for dispatch by clearly labelling and packaging accordingly 2.4 Dispatch samples to the analysing body |
3. Move bulk materials into and out of storage | 3.1 Identify bulk materials for handling and storage from written or verbal instructions 3.2 Segregate bulk materials according to type, variety and quality characteristics 3.3 Take measures to minimise insect and weed infestation and contamination during the movement of the bulk materials 3.4 Check bulk materials regularly for insect infestation and contamination during movement 3.5 Clean any storage and handling equipment that is used thoroughly after emptying, and dismantle if necessary 3.6 Select silo types and handling equipment for each bulk material type in relation to their storage characteristics and flow properties 3.7 Implement suitable measures to minimise the effect of desiccant dusts on the flow properties of bulk materials 3.8 Update and store records appropriately |
4. Repair and maintain storage facility | 4.1 Identify the need for repairs to the facility through observation or instruction 4.2 Conduct maintenance and repairs as required 4.3 Complete maintenance records and other appropriate information 4.4 Clean and maintain workshop and work areas 4.5 Report maintenance and repairs, damage, malfunctions or irregular performance in machinery, tools and equipment 4.6 Clean, maintain and store tools and equipment |
Evidence of Performance
The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.
The candidate must provide evidence that they can:
check equipment and storage facilities and identify current or impending faults
record bulk materials stocks and movements
conduct silo readings
identify bulk materials pests and damage
use communication systems
sample and conduct a simple analysis of bulk materials
handle and manoeuvring equipment
test bulk materials for moisture, contamination and quality
complete pre-operational checks on basic tools and equipment
perform routine safety, service and maintenance procedures on tools, equipment and machinery
operate hand and independently powered tools and clean equipment to industry standards
clean, securing and storing machinery and equipment
perform basic trouble shooting
recognise and rectifying minor operational faults
handle hazardous substances (fuels) safely
use industry standard terminology.
Evidence of Knowledge
The candidate must demonstrate knowledge of:
the client's sampling and classification requirements
bulk materials types and characteristics
common bulk materials pests sand problems
legislative requirements, manufacturer’s instructions and workplace procedures
silo operations and configuration, machinery and operating practices
organisation requirements for protective equipment and safe practices in relation to work health and safety
organisation and industry guidelines for segregation of bulk materials quality assurance principles
pre-operational and safety checks, servicing and maintenance procedures for tools and equipment
potential hazards associated with the operation of basic tools and equipment
general machine maintenance procedures
machinery operating principles and operating methods
machinery storage and protection methods
environmental impacts associated with the operation of machinery and equipment
personal protective clothing and equipment and when and how it should be used
cleaning and storage of machinery, equipment and materials
enterprise recording and reporting procedures.
Assessment Conditions
Assessors must satisfy current standards for RTOs.
Foundation Skills
Foundation Skills essential to performance are explicit in the performance criteria of this unit of competency.
Range Statement
Sectors
Work (WRK)