AUMABA002
Operate load shifting equipment


Application

This unit describes the performance outcomes required to safely use load shifting equipment.

It applies to those in an automotive environment and involves the application of skills and knowledge to select and use suitable load shifting equipment and perform pre-operational inspections to ensure its safe operation.

Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.


Elements and Performance Criteria

Elements

Performance Criteria

Elements describe the essential outcomes

Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section

1. Inspect load shifting equipment

1.1 Inspection of load shifting equipment is completed according to workplace procedures

1.2 Load weights and volumes are identified, and confirmed by supervisor

1.3 Equipment faults are identified, documented and reported to appropriate personnel

2. Lift, shift and place load

2.1 Load characteristics and handling requirements are identified and appropriate shifting device is selected

2.2 Shifting route is planned and identified hazards are controlled

2.3 Load is placed in specified locations without causing damage to property, machinery or equipment

2.4 Lift, shift and placement of load are completed using approved work health and safety (WHS) methods and equipment, according to workplace procedures

3. Complete load shifting operations

3.1 Post-inspection of load shifting equipment is completed

3.2 Identified faults are tagged and reported

3.3 Load shifting equipment is stored and secured

3.4 Load shifting documentation and maintenance records are completed according to workplace procedures

Foundation Skills

This section describes those language, literacy, numeracy and employment skills that are essential to performance.

Skills

Description

Reading skills to:

interpret load shifting equipment operating procedures and safety requirements

review load shifting equipment pre- and post-inspection schedules.

Writing skills to:

legibly complete inspection schedules, maintenance reports and workplace documents.

Oral communication skills to:

convey identified equipment faults to appropriate personnel

speak clearly and directly to inform others of loading and shifting requirements

communicate equipment operating instructions and load weights and volumes to co-workers.

Numeracy skills to:

identify and where necessary estimate weights and volumes of objects to be shifted

identify numbers in metric and imperial units and measurements.

Planning and organising skills to:

identify and prepare load shifting equipment and work area

identify overhead and ground level workplace hazards

conduct pre- and post-use inspection of equipment

complete workplace documentation.

Problem-solving skills to:

identify load shifting equipment appropriate for the job

identify load shifting equipment faults and defects.

Teamwork skills to:

advise co-workers of load shifting activities.


Range Statement

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.

Inspection must include:

hydraulic and pneumatic leaks

lifting block

operation of control system

vehicle hazard warning light

wheels and tyres

wire rope, chains and lifting attachments.

Load shifting equipment must include:

overhead travelling crane

pallet truck

trolley jack.

Workplace procedures must include:

equipment operating instructions

identifying load weights and volumes

pre- and post-use inspection of equipment

recording and reporting

load storage location

WHS requirements.


Sectors

Support and Logistics


Competency Field

Manufacturing - Common