Application
This unit describes the performance outcomes required to assemble, install and test a vehicle pneumatic system kit and its associated components.
It applies to those in an automotive manufacturing environment and involves the application of skills and knowledge at a specialist level.
No licensing, legislative or certification requirements apply to this unit at the time of publication.
Elements and Performance Criteria
Elements | Performance Criteria |
Elements describe the essential outcomes | Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions section |
1. Prepare pneumatic system kit | 1.1 Work order and workplace instructions are used to determine job requirements 1.2 Assembly and installation information is identified from manufacturer specifications 1.3 Tools and equipment are selected to meet job requirements and checked for quality and correct operation |
2. Assemble pneumatic system | 2.1 Workplace procedures are identified and followed 2.2 Pneumatic system kit is assembled according to manufacturer specifications 2.3 Pneumatic system kit is installed using installation procedures that comply with manufacturer specifications and tolerances and without causing damage to components or systems |
3. Test pneumatic system | 3.1 Testing procedures and requirements are accessed and interpreted from manufacturer specifications 3.2 Pneumatic system is tested according to manufacturer specifications and adjusted if required 3.3 Final inspection and test results are recorded according to workplace procedures |
4. Complete work processes | 4.1 Tools and equipment are cleaned, inspected for defects and stored according to workplace procedures 4.2 Faulty equipment is identified, tagged and reported 4.3 Waste material is collected, recycled or disposed of according to workplace procedures 4.4 Workplace documents are completed according to workplace procedures |
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance.
Skills | Description |
Reading skills to: | interpret pneumatic system kit assembly and installation information interpret manufacturer specifications and tolerances identify work order and job specifications. |
Writing skills to: | legibly record pneumatic system test results complete workplace checklists and faulty equipment tags. |
Oral communication skills to: | clarify workplace instructions and determine job requirements communicate test results and required adjustments. |
Numeracy skills to: | interpret manufacturer specifications and tolerances interpret test measurements and results. |
Planning and organising skills to: | identify and prepare pneumatic system kit and its components follow manufacturer assembly specifications and instructions prepare assembly equipment and work area. |
Range Statement
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below. | |
Assembly and installation information must include: | customer requirements for the assembly and installation of pneumatic system kits pneumatic system kit manufacturer specifications vehicle manufacturer specifications. |
Workplace procedures must include: | work health and safety (WHS) and environmental requirements to assemble and install pneumatic system kits pneumatic system testing and adjustment procedures. |
Sectors
Technical - Manufacture
Competency Field
Manufacturing - Bus, Truck and Trailer