Application
This unit applies to the automotive and related component manufacturing environment and involves application of skills and knowledge at a specialist level. These skills and knowledge are to be used within the scope of the person's job and authority. |
Prerequisites
Not applicable.
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Install and test electrical/electronic units/assemblies | 1.1. Installation and testing activities are carried out according to OHS and organisation requirements 1.2. Installation requirements are determined 1.3. Appropriate tools, equipment, fittings and materials are selected for the installation and testing processes 1.4. Electrical units/assemblies are installed according to job requirements and manufacturer specifications |
2. Remove and replace electrical/electronic units/assemblies | 2.1. Removal information is accessed and interpreted from appropriate manufacturer specifications to determine procedures 2.2. Electrical units/assemblies are removed and replaced using approved methods, tools and equipment |
Required Skills
This describes the essential skills and knowledge and their level, required for this unit. |
Required skills |
speak clearly and directly in order to inform team members of completed work apply teamwork to a range of situations solve problems particularly in teams in order to meet performance indicators show initiative in adapting to changing work conditions or contexts particularly when working across a variety of work areas access, interpret and apply information on relevant organisation policies, procedures and instructions, particularly to assure that appropriate fittings are selected for different installations manage time when planning, preparing and organising work priorities take responsibility for organising own work priorities. |
Required knowledge |
relevant Occupational Health and Safety and Environmental regulations and organisation policies and procedures needed to carry out work in a manner which ensures the safety of people, equipment and the environment. technical work documentation covering procedures, specifications, schedules and work plans or equivalent quality system documentation covering instructions, procedures, performance indicators and review processes or equivalent cost minimisation/waste avoidance policies, procedures and practices environmental protection requirements relating to the disposal of waste material established communication channels and protocols problem identification and resolution techniques use of relevant tools and equipment installation or replacement procedures for electrical/electronic units/assemblies testing equipment and application procedures for electrical/electronic units/assemblies electrical circuit principles cable termination techniques |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Evidence of the following is essential: compliance with relevant legislative, regulations, standards, codes of practice and establish safe practices and organisation policies and procedures for managing personal work priorities maintaining a working knowledge of current work systems and practices working and communicating effectively and positively with others involved in the work applying, within authority, the requirements of the job or work role in relation to: achieving production goals achieving work quality goals responding positively to changing work requirements contributing effectively to cost reduction initiatives effectively applying problem solving techniques modify activities to cater for variations in organisation context and environment employ safe working practices install or replace electrical/electronic units/assemblies as per job sheet test installation. |
Context of and specific resources for assessment | assessment of the competency should take place in a safe working environment in a passenger motor vehicle manufacturing plant or simulated environment using tools/equipment/machinery required for the production process without undue disruption to the production process assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints. |
Method of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: assessment methods must confirm consistency and accuracy of performance (over time and in a range of organisation relevant contexts) together with application of underpinning knowledge assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application assessment may be applied under project related conditions (real or simulated) and require evidence of process assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts. | |
OHS requirements may include: | Legislation and regulations, organisational safety policies and procedures and may include: the use of personal protective equipment and clothing, rescue services, fire fighting organisation and equipment, first aid equipment, hazard and risk control and elimination, systems covering the use of hazardous materials and substances and manual handling procedures including lifting and carrying. |
Organisationrequirements may include: | access and equity principles and practices environmental management (waste disposal, recycling and re-use guidelines) emergency and evacuation procedures equipment use procedures ethical standards legal obligations maintenance and storage procedures OHS requirements organisational and site guidelines policies and procedures relating to own role and responsibility procedural manuals quality assurance guidelines quality and continuous improvement processes and standards recording and reporting guidelines. |
Tools and equipment may include: | hand tools, jacking, support and lifting equipment, power tools and air tools electrical test equipment - voltmeter, ampmeter, multimeter, resistance meter |
Sectors
Unit sector | Technical - Electrical and Electronic |
Competency Field
Manufacturing - Bus, Truck and Trailer |
Co-Requisites
Not applicable.
Employability Skills
This unit contains Employability Skills. |
Licensing Information
Not applicable.