Application
The unit applies to the automotive and related component manufacturing environment and involves application of skills and knowledge at a specialist level. These skills and knowledge are to be used within the scope of the person's job and authority. |
Prerequisites
Nil |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Plan and prepare | 1.1. Activities are carried out according to OHS and organisation requirements 1.2. Work instructions, including relevant inspection reports and forms and quality requirements are obtained, confirmed with appropriate personnel and applied 1.3. Tools and equipment selected are consistent with the requirements of the job, checked for serviceability and faults are rectified or reported prior to commencement 1.4. Materials appropriate to the work application are identified, obtained, prepared, safely handled and located ready for use |
2. Assess paintwork damage/defect | 2.1. Vehicle bodies/parts are inspected to confirm the extent and nature of paintwork damage or defects 2.2. Damaged or defective paintwork is analysed and assessed 2.3. Solution to repair the damage or defect is selected and planned |
3. Repair paintwork damage/defect | 3.1. Damaged or defective area is prepared for repair 3.2. Adjoining areas to the damaged/defective area are protected from the repair work procedures 3.3. Paint repair equipment and materials are selected and applied to damaged/defective areas 3.4. Drying method is selected and applied 3.5. Damaged or defective area is repaired to specifications 3.6. Documentation is completed outlining nature of problem, work conducted and outcome, in accordance with organisation requirements 3.7. Repaired vehicle is processed for inspection and returned to production sequence |
4. Clean up | 4.1. Work area is cleared and materials disposed of, reused or recycled in accordance with organisation requirements and cost reduction initiatives 4.2. Tools and equipment are cleaned, checked, maintained and stored in accordance with organisation requirements |
Required Skills
This section describes the essential skills and knowledge and their level, required for this unit. |
Required skills |
speak clearly and directly in order to inform team members of completed work stages apply teamwork to a range of situations solve problems particularly in teams in order to meet performance indicators show initiative in adapting to changing work conditions or contexts particularly when working across a variety of work areas access, interpret and apply information on relevant organisation policies, procedures and instructions, particularly to ensure documentation is properly completed manage time when planning, preparing and organising work priorities take responsibility for organising own work priorities. |
Required knowledge |
organisation and equipment safety requirements organisation production quality standards automotive industry terminology manufacturing and production procedures techniques for vehicle painting tools and equipment types, characteristics, usesand limitations paint viscosity and limitations paint damage and defects paint repair techniques and equipment processes for the calculation of materialrequirements material Safety Data Sheets plans, drawings and specifications materials handling, storage and environmentallyfriendly waste management organisation safety policies and procedures relevant Australian standards. |
Evidence Required
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Location, interpretation and application of relevantinformation, standards and specifications Compliance with organisation safety policies andprocedures and OHS legislation/regulations/codes ofpractice applicable to operations Compliance with organisation policies and proceduresincluding quality requirements Safe and effective operational use of tools andequipment Communication and working effectively and safelywith others Completion of analysis, assessment and rectification ofat least 2 separate and different paint damage incidentsand a minimum of 3 separate and different paintdefects, to specifications and organisation inspectionrequirements. |
Context of and specific resources for assessment | assessment of the competency should take place in a safe working environment in a passenger motor vehicle manufacturing plant or simulated environment using tools/equipment/machinery required for the production process without undue disruption to the production process assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints. |
Method of assessment | A range of assessment methods should be used to assess practical skills and knowledge. The following examples are appropriate for this unit: assessment methods must confirm consistency and accuracy of performance (over time and in a range of organisation relevant contexts) together with application of underpinning knowledge assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application assessment may be applied under project related conditions (real or simulated) and require evidence of process assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts. | |
OHS requirements may include: | Legislation and regulations, organisational safety policies and procedures and may include: the use of personal protective equipment and clothing, rescue services, fire fighting organisation and equipment, first aid equipment, hazard and risk control and elimination, systems covering the use of hazardous materials and substances and manual handling procedures including lifting and carrying. |
Organisationrequirements may include: | access and equity principles and practices environmental management (waste disposal, recycling and re-use guidelines) emergency and evacuation procedures equipment use procedures ethical standards legal obligations maintenance and storage procedures organisational and site guidelines policies and procedures relating to own role and responsibility procedural manuals quality assurance guidelines quality and continuous improvement processes and standards recording and reporting guidelines. |
Appropriatepersonnel may include: | clients and managers supervisors suppliers team leaders team members. |
Cost reduction initiatives may include: | continuous improvement programs cost benchmarks power conservation productivity achievement waste avoidance. |
Sectors
Unit sector | Automotive Manufacturing |
Competency Field
Passenger Motor Vehicle |
Co-Requisites
Nil |
Employability Skills
This unit contains Employability Skills. |
Licensing Information
Not applicable.