• AURE220140A - Manufacture and repair wiring harness/looms

AURE220140A
Manufacture and repair wiring harness/looms

This unit covers the competence to manufacture and repair wiring harness/looms, including checking/testing of wiring harness/looms, deciding preferred repair action and the removal, replacement and labelling of wiring harness/loom.

Application

The unit includes identification and confirmation of work requirement, preparation for work, manufacturing and repairing of harness/looms and completion of work finalisation processes, including clean-up and documentation.

This unit is also applicable to wiring harness/looms fitted to flammable goods vehicle.

Work requires individuals to demonstrate some judgement and problem-solving skills in managing own work activities and contributing to a productive team environment.

Work is carried out in accordance with award provisions.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Prepare for work

1.1. Work instructions are used to determine job requirement, including method, processes and equipment

1.2. Job specifications are read and interpreted

1.3. OHS requirements, including personal safety needs, are observed throughout the work

1.4. Equipment and tooling are identified and checked for safe and effective operation

1.5. Procedures are determined to minimise task time

2. Check/test wiring harness/loom and decide preferred repair action

2.1. Correct information is accessed and interpreted from manufacturer/component supplier specifications

2.2. Visual checks are carried out to establish the extent of damage

2.3. Tests are carried out to determine faults using tooling and techniques

2.4. Faults are identified and preferred repair action is determined

2.5. Checking/testing is achieved without causing damage to component or system

2.6. Checks and tests are carried out according to industry regulations/guidelines and OHS and enterprise/ procedures policies

3. Remove, replace and label wiring harness/loom

3.1. Correct information is accessed and interpreted from manufacturer/component supplier specifications

3.2. Wiring harness/loom is labelled and removed using tooling and techniques

3.3. Associated components are labelled, removed and tagged for storage

3.4. Repaired/remanufactured harness/loom is correctly refitted to vehicle and reconnected according to manufacturer/component supplier specifications and/or labels

3.5. Removal, replacement and labelling is completed without causing damage to component or system

3.6. Removal/replacement and labelling is completed according to industry regulations/guidelines, OHS and enterprise/ procedures policies

4. Repair wiring harness/loom

4.1. Correct information is accessed and interpreted from manufacturer/component supplier specifications

4.2. Repairs are carried out using tooling, techniques and materials

4.3. All repairs are carried out according to industry regulations/guidelines OHS and enterprise/procedures policies

5. Manufacture wiring harness/loom

5.1. Electrical circuit wiring diagrams are accessed and interpreted from manufacturer/component supplier specifications

5.2. Harness/loom is manufactured to approved specifications using tooling, techniques and materials

5.3. Harness/loom is tested prior to placing in service and results are documented in accordance with enterprise policies and procedures

5.4. Manufacturing activities are carried out according to industry regulations/guidelines, OHS and enterprise/ procedures policies

6. Clean up work area and maintain equipment

6.1. Workplace and equipment documents are completed in accordance with site requirements

6.2. Material that can be reused is collected and stored

6.3. Waste and scrap is removed following workplace procedures

6.4. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures

6.5. Unserviceable equipment is tagged and faults identified in accordance with workplace requirements

6.6. Operator maintenance is completed in accordance with manufacturer/component supplier specifications and site procedures

6.7. Tooling and equipment is maintained in accordance with workplace procedures

Required Skills

Required skills

collect, organise and understand information related to work orders, plans and safety procedures for repair/replacement/ manufacturing of wiring harness/looms

communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems

technical literacy and communication skills sufficient to interpret and apply common industry terminology, and interpret technical information and specifications related to the repair/replacement/manufacturing of wiring harness/looms

plan and organise activities, including preparation and layout of worksite and obtaining of equipment and material to avoid backtracking or workflow interruptions

work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity

use mathematical ideas and techniques to correctly complete installation, tests and measurements to ensure correct repair/manufacture of wiring harness/looms

use pre-checking and inspection techniques to anticipate planning and scheduling problems, avoid wastage of time and material

manipulative and dexterity skills to perform the repair/ manufacture of wiring harness/looms

problem-solving skills for a limited range of procedural issues

use workplace technology related to the manufacture and repair of wiring harness/looms, including the use of specialist tooling, measuring equipment, computerised technology and communication devices and the reporting/documenting of results

Required knowledge

A working knowledge of:

OHS regulations/requirement, equipment, material and personal safety requirements

interpreting wiring diagrams and graphic symbols

cable types/sizes, current carrying capacity and their application

wiring harness/loom checking and testing procedures (voltage drop and circuit performance)

fault identification and repair procedures

wiring harness/loom manufacture procedures

removing and replacing procedures for wiring harness/looms

work organisation and planning processes

enterprise quality processes

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspects of:

observing safety procedures and requirements

communicating effectively with others involved in or affected by the work

selecting methods and techniques appropriate to the circumstances

completing preparatory activity in a systematic manner

selecting and using material for repair/manufacture of wiring harness/looms

testing wiring harness/looms and locating faults

performing electrical connections, including crimping and soldering

removing and replacing wiring harness/looms

manufacturing wiring harnesses

repairing wiring harness/looms.

Context of, and specific resources for assessment

Application of competence is to be assessed in the workplace or simulated worksite.

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.

Assessment is to comply with regulatory requirements, including Australian Standards.

The following resources should be made available:

workplace location or simulated workplace

material relevant to the manufacture and repair of wiring harness/looms

equipment, hand and power tooling appropriate to the manufacture and repair of wiring harness/looms

activities covering mandatory task requirements

specifications and work instructions.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of AUR05 Automotive Industry's RS&R Training Package

Assessment methods must confirm consistency and accuracy of performance together with application of underpinning knowledge

Assessment must be by direct observation of tasks, with questioning on underpinning knowledge and it must also reinforce the integration of key competencies

Assessment may be applied under project related conditions and require evidence of process

Assessment must confirm a reasonable inference that competence is able to be under the particular circumstance, and is able to be transferred to other circumstances

It is preferable that assessment reflects a process rather than an event and occurs over a period of time to cover varying quality circumstances. Evidence of performance may be provided by customers, team leaders/members or other persons subject to agreed authentication arrangements

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role

Guidance information for assessment


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Wiring harness/looms

Wiring harness/looms may be fitted to light vehicles, plant and equipment, heavy commercial vehicles and marine applications.

Faults

Faults may include:

short and open circuits, shorts to ground, frayed wires, insulation damage, burnt wiring and broken harnesses

Manufacture and repair methods

Manufacture and repair methods are to include:

fault-finding using aural, visual and functional assessments for damage, corrosion, wear and electrical defects, testing and electrical measurements, identifying faults, reading/ interpreting wiring diagrams, repairing/replacing wiring and terminals, tagging disconnected components or wiring, soldering, crimping, harness/loom taping, adjustments and post-repair testing

Variables

Other variables may include:

fibre optics and multi flexing

Critical precautions

Critical precautions include:

manufacturer/component supplier procedures, which must be applied as poor working practices are likely to damage electronic system ECUs and/or other components

OHS requirements

OHS requirements are to be in accordance with legislation/regulations/codes of practice and enterprise safety policies and procedures, and may include:

protective clothing and equipment, use of tooling and equipment, workplace environment and safety, handling of material, use of fire fighting equipment, enterprise first aid, hazard control and hazardous materials and substances

Personal protective equipment

Personal protective equipment is to include that prescribed under legislation/regulation/codes of practice and workplace policies and practices

Safe operating procedures

Safe operating procedures are to include, but are not limited to:

the conduct of operational risk assessment and treatments associated with vehicular movement, toxic substances, electrical safety, machinery movement and operation, manual and mechanical lifting and shifting, working in proximity to others and site visitors

Emergency procedures

Emergency procedures related to this unit are to include but may not be limited to:

emergency shutdown and stopping of equipment, extinguishing fires, enterprise first aid requirements and site evacuation

Environmental requirements

Environmental requirements are to include but are not limited to:

waste management, noise, dust and clean-up management

Quality requirements

Quality requirements are to include, but are not limited to:

regulations, including Australian Standards, internal company quality policy and standards and enterprise operations and procedures

Statutory/regulatory authorities

Statutory/regulatory authorities may include:

federal, state/territory and local authorities administering acts, regulations and codes of practice

Tooling and equipment

Tooling and equipment may include:

hand tooling, cables of various types and sizes, electrical tape, terminals and fitting equipment

Materials

Materials may include:

spare parts, wire, tagging/labelling material and cleaning material

Communications

Communications are to include, but are not limited to:

verbal and visual instructions and fault reporting and may include site specific instructions, written instructions, plans or instructions related to job/task, telephones and pagers

Information/documents

Sources of information/documents may include:

verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets, diagrams or sketches

safe work procedures related to the manufacture and repair of wiring harness/looms

regulatory/legislative requirements pertaining to automotive industry, including Australian Design Rules

engineer's design specifications and instructions

organisation work specifications and requirements

instructions issued by authorised enterprise or external persons

Australian Standards


Sectors

Unit sector

Electrical


Employability Skills

This unit contains employability skills.


Licensing Information

Not Applicable