Application
This unit applies to individuals who undertake repair of outdoor power equipment engines which may be stationary or mobile, air and liquid cooled, overhead and side valve, 2- and 4-stroke spark ignition and 4-stroke compression ignition engines. For service and repair of light/heavy vehicle engines refer to AURT301166A Repair engines and associated engine components. |
Elements and Performance Criteria
ELEMENT | PERFORMANCE CRITERIA |
1. Prepare to repair engine | 1.1. Identify and confirm work to be carried out 1.2. Access and interpret repair procedures, workshop manuals and manufacturer information 1.3. Identify and prepare tools, equipment and materials required for repair operations 1.4. Set up work area |
2. Repair engine and engine components | 2.1. Identify and observe applicable occupational health and safety (OHS) requirements, including state/territory regulatory requirements and personal protection needs 2.2. Dismantle engine and components and inspect for wear and damage 2.3. Perform repair operations in accordance with workplace procedures and manufacturer/component supplier specifications 2.4. Assemble engine within manufacturer/component supplier specifications and tolerances 2.5. Apply appropriate lubricants to engine 2.6. Start engine and run up to operating temperature and check for leaks, abnormal noises and pressures where applicable 2.7. Make any adjustments as required and re-test 2.8. Complete workplace documentation and update customer and warranty information as required |
3. Complete work | 3.1. Inspect repaired unit to ensure protective guards, cowlings and safety features are in place 3.2. Clean engine to workplace expectations 3.3. Clean work area, dispose of waste, and store tools and equipment in accordance with workplace procedures |
Required Skills
Required skills |
Required skills include: technical skills to the level required to use workplace technology and tools related to repairing outdoor power equipment engines communication skills to the level required to confirm work requirements and specifications, to communicate effectively regarding work requirements with supervisor, other workers and customers, to report work outcomes and problems, and to relate to people from a range of social, cultural and ethnic backgrounds and of varying physical and mental abilities literacy skills to the level required to understand information related to work orders and to locate, interpret and apply manufacturer/component supplier information, workplace policies and procedures numeracy skills to the level required to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks problem-solving skills to the level required to plan and organise activities and establish safe and effective work processes which anticipate and/or resolve problems and downtime, and to systematically develop solutions to avoid or minimise reworking and avoid wastage team skills to the level required to work effectively and cooperatively with others to optimise workflow and productivity |
Required knowledge |
Required knowledge includes: construction and operating principles of two and four stroke spark ignition engines and four stroke compression ignition engines types and layout of service/repair manuals (hard copy and electronic) repair procedures and methodologies different repair requirements for different engines testing and adjustment procedures types of lubricants, application and methods of lubrication selection, checking and use of tooling and equipment manufacturer and/or component supplier specifications and tolerances applicable commonwealth, state or territory legislation, regulations, standards and codes of practice, including OHS and environment, relevant to repairing engines in outdoor power equipment organisational policies and procedures, including quality requirements, reporting and recording procedures, and work organisation and planning processes, related to repairing engines in outdoor power equipment |
Evidence Required
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. | |
Overview of assessment | |
Critical aspects for assessment and evidence required to demonstrate competency in this unit | Assessors must be satisfied that the candidate can competently and consistently: observe safety procedures and requirements communicate effectively with others involved in or affected by the work select repair methods and techniques appropriate to the circumstances complete preparatory activity in a systematic manner complete repairs to a range of engines and associated components to workplace and manufacturer/component supplier requirements complete repair of engine and associated components within workplace timeframes complete workplace records. |
Context of, and specific resources for assessment | The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment. Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints. Assessment is to comply with relevant regulatory requirements, including specified Australian standards. Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability. The following resources should be made available: a range of outdoor power equipment engines and components materials relevant to repairing engines equipment, hand and power tooling appropriate to repairing of outdoor power equipment engines specifications and work instructions. |
Method of assessment | Assessment must satisfy the endorsed Assessment Guidelines of this Training Package. Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge. Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application. Assessment may be applied under project-related conditions (real or simulated) and require evidence of process. Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances. Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role. |
Guidance information for assessment | Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed. |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. | |
Outdoor power equipment engines | Outdoor power equipment engines may include: stationary or mobile air and liquid cooled overhead and side valve 2- and 4-stroke spark ignition 4-stroke compression ignition |
Repair methods | Repair methods may include: on- and off-site repairs engine dismantling and reassembly repair and replacement of components testing and adjustments lubricating communicating with customers documenting and reporting on service |
Tooling and equipment | Tooling and equipment may include: specialist and general workshop equipment and tooling measuring equipment tuning equipment tensioning equipment lubricating equipment |
Materials | Materials may include: spare parts gaskets and sealant lubricants fluids cleaning materials |
Information/documents | Information/documents may include: verbal or written and graphical instructions, signage, work schedules/plans/specifications, work bulletins, memos, material safety data sheets (MSDS), diagrams or sketches safe work procedures related to repairing engines regulatory/legislative requirements pertaining to repairing engines engineer's design specifications and instructions organisation work specifications and requirements instructions issued by authorised enterprise or external persons Australian standards |
OHS requirements | OHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include: personal protective equipment and clothing safety equipment first aid equipment hazard and risk control elimination of hazardous materials and substances manual handling, including shifting, lifting and carrying emergency procedures |
Legislative requirements | Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include: award and enterprise agreements industrial relations Australian standards Australian Design Rules confidentiality and privacy OHS the environment equal opportunity anti-discrimination relevant industry codes of practice duty of care |
Environmental requirements | Environmental requirements may include: waste management pollution noise dust clean-up management |
Quality requirements | Quality requirements may include: regulations, including Australian standards internal organisational quality policies and procedures enterprise operations and procedures |
Organisational policies and procedures | Organisational policies and procedures may include: quality policies and procedures, including Australian standards OHS, sustainability, environment, equal opportunity and anti-discrimination manufacturer specifications and industry codes of practice safe work procedures reporting and recording procedures |
Sectors
Unit sector | Outdoor power equipment |
Employability Skills
This unit contains employability skills. |
Licensing Information
Refer to Unit Descriptor