AURR201104A
Service inboard engines and components

This unit of competency describes the skills and knowledge required to service inboard engines and components. It requires the ability to identify and confirm work requirements, service the inboard engines and to complete work finalisation processes. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Application

This unit applies to individuals who undertake and document the servicing of inboard engines and components in a marine environment.


Elements and Performance Criteria

ELEMENT

PERFORMANCE CRITERIA

1. Prepare for work

1.1. Confirm nature and scope of work to be carried out

1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices applicable to the work

1.3. Source service procedures and relevant workshop manuals and manufacturer's information

1.4. Check and prepare tools, equipment and materials

1.5. Decide service method in accordance with OHS, environmental and industry regulations, and guidelines and enterprise procedures

1.6. Set up work area

2. Service engine and engine components

2.1. Conduct service in accordance with manufacturer and component supplier specifications, and OHS and workplace environmental and sustainable procedures and practices

2.2. Conduct pre-start checks, make required adjustments and re-test

2.3. Apply appropriate lubricants to engine

2.4. Check that protective guards, cowlings and safety features are in place according to workplace expectations

2.5. Determine the need for water testing

3. Clean up work area and finalise work

3.1. Seal engine orifices against ingress of foreign matter

3.2. Clean engine according to workplace requirements

3.3. Clean and inspect equipment and tooling according to workplace requirements

3.4. Tag unserviceable equipment and faults identified in accordance with workplace requirements

3.5. Finalise and process work completion documentation, update customer and warranty information and give to appropriate persons as required

3.6. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures

Required Skills

Required skills

Required skills include:

technical skills to the level required to use workplace technology related to servicing of inboard engines and components, including use of workplace computerised technology for the testing, reporting and recording of results

communication skills to the level required to confirm work requirements and specifications, to communicate effectively regarding work requirements with supervisor, other workers and customers, to relate to people from a range of social, cultural and ethnic backgrounds and of varying physical and mental abilities, and to report work outcomes and problems

literacy skills to the level required to understand information related to work orders, including common industry terminology, plans and safety procedures, to interpret technical information and specifications and to prepare reports

numeracy skills to the level required to correctly calculate time, assess tolerances, apply accurate measurements, calculate material requirements and establish quality checks

problem-solving skills to the level required to identify technical and procedural problems to avoid planning and scheduling problems, and time and material wastage

team skills to the level required to work effectively and cooperatively with others to optimise workflow and productivity

Required knowledge

Required knowledge includes:

operating principles, construction and types of inboard engines

servicing procedures and methodologies for different engines types

minor adjustment procedures for different engines types

types of lubricants and application methods

service and repair manuals (hard copy and electronic)

manufacturer and component supplier specifications, including workshop manuals and repair guides related to the servicing of marine engines and engine components

applicable commonwealth, state or territory legislation, regulations, standards and codes of practice, including OHS, personal safety and environment, relevant to the servicing of inboard engines and components

organisational policies and procedures, including quality requirements, reporting and recording procedures related to servicing inboard engines and components

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Assessors must be satisfied that the candidate can competently and consistently:

observe safety procedures and requirements

communicate effectively with others involved in or affected by the work

select servicing methods and techniques appropriate to the circumstances

complete preparatory activity in a systematic manner

service a range of marine inboard engines and components to workplace and manufacturer requirements and within workplace timeframe

test prior to placing in service

complete workplace and equipment records and workplace clean-up requirements.

Context of, and specific resources for assessment

The application of competency is to be assessed in the workplace or a simulated environment that reflects as far as possible the actual working environment.

Assessment is to occur using standard and authorised work practices, safety requirements and environmental constraints.

Assessment is to comply with relevant regulatory requirements, including specified Australian standards.

Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate ethnicity, age, gender, demographics and disability.

The following resources should be made available:

appropriate worksite

a range of marine inboard engines and components requiring servicing

specifications and work instructions

equipment, hand and power tooling appropriate to repairing marine engines

relevant information, including manufacturer specifications.

Method of assessment

Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.

Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of Required Skills and Knowledge.

Assessment methods must be by direct observation of tasks and include questioning on Required Skills and Knowledge to ensure its correct interpretation and application.

Assessment may be applied under project-related conditions (real or simulated) and require evidence of process.

Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances.

Competence in this unit may be assessed in conjunction with other functional units which together form part of the holistic work role.

Guidance information for assessment

Assessment processes and techniques must be culturally sensitive and appropriate to the language and literacy capacity of the candidate and the work being performed.


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.

Inboard marine engines

Marine engines may include:

2-stroke petrol and diesel

4-stroke petrol and diesel

Vessels

Vessels may include:

single or multi-hull

inboard or outboard drive

Servicing methods

Servicing methods may include:

on- and off-site repairs

minor adjustments and operational testing

replacement of fluids and filters

Pre-start checking procedures

Pre-start checking procedures may include:

running to operating temperature

priming oil

checking engine fluid levels, including lubrication and coolant

checking fuel system for leaks

checking for abnormal noises

checking for pressures

checking gauges and warning devices for operation

Tooling and equipment

Tooling and equipment may include:

hand tools

testing equipment, including multimeters

power tools

air tools

specialist tools and equipment

lubricating equipment

measuring equipment

pressure gauges

vacuum gauges

manufacturer's special stools

Materials

Materials may include:

spare parts

lubricants

fluids

cleaning materials

Safe operating procedures

Safe operating procedures may include:

operational risk assessment and treatments

toxic substances

electrical safety

machinery movement and operation

manual and mechanical lifting and shifting

working in proximity to others

Information/documents

Information/documents may include:

verbal, written and graphical instructions issued by authorised internal and external persons

parts listing prices and catalogues

inventory systems

Repair Times manuals

material safety data sheets (MSDS)

diagrams or sketches

engineer's design specifications and instructions

manufacturer specifications

industry standards (e.g. American Boat and Yacht Council, National Marine, Manufacturer's Association and US Coast Guard)

industry codes of practice

Australian standards

workplace specifications and requirements

current driver's licence

Legislative requirements

Legislative requirements are to be in accordance with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice, and may include:

award and enterprise agreements

industrial relations

Australian standards

Australian Design Rules

confidentiality and privacy

OHS

the environment

equal opportunity

anti-discrimination

duty of care

OHS requirements

OHS requirements are to be in accordance with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:

personal protective equipment and clothing

safety equipment

first aid equipment

hazard and risk control

elimination of hazardous materials and substances

manual handling, including shifting, lifting and carrying

emergency procedures

road rules

safe driving policy

Environmental requirements

Environmental requirements may include:

waste management

noise

dust

clean-up management

Organisational policies and procedures

Organisational policies and procedures may include:

quality policies and procedures, including Australian Standards

OHS, sustainability, environment, equal opportunity and anti-discrimination

manufacturer specifications and industry codes of practice

safe work procedures

reporting and recording procedures


Sectors

Unit sector

Marine


Employability Skills

This unit contains employability skills.


Licensing Information

Refer to Unit Descriptor